10 best electrical wire staple gun

Finding your suitable electrical wire staple gun is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best electrical wire staple gun including detail information and customer reviews. Let’s find out which is your favorite one.

Product	Features	Editor's score	Go to site
	Arrow Fastener T72 Wire and Cable Staple Gun		Go to amazon.com
	Arrow Fastener T37 Wire and Cable Tacker		Go to amazon.com
	Stanley CT10X Heavy Duty Staple Gun/Cable Tacker		Go to amazon.com
	Gardner Bender MSG-501V Cable Boss Staple Gun		Go to amazon.com
	Gardner Bender MSG-501 Heavy-Duty Cable Boss Staple Gun, Professional Grade, Secures (NM) Coax, & Low-Volt Cable, Red		Go to amazon.com
	Mediabridge 8mm Cable Clips (400pcs, Black) 1625pc cartridges - For RG6 Tri/Quad Shield Coax, Cat7, 14-16AWG 4-Conductor & 12AWG 2-Conductor Speaker Wire (0.275"-0.3" Outer Diameter) (Part# RBC8B )		Go to amazon.com
	Stanley TR250 SharpShooter Plus Heavy-Duty Staple/Brad Nail Gun		Go to amazon.com
	Arrow Fastener T75 Wire and Cable Gun, Fits up to 1/2-Inch Wires		Go to amazon.com
	Gardner Bender MSG-501 Wire Fastening Staple Gun, 7" x 12.25" x 8"		Go to amazon.com
	Tacwise Z3-140L Heavy Duty Hand Tacker/Staple Gun for 1/4, 5/16, 3/8, 1/2 and 9/16 Inches Long Staples, Orange (0807)		Go to amazon.com

Related posts:

1. Arrow Fastener T72 Wire and Cable Staple Gun

Feature

Shoots large insulated staples
Professional grade quality
Features color coded, non slip grip
Wire guide included
For non-metallic sheathed cable 12/2-, 14/2-, and other wire up to 1/2-inch wide
Made in the USA
Works with 31/64-inch (12mm) insulated fastener and 19/31-inch insulated fastener

Description

The Arrow T72 is the ideal tool for professional installation of computer cable, dual RG-6 and non-metallic sheathed cable. The insulated C-UL-US listed staples meet current standards, are approved for jobsites, and wont crimp or damage the wire. This staple gun features an all chromed steel housing, hardened steel working parts, proven rear-load magazine, and a grooved wire guide and driving blade. Works with 31/64-inch (12mm) insulated fastener and 19/31-inch insulated fastener. Proudly made in the USA.

2. Arrow Fastener T37 Wire and Cable Tacker

Feature

Medium duty
All steel construction
Grooved driving blade
Patented jam-resistant mechanism
Uses Arrow T37 round crown staples (3/8-inch, 1/2-inch, 9/16-inch)
Made in the USA
Short span easy compression handle
Chrome finish resists wear and tear

Description

Arrows T37 wire staple gun is a specialty tool for professionals installing thermostats and low voltage communication wires in residential or commercial applications. The T37s durable chromed steel finish, jam-resistant mechanism, time-tested rear-load magazine, and hardened steel working parts ensure years of service in even the most demanding applications. A grooved wire guide and driving blade help to prevent wire damage. Uses Arrow T37 round crown staples (3/8-inch, 1/2-inch, 9/16-inch). Proudly made in the USA.

3. Stanley CT10X Heavy Duty Staple Gun/Cable Tacker

Feature

Heavy-duty steel construction fastens low-Voltage wires or cables up to 1/4-Inch diameter
Cushioned grip and convenient handle lock deliver safety and comfort
Wire guide ensures fast, sure placement of staples. Curved driver protects wire from damage
All steel construction. Uses 3/8-Inch- 9/16-Inch Stanley CT100 series or Arrow T-25 cable staples
Limited Lifetime Warranty

Description

CT10X Features: -Cable tacker. -Material: Steel. -Cushioned grip and convenient handle lock deliver safety and comfort. -Wire guide ensures fast and sure placement of staples. Type of Stapler: -Framing Staplers. Generic Dimensions: -1.9" H x 8.2" W x 9.5" D, 1.8 lbs. Dimensions: Overall Height - Top to Bottom: -1.9 Inches. Overall Width - Side to Side: -8.2 Inches. Overall Depth - Front to Back: -9.5 Inches. Overall Product Weight: -1.8 Pounds.

