Best banjo drape to buy in 2022
We spent many hours on research to finding banjo drape, reading product features, product specifications for this guide. For those of you who wish to the best banjo drape, you should not miss this article. banjo drape coming in a variety of types but also different price range. The following is the top 10 banjo drape by our suggestions:
1. 8 Ft. High x 4 Ft. Wide Banjo Drape Panel (For Pipe and Drape Displays and Backdrops) - White (off white)
Feature
8 feet tall (sewn 2 inches shorter, to a finished height of 94 inches) x 48 inches wide drape with 4 inch pole pocket sewn into the top and bottom.Sewn 2 inches shorter to avoid dragging on the floor when used at an 8 foot height.
100% Polyseter drape is Inherently Flame Retardant and passes NFPA 701 fire code.
Listing is for (1) drape. Hardware parts (pipes and bases) sold separately.
Drape is sewn flat (not pleated) and can be gathered by hand on a drapery rod to achieve a gathered / bunched look. 4 drapes are recommended per 10 foot wide span.
Description
This lighter weight fabric has an open weave pattern with shiny (almost sparkling) specks where the threads are thickest. Commonly used for pipe and drape displays in convention centers.Quantity 1 = 1 drape. The drape is not sewn with pleats; it is sewn flat and can be gathered by hand on a drapery rod using one of the 4 inch pole pockets (sewn on both the top and bottom of the drape). A minimum of 4 drapes are recommended per 10 foot wide span.
Fabric has a usable selvedge on both sides.
Fabric blocks approximately 60% of light. This estimate is approximate for use under normal conditions, and with adequate gathering (bunching). Many factors can affect the opacity, including the amount of lighting, the amount of gathering (bunching), spacing from a wall, and the overall brightness of the lighting in a room. Using the drape near a wall makes it more opaque than if it's used in front of a window with sunlight shining through. In situations with a lot of lighting, you can help make it more opaque by adding an extra drape panel or two. A minimum of 4 drapes for every 10 foot wide span is recommended.
Care Instructions: Machine wash like colors on cold, using a gentle cycle. If needed, use only a mild liquid detergent applied to the water prior to placing drape in the machine -- never put concentrated detergent directly into contact with the fabric as it may alter the color. Can be machine dried (air only setting), and ironed (cool setting). NEVER EXPOSE THE DRAPE TO TEMPERATURES ABOVE 140F DURING ANY PORTION OF LAUNDERING. Doing so can significantly shrink and/or permanently wrinkle the fabric.
Please note: the colors shown in the listing are for reference only and may not be exact as different browsers, monitors, and settings will show colors differently. Free sample swatches are available upon request prior to ordering.
2. 3 Ft. High x 4 Ft. Wide Banjo Drape Panel (For Pipe and Drape Displays and Backdrops) - Black
Feature
3 feet tall (sewn 2 inches shorter, to a finished height of 34 inches) x 48 inches wide drape with 4 inch pole pocket sewn into the top and bottom.Sewn 2 inches shorter to avoid dragging on the floor when used at a 3 foot height.
100% Polyseter drape is Inherently Flame Retardant and passes NFPA 701 fire code.
Listing is for (1) drape. Hardware parts (pipes and bases) sold separately.
Drape is sewn flat (not pleated) and can be gathered by hand on a drapery rod to achieve a gathered / bunched look. 4 drapes are recommended per 10 foot wide span.
Description
This lighter weight fabric has an open weave pattern with shiny (almost sparkling) specks where the threads are thickest. Commonly used for pipe and drape displays in convention centers.Quantity 1 = 1 drape. The drape is not sewn with pleats; it is sewn flat and can be gathered by hand on a drapery rod using one of the 4 inch pole pockets (sewn on both the top and bottom of the drape). A minimum of 4 drapes are recommended per 10 foot wide span.
Fabric has a usable selvedge on both sides.
Fabric blocks approximately 60% of light. This estimate is approximate for use under normal conditions, and with adequate gathering (bunching). Many factors can affect the opacity, including the amount of lighting, the amount of gathering (bunching), spacing from a wall, and the overall brightness of the lighting in a room. Using the drape near a wall makes it more opaque than if it's used in front of a window with sunlight shining through. In situations with a lot of lighting, you can help make it more opaque by adding an extra drape panel or two. A minimum of 4 drapes for every 10 foot wide span is recommended.
