10 best floor jack cross beam
Finding your suitable floor jack cross beam is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best floor jack cross beam including detail information and customer reviews. Let’s find out which is your favorite one.
1. 2-Pack of Rubber Jack Pads (Slotted) - Universal, Standard-Size - Frame Rail Protector
Feature
Sits on top of your jack to provide protection and cushion when lifting your car - no more damage to contact areas or deterioration of your jackMade from highly durable rubber and sized to fit a wide array of automobiles
Universal size and shape fits most jacks and vehicles, though exact compatibility may vary
Pad dimensions: 7.2 cm / 2.8 inches in diameter, 3.3cm / 1.3 inches tall. 2 per pack
Backed by our 100% manufacturer's warranty - if you aren't happy for any reason, return it for a full refund
Description
Sits on top of your jack to provide protection and cushion when lifting your car - no more damage to contact areas or deterioration of your jack. Made from highly durable rubber and sized to fit a wide array of automobiles. Universal size and shape fits most jacks and vehicles, though exact compatibility may vary. Pad dimensions: 7.2 cm / 2.8 inches in diameter, 3.3cm / 1.3 inches tall. 2 per pack. Backed by our 100% manufacturer's warranty - if you aren't happy for any reason, return it for a full refund.2. Steel Floor Jack Cross Beam from TNM
Feature
For use with most Pittsburgh steel floor jacks and most floor jacks with a removeable saddleProvides longer contact point for increased stability and distributes weight to prevent undercarriage damage
Can be used to lift entire side, front or rear of vehicle
Adjusts from 28 in. to 37 in. wide
5 in. x 5 in. rubberized lifting plates adjust for additional height
Description
Replace the saddle on your floor jack with this floor jack cross beam to balance and stabilize vehicles. Distributes weight to prevent damage to undercarriage. Our floor jack cross beam works with most floor jacks3. Dragway Tools 2 Ton Cross Beam Adapter for Floor Jacks Engine Hoist Shop Crane
Feature
Maximum Capacity: 4,000 lbs.Extends from 28-inch minimum to 40-inch maximum.
4-3/4-inch adjustable (up and down) rubber pad mounts.
Center shaft measures 1-1/4 in. x 3/4 in. with a bolt washer mount.
Frame is made of 1/8-inch steel.
Description
Dragway Tools 2 Ton Cross Beam Adapter for Floor Jacks Engine Hoist Shop Crane
Dragway Tools two-ton cross beam adapter for floor jacks. The adapter has a maximum capacity of 4,000 lbs. and will extend from 28 in. to 40 in.
- Maximum Capacity: 4,000 lbs.
- Extends from 28-inch minimum to 40-inch maximum.
- 4-3/4-inch adjustable (up and down) rubber pad mounts.
- Features two (2) 11-inch safety chains.
- Center shaft measures 1-1/4 in. x 3/4 in. with a bolt washer mount.
- Frame is made of 1/8-inch steel.
4. Champ 2 Ton Cross Beam Jack Adapter
Feature
Provides additional stability. Saddles adjust from 23" to 32" on centerFits most standard floor jacks. Threaded pad design provides an additional 2" adjustment
Rubber lift pads for better stability. Lifts FWD vehicles without axle beam
Use to lift cars at rocker panels for simultaneous wheel service. Heavy steel construction for maximum durability
Lifting capacity: 4,500 lbs. / 2000 Kg. Mounting peg size: 1-3/16" round x 1"
Description
Made in USA. Floor jack NOT INCLUDED.5. Steel Floor Jack Cross Beam
Description
Steel Floor Jack Cross Beam Use this cross beam with your floor jack to balance and stabilize loads Replace the saddle on your floor jack with this floor jack cross beam to balance and stabilize vehicles. Distributes weight to prevent damage to undercarriage. Our floor jack cross beam works with most floor jacks. The beam member adjusts from 28 inch to 37 inch wide. Adjustable pads on each end of the floor jack cross beam provide additional lift. For use with most steel floor jacks and most floor jacks with a removeable saddle. Provides longer contact point for increased stability and distributes weight to prevent undercarriage damage. Can be used to lift entire side, front or rear of vehicle. Adjusts from 28 inch to 37 inch wide5" x 5" rubberized lifting plates adjust for additional height. Heavy duty welded steel construction. Includes 9" safety chain Steel Floor Jack Cross Beam HBFT# 60762 Quantity: 1 Product Height: 5 inch Product Length: 28 inch Product Weight: 25.2 pound Product Width: 5 inch Shipping Weight: 27.50 pound Size(s): 2 Ton Warranty: 90 Day6. OEMTOOLS 24833 Floor Jack Crossbeam
Feature
Compatible with any floor jack that has a 1?1/8"Saddles adjust from 23" to 32" on center
Threaded pad design provides an additional 2" adjustment
Rubber lift pads for even better stability
Lifts FWD vehicles without axle beam
Description
When used in conjunction with most standard garage floor jacks, the OEMTOOLS Floor Jack Crossbeam greatly reduces the chance of undercarriage metal damage and provides stability for the entire front, rear or side of a lifted vehicle.7. Million Parts Hydraulic Shop Press Heavy Duty H Frame Floor Press Jack Stand Equipment 12 Ton Capacity
Feature
Load Capacity: 12 Ton; Ideal for for metal bending, fixing seized parts, bearing replacement and so onTable Height: Adjustable in 4-3/4" Increments; Press Plates: 7-1/2" x 3-1/2" (L x W)
Overall Height: 51"; Heavy duty springs loaded retracting ram carriage
Bolted adjustable cross beams easily raise and lower for an ideal working distance
The tables can be quickly adjusted for height and each includes table plates
Description
This Hydraulic Shop Press Floor Press adopts hydraulic transmission, highly specialized integrated valve block and large flow path, makes the system less pressure loss, sealed performance is good.