4. Gardner Bender MSG-501V Cable Boss Staple Gun

Feature

It is Cable Boss Staple Gun Secures 120V & Low Volt Cable Romex Coaxial & Cat 5
From The Same Tool Comfort Grip Areas For 2 Handed Operation
Easy Trigger Force Ergonomic Handle Secures Round

Description

It is Cable Boss Staple Gun Secures 120V & Low Volt Cable Romex Coaxial & Cat 5 From The Same Tool Comfort Grip Areas For 2 Handed Operation Easy Trigger Force Ergonomic Handle Secures Round & Flat Cable 3 Sizes Covering Nm Coax Voice/Data & Low Volt.

5. Gardner Bender MSG-501 Heavy-Duty Cable Boss Staple Gun, Professional Grade, Secures (NM) Coax, & Low-Volt Cable, Red

Feature

Comfort grip areas for 2-handed operation
Heavy-duty rugged construction, ergonomic handle with an easy trigger force; staple gun requires 55 lbs. of pressure
Secures 120V and low-volt cable: Romex, Coaxial and CAT5 from the same tool
Staple guide ensures full insertion of the staple into the wood without damage to the cable insulation
3 sizes covering NM, Coax, Voice/Data and Low-Volt Staples

Description

Easily secure both low voltage coaxial cable and data wire with the CableBoss Staple Gun. Designed with lever trigger force and a comfortable ergonomic handle for superior ease of use. Secure a variety of cable, including 120V & low-volt cable, coaxial & CAT 5 all from the same tool with the CableBoss Staple Gun.

6. Mediabridge 8mm Cable Clips (400pcs, Black) 1625pc cartridges - For RG6 Tri/Quad Shield Coax, Cat7, 14-16AWG 4-Conductor & 12AWG 2-Conductor Speaker Wire (0.275"-0.3" Outer Diameter) (Part# RBC8B )

Feature

INTENDED FOR USE WITH: MediabridgeTM RG6 Tri/Quad Shield Coax, Cat7, 14-16AWG 4-Conductor & 12AWG 2-Conductor Speaker Wire (0.275"-0.3" Outer Diameter). See below for list of supported clip guns (SOLD SEPARATELY)
WOOD, MORTAR & SOFT MASONRY: Suitable For Indoor & Outdoor Use On Common Surfaces Like Wood, Mortar Joints & Soft Masonry
LONG-LASTING: Round Shanked Nails Will Not Kink, Bend, Or Turn
UV STABILIZED HOUSING: High-Density Polyethylene Clip Housings Are UV-Stabilized For Long life
IMPACT STRENGTH: Each Clip Contains 2 Recessed, Galvanized Nails To Be Driven 3/8" Into The Wooden Surface. COLOR-CODED HARDENED NAILS: Each Clip Is Color Coded For Quick Identification

Description

MediabridgeTM Cable Clips

When paired with a MediabridgeTM Clip Gun (sold separately), these Cable Clips are ideal for everyday cable routing needs. Manufactured from a lightweight, yet very durable hard plastic & virtually eliminates cable damage due to crimping, pinching, or piercing. The clips are easy to load & install onto wood, mortar joints or soft masonry. Each clip is color coded for quick identification

Product Features
- WOOD, MORTAR & SOFT MASONRY: Suitable For Indoor & Outdoor Use On Common Surfaces Like Wood, Mortar Joints & Soft Masonry
- LONG-LASTING: Round Shanked Nails Will Not Kink, Bend, Or Turn
- UV STABILIZED HOUSING: High-Density Polyethylene Clip Housings Are UV-Stabilized For Long life
- IMPACT STRENGTH: Each Clip Contains 2 Recessed, Galvanized Nails To Be Driven 3/8" Into The Wooden Surface
- COLOR-CODED HARDENED NAILS: Each Clip Is Color Coded For Quick Identification