Care Instructions: Machine wash like colors on cold, using a gentle cycle. If needed, use only a mild liquid detergent applied to the water prior to placing drape in the machine -- never put concentrated detergent directly into contact with the fabric as it may alter the color. Can be machine dried (air only setting), and ironed (cool setting). NEVER EXPOSE THE DRAPE TO TEMPERATURES ABOVE 140F DURING ANY PORTION OF LAUNDERING. Doing so can significantly shrink and/or permanently wrinkle the fabric.
Please note: the colors shown in the listing are for reference only and may not be exact as different browsers, monitors, and settings will show colors differently. Free sample swatches are available upon request prior to ordering.
3. 12 Ft. High x 4 Ft. Wide Banjo Drape Panel (For Pipe and Drape Displays and Backdrops) - Black
Feature
12 feet tall (sewn 2 inches shorter, to a finished height of 142 inches) x 48 inches wide drape with 4 inch pole pocket sewn into the top and bottom.Sewn 2 inches shorter to avoid dragging on the floor when used at a 12 foot height.
100% Polyseter drape is Inherently Flame Retardant and passes NFPA 701 fire code.
Listing is for (1) drape. Hardware parts (pipes and bases) sold separately.
Drape is sewn flat (not pleated) and can be gathered by hand on a drapery rod to achieve a gathered / bunched look. 4 drapes are recommended per 10 foot wide span.
Description
This lighter weight fabric has an open weave pattern with shiny (almost sparkling) specks where the threads are thickest. Commonly used for pipe and drape displays in convention centers.Quantity 1 = 1 drape. The drape is not sewn with pleats; it is sewn flat and can be gathered by hand on a drapery rod using one of the 4 inch pole pockets (sewn on both the top and bottom of the drape). A minimum of 4 drapes are recommended per 10 foot wide span.
Fabric has a usable selvedge on both sides.
Fabric blocks approximately 60% of light. This estimate is approximate for use under normal conditions, and with adequate gathering (bunching). Many factors can affect the opacity, including the amount of lighting, the amount of gathering (bunching), spacing from a wall, and the overall brightness of the lighting in a room. Using the drape near a wall makes it more opaque than if it's used in front of a window with sunlight shining through. In situations with a lot of lighting, you can help make it more opaque by adding an extra drape panel or two. A minimum of 4 drapes for every 10 foot wide span is recommended.
Care Instructions: Machine wash like colors on cold, using a gentle cycle. If needed, use only a mild liquid detergent applied to the water prior to placing drape in the machine -- never put concentrated detergent directly into contact with the fabric as it may alter the color. Can be machine dried (air only setting), and ironed (cool setting). NEVER EXPOSE THE DRAPE TO TEMPERATURES ABOVE 140F DURING ANY PORTION OF LAUNDERING. Doing so can significantly shrink and/or permanently wrinkle the fabric.
Please note: the colors shown in the listing are for reference only and may not be exact as different browsers, monitors, and settings will show colors differently. Free sample swatches are available upon request prior to ordering.
4. 10 Ft. High x 4 Ft. Wide Banjo Drape Panel (For Pipe and Drape Displays and Backdrops) - Gold
Feature
10 feet tall (sewn 2 inches shorter, to a finished height of 118 inches) x 48 inches wide drape with 4 inch pole pocket sewn into the top and bottom.Sewn 2 inches shorter to avoid dragging on the floor when used at a 10 foot height.
100% Polyseter drape is Inherently Flame Retardant and passes NFPA 701 fire code.
Listing is for (1) drape. Hardware parts (pipes and bases) sold separately.
Drape is sewn flat (not pleated) and can be gathered by hand on a drapery rod to achieve a gathered / bunched look. 4 drapes are recommended per 10 foot wide span.
Description
This lighter weight fabric has an open weave pattern with shiny (almost sparkling) specks where the threads are thickest. Commonly used for pipe and drape displays in convention centers.Quantity 1 = 1 drape. The drape is not sewn with pleats; it is sewn flat and can be gathered by hand on a drapery rod using one of the 4 inch pole pockets (sewn on both the top and bottom of the drape). A minimum of 4 drapes are recommended per 10 foot wide span.
Fabric has a usable selvedge on both sides.