Specifications:
1. Material: Iron
2. Color: Black
3. Load Capacity: 12 ton
4. Overall Height: 51"
5. Weight: 88 lbs / 40 kg
6. Table Height: Adjustable in 4-3/4" Increments
7. Press Plates: 7-1/2" x 3-1/2" (L x W)
Package Included:
1 x Hydraulic Press
8. Vestil FJB-100 Basement Floor Jack, 54" - 100" Height Range, Maximum Height Capacity (lbs.) 5600, Minimum Height Capacity (lbs.) 8438
Feature
Jack provides support for leveling and stabilizing floor beamsThe telescopic style positions the brace for better leveling
Includes a screw and turning bar for easy height adjustment
Steel construction with red oxide finish for optimal durability
The hardware is shipped inside the tube to ensure that it is not lost
Description
This Vestil welded steel floor jack post (also called a basement floor jack) has a red oxide coating, a screw turning bar, and dual-lock pins, and it extends telescopically for temporarily leveling, bracing, and stabilizing floor beams and joists during construction or repairs. The floor jack post can be adjusted and set to any height within the given range, allowing it to be used in applications with different height requirements. Welded steel provides strength. A turning bar and screw bolt are used to adjust the floor jack post's height, and two dual-lock pins secure the floor jack post at the desired height. When opening the product, the pins can be found inside the tube secured in a cardboard casing. The floor jack post has a diameter of 3". Both end plates are pre-drilled and measure 3-1/2 x 6 inches. The floor jack post should be installed on a concrete floor or concrete footing, with either end up.
Basement floor jacks, or jack posts, temporarily secure floor beams and joists in construction and industrial applications; they should not be used as permanent supports in new construction. Floor jack posts are typically made of steel for strength. They consist of an adjustable post and two end plates. The height of a floor jack post is adjusted using a screw and the post is held at the desired height with a series of pins. The bottom end plate must be installed on a concrete floor or concrete footing. Bolts must be used to secure each end plate to the structure the post is supporting, and a floor jack post's end plates may or may not have pre-drilled holes for these bolts.
Vestil Manufacturing Corp. manufactures materials handling equipment, including jib and gantry cranes, loading dock equipment, and storage solutions. The company, founded in 1968, is headquartered in Angola, IN.
9. Hydraulic Jack Shop Press Floor Adjustable Heavy Duty Excellent Bending Stand 12 Ton Equipment H-Frame Plates - House Deals
Feature
12 Ton H Frame Industrial Heavy Duty Floor Shop Press Hydraulic Jack Excellent Bending High Quality Stand EquipmentBolted Adjustable Cross Beams Easily Raise & Lower
Tables Quickly Can Be Adjusted For Height & Includes Table Plates
Heavy Duty Springs Loaded Retracting Ram Carriage
It comes only with House Deals unique E-BooK
Description
12 Ton H Frame Industrial Heavy Duty Floor Shop Press Hydraulic Jack Excellent Bending High Quality Stand Equipment It comes only with House Deals unique E-BooK Easily Install Bearings, & Pulleys Seals, Bushings . Straighten Axles, Shafts, & Rods. Best for Bending - Bonding Or Straightening Applications Specifications Material: Steel Load Overall Height: 51" Weight: 95 Lbs Work Distance: 0-19.6"-54cm Bolted Adjustable Cross Beams Easily Raise & Lower10. Steel Floor Jack Cross Beam
Recent Comments