Compatibility
- Supported Cable Outer Diameter: 7mm (0.275") ~ 7.5mm(0.3")
- Supported Clip Gun: MRB2 (SOLD SEPARATELY)
- Supported Cables: MediabridgeTM RG6 Tri/Quad Shield Coax, Cat7, 14-16AWG 4-Conductor & 12AWG 2-Conductor Speaker Wire

Installation
While pinching the Clip Gun's (sold separately) rear tabs, pull out the spring-loaded cartridge. Then, grab a strip of MediabridgeTM cable clips & push them into the Clip Gun. Lastly, push the spring-loaded cartridge back in & begin using your Cable Clips

Package Contents
400 Cable Clips (16 25 pc cartridges)

Warranty
Limited 1 Year Warranty

7. Stanley TR250 SharpShooter Plus Heavy-Duty Staple/Brad Nail Gun

Feature

Easy-squeeze product works overtime as a staple gun, brad nailer, cable tacker and wire tacker
All-metal drive channel ensures better penetration
Less force to squeeze and more driving power
Limited Lifetime Warranty
Heavy duty aircraft-aluminum housing for long-lasting durability. Hi/Lo power lever for hard and soft materials. Flush-nose design solves the problem of stapling in tight spots

Description

Stanley Hand Tools is a brand of hand tools. It is a division of Stanley Black & Decker, following the 2010 merger of The Stanley Works with Black & Decker

8. Arrow Fastener T75 Wire and Cable Gun, Fits up to 1/2-Inch Wires

Feature

All steel construction, chrome finish
Designed for a wide range of wire and cable fastening applications
Ideally suited for fastening inside wiring cable up to 26-pair and Romex cable up to 12-3
Driving blade halts staple at safe height to prevent cutting into wire or cable covering
Uses 9/16", 5/8", and 7/8" staples
Made in the USA

Description

The T75 is the ideal solution for installing non-metallic sheathed cable in new residential buildings. It can dramatically reduce both installation time and wire damage. The double leverage operation and contoured rubber hand grip make operation easy. Great for installing wire up to ". The T75, with its all chromed steel housing, hardened steel working parts, powerful coil spring, and rear-load magazine is proudly made in America.

9. Gardner Bender MSG-501 Wire Fastening Staple Gun, 7" x 12.25" x 8"

Feature

Power Tools/Hand Tools
wire-fastening-staple-gun
Dimensions: 7 X 12.25 X 8
Made in: United States

Description

Three Times Faster Than A Hammer Fastens Three Insulated Staple Sizes Front Grip Area For Two-Handed Operation - Manufacturer: Gardner Bender

10. Tacwise Z3-140L Heavy Duty Hand Tacker/Staple Gun for 1/4, 5/16, 3/8, 1/2 and 9/16 Inches Long Staples, Orange (0807)

Feature

High quality hand tacker/staple gun
Ultra light polymer construction
Takes staples sizes 1/4, 5/16, 3/8, 1/2 and 9/16 inches long
Perfect for tradesman/DIY wanting to perform high volume stapling or over head stapling due to weight
Includes belt hook and personalization window

Description

The Tacwise Z3-140L Heavy Duty Hand Tacker/Staple Gun is a high quality tacker firing 140 (T50 type) flat wire staples. It uses staples between 1/4 and 9/16 inches long. This hand tacker is easy and effortless to use due to the Tacwise linear power curve technology. Loaded with features, the Tacwise Z3-140L includes a belt hook and personalization window and is lightweight at only 0.88 lbs. Loaded with features, the Tacwise Z3-140L includes a belt hook and personalization window and is perfect for tradesman/DIY wanting to perform high volume stapling or over head stapling due to weight. Tacwise is a new brand of rugged tools and accessories for the professional tradesman. The professional, Tacwise brand has evolved from 40 years of power tool know-how to best reflect the powerful and durable nature of the new products -which are high quality, feature packed and hard wearing with a robust and practical design.

Conclusion

By our suggestions above, we hope that you can found the best electrical wire staple gun for you. Please don't forget to share your experience by comment in this post. Thank you!