Fabric blocks approximately 60% of light. This estimate is approximate for use under normal conditions, and with adequate gathering (bunching). Many factors can affect the opacity, including the amount of lighting, the amount of gathering (bunching), spacing from a wall, and the overall brightness of the lighting in a room. Using the drape near a wall makes it more opaque than if it's used in front of a window with sunlight shining through. In situations with a lot of lighting, you can help make it more opaque by adding an extra drape panel or two. A minimum of 4 drapes for every 10 foot wide span is recommended.
Care Instructions: Machine wash like colors on cold, using a gentle cycle. If needed, use only a mild liquid detergent applied to the water prior to placing drape in the machine -- never put concentrated detergent directly into contact with the fabric as it may alter the color. Can be machine dried (air only setting), and ironed (cool setting). NEVER EXPOSE THE DRAPE TO TEMPERATURES ABOVE 140F DURING ANY PORTION OF LAUNDERING. Doing so can significantly shrink and/or permanently wrinkle the fabric.
Please note: the colors shown in the listing are for reference only and may not be exact as different browsers, monitors, and settings will show colors differently. Free sample swatches are available upon request prior to ordering.
5. Pipe and Drape Banjo Backdrop Kit 3 ft. x 10 ft. - Snow White
Feature
Premium quality free standing 3 foot tall x 10 foot wide Pipe and Drape Kit.Includes 2 Uprights, 1 Support Rod, 2 Bases, and 4 Drapes.
Banjo drape is Inherently Flame Retardant and passes NFPA 701 fire code.
Portable and light weight.
Quick set-up in just minutes!
Description
This free standing pipe and drape section comes with all the parts needed to create a 3 ft. tall x 10 ft. wide span:Qty 2 - 3 foot tall fixed Upright (Silver) with silver cap on top
Qty 1 - Adjustable 6-10 foot wide Support Rod (Silver)
Qty 2 - 8 inch x 14 inch steel Base (Silver), 6 pounds with Base Pin
Qty 4 - 34 inch tall x 48 inch wide Banjo drape (Snow White)
*Drapes are sewn 2 inches shorter than 3 feet tall to avoid dragging on the floor.
Note: Different browsers and monitors show colors differently. Swatches shown in listing are for reference only. Swatch samples can be mailed upon request. Dye lots may vary on future orders.
6. Pipe and Drape Banjo Backdrop Kit 8 ft. x 50 ft. - Black
Feature
Premium quality free standing 8 foot tall x 30 to 50 foot wide Pipe and Drape Kit.Includes 6 Uprights, 5 Support Rods, 6 Bases, and 20 Drapes.
Drape is Inherently Flame Retardant and passes NFPA 701 fire code.
Easily create an 8 foot tall span up to 50 feet wide (all connecting together).
Quick set-up in just minutes!
Description
This free standing pipe and drape section comes with all the parts needed to create an 8 ft. tall x 30-50 ft. wide span (all connecting together):Qty 6 - 8 foot tall fixed Upright (Silver)*
Qty 5 - Adjustable 6-10 foot wide Support Rod (Silver)
Qty 6 - 16 inch x 14 inch steel Base (Silver), 10 pounds with Base Pin
Qty 20 - 94 inch tall x 48 inch wide Banjo Drape (Black)
*Uprights are fixed height (one piece; they do not break down or adjust in height). If you travel with your set-up, please ensure that you are able to transport an 8 foot pipe. Also, please ensure that the ceiling height will be tall enough for an 8 foot tall display.
Note: Drapes are sewn 2 inches shorter than 8 feet tall to avoid dragging on the floor.
Fabric blocks approximately 60% of light. This estimate is approximate for use under normal conditions. Many factors can affect the opacity, including the amount of lighting, the amount of gathering (bunching), spacing from a wall, and the overall brightness of the lighting in a room. In situations with a lot of lighting, you can help make it more opaque by adding an extra drape panel or two per 10 foot wide span.
Care Instructions: Machine wash like colors on cold, using a gentle cycle. If needed, use only a mild liquid detergent applied to the water prior to placing drape in the machine -- never put concentrated detergent directly into contact with the fabric as it may alter the color. Can be machine dried (air only setting), and ironed (cool setting). NEVER EXPOSE THE DRAPE TO TEMPERATURES ABOVE 140F DURING ANY PORTION OF LAUNDERING. Doing so can significantly shrink and/or permanently wrinkle the fabric.
Note: Different browsers and monitors show colors differently. Swatches shown in listing are for reference only. Swatch samples can be mailed upon request. Dye lots may vary on future orders.
7. Adjustable Pipe and Drape Banjo Backdrop Kit 14 ft. x 50 ft. - Snow White
Feature
Premium quality free standing adjustable 8 to 14 foot tall x 30 to 50 foot wide Pipe and Drape Kit.Includes 6 Uprights, 5 Support Rods, 6 Bases, and 20 Drapes.
Drape is Inherently Flame Retardant and passes NFPA 701 fire code.
Easily create a backdrop up to 14 feet tall and 50 feet wide (connecting together; single span).
Quick set-up in just minutes!
Description
This free standing pipe and drape section comes with all the parts needed to create an adjustable 8 to 14 ft. tall x 30 to 50 ft. wide span (all connecting together):Qty 6 - Adjustable 8-14 foot tall telescoping Upright (Silver), 2 inch diameter with Button Stops & Locking Clamp
Qty 5 - Adjustable 6-10 foot wide Support Rod (Silver)
Qty 6 - 18 inch x 18 inch steel Base (Black), 35 pounds with Base Pin
Qty 20 - 166 inch tall x 48 inch wide Banjo Drape (Snow White)
*Drapes are sewn 2 inches shorter than 14 feet tall to avoid dragging on the floor when used at the maximum 14 foot height. When using at a lower height, you can tuck back or pin back any excess fabric.
Fabric has a usable selvedge on each side. Drapes are about 60% light blocking, most often used for conventions and trade shows.
Telescoping Uprights function via Button Stops at every 1 foot increment (9, 10, 11, 12, 13, and 14 feet), and a Locking Clamp is included to allow setting "in between" heights that aren't at an even foot increment (for example: 13 feet 7 inches tall). The shortest height (minimum) that you can set is 8 feet tall, and the tallest height (maximum) is 14 feet.
Drape Care Instructions: Machine wash like colors on cold, using a gentle cycle. If needed, use only a mild liquid detergent applied to the water prior to placing drape in the machine -- never put concentrated detergent directly into contact with the fabric as it may alter the color. Can be machine dried (air only setting), and ironed (cool setting). NEVER EXPOSE THE DRAPE TO TEMPERATURES ABOVE 140F DURING ANY PORTION OF LAUNDERING. Doing so can significantly shrink and/or permanently wrinkle the fabric.
Note: Different browsers and monitors show colors differently. Swatches shown in listing are for reference only. Swatch samples can be mailed upon request. Dye lots may vary on future orders.
8. 14 Ft. High x 4 Ft. Wide Banjo Drape Panel (For Pipe and Drape Displays and Backdrops) - Snow White
Feature
14 feet tall (sewn 2 inches shorter, to a finished height of 166 inches) x 48 inches wide drape with 4 inch pole pocket sewn into the top and bottom.Sewn 2 inches shorter to avoid dragging on the floor when used at a 14 foot height.
100% Polyseter drape is Inherently Flame Retardant and passes NFPA 701 fire code.
Listing is for (1) drape. Hardware parts (pipes and bases) sold separately.
Drape is sewn flat (not pleated) and can be gathered by hand on a drapery rod to achieve a gathered / bunched look. 4 drapes are recommended per 10 foot wide span.
Description
This lighter weight fabric has an open weave pattern with shiny (almost sparkling) specks where the threads are thickest. Commonly used for pipe and drape displays in convention centers.Quantity 1 = 1 drape. The drape is not sewn with pleats; it is sewn flat and can be gathered by hand on a drapery rod using one of the 4 inch pole pockets (sewn on both the top and bottom of the drape). A minimum of 4 drapes are recommended per 10 foot wide span.
Fabric has a usable selvedge on both sides.
Fabric blocks approximately 60% of light. This estimate is approximate for use under normal conditions, and with adequate gathering (bunching). Many factors can affect the opacity, including the amount of lighting, the amount of gathering (bunching), spacing from a wall, and the overall brightness of the lighting in a room. Using the drape near a wall makes it more opaque than if it's used in front of a window with sunlight shining through. In situations with a lot of lighting, you can help make it more opaque by adding an extra drape panel or two. A minimum of 4 drapes for every 10 foot wide span is recommended.
Care Instructions: Machine wash like colors on cold, using a gentle cycle. If needed, use only a mild liquid detergent applied to the water prior to placing drape in the machine -- never put concentrated detergent directly into contact with the fabric as it may alter the color. Can be machine dried (air only setting), and ironed (cool setting). NEVER EXPOSE THE DRAPE TO TEMPERATURES ABOVE 140F DURING ANY PORTION OF LAUNDERING. Doing so can significantly shrink and/or permanently wrinkle the fabric.
Please note: the colors shown in the listing are for reference only and may not be exact as different browsers, monitors, and settings will show colors differently. Free sample swatches are available upon request prior to ordering.
9. Adjustable Pipe and Drape Banjo Backdrop Kit 14 ft. x 20 ft. - Snow White
Feature
Premium quality free standing adjustable 8 to 14 foot tall x 12 to 20 foot wide Pipe and Drape Kit.Includes 3 Uprights, 2 Support Rods, 3 Bases, and 8 Drapes.
Drape is Inherently Flame Retardant and passes NFPA 701 fire code.
Easily create a backdrop up to 14 feet tall and 20 feet wide (connecting together; single span).
Quick set-up in just minutes!
Description
This free standing pipe and drape section comes with all the parts needed to create an adjustable 8 to 14 ft. tall x 12 to 20 ft. wide span (all connecting together):Qty 3 - Adjustable 8-14 foot tall telescoping Upright (Silver), 2 inch diameter with Button Stops & Locking Clamp
Qty 2 - Adjustable 6-10 foot wide Support Rod (Silver)
Qty 3 - 18 inch x 18 inch steel Base (Black), 35 pounds with Base Pin
Qty 8 - 166 inch tall x 48 inch wide Banjo Drape (Snow White)
*Drapes are sewn 2 inches shorter than 14 feet tall to avoid dragging on the floor when used at the maximum 14 foot height. When using at a lower height, you can tuck back or pin back any excess fabric.
Fabric has a usable selvedge on each side. Drapes are about 60% light blocking, most often used for conventions and trade shows.
Telescoping Uprights function via Button Stops at every 1 foot increment (9, 10, 11, 12, 13, and 14 feet), and a Locking Clamp is included to allow setting "in between" heights that aren't at an even foot increment (for example: 13 feet 7 inches tall). The shortest height (minimum) that you can set is 8 feet tall, and the tallest height (maximum) is 14 feet.
Drape Care Instructions: Machine wash like colors on cold, using a gentle cycle. If needed, use only a mild liquid detergent applied to the water prior to placing drape in the machine -- never put concentrated detergent directly into contact with the fabric as it may alter the color. Can be machine dried (air only setting), and ironed (cool setting). NEVER EXPOSE THE DRAPE TO TEMPERATURES ABOVE 140F DURING ANY PORTION OF LAUNDERING. Doing so can significantly shrink and/or permanently wrinkle the fabric.
Note: Different browsers and monitors show colors differently. Swatches shown in listing are for reference only. Swatch samples can be mailed upon request. Dye lots may vary on future orders.
10. Adjustable Pipe and Drape Banjo Backdrop Kit 10 ft. x 10 ft. - Snow White
Feature
Premium quality free standing adjustable 6 to 10 foot tall x 6 to 10 foot wide Pipe and Drape Kit.Includes 2 Uprights, 1 Support Rod, 2 Bases, and 4 Drapes.
Uprights adjust between 6-10 feet tall via a button stop at every 1 foot increment, and a locking clamp for "in between" heights.
Banjo drape is Inherently Flame Retardant and passes NFPA 701 fire code.
Quick set-up in just minutes!
Description
This free standing pipe and drape section comes with all the parts needed to create an adjustable 6-10 ft. tall x 6-10 ft. wide span:Qty 2 - Adjustable 6-10 foot tall telescoping Upright (Silver), 2 inch diameter with Button Stops & Locking Clamp
Qty 1 - Adjustable 6-10 foot wide Support Rod (Silver)
Qty 2 - 18 inch x 18 inch steel Base (Silver), 17 pounds with Base Pin
Qty 4 - 118 inch tall x 48 inch wide Banjo drape (Snow White)
*Drapes are sewn 2 inches shorter than 10 feet tall to avoid dragging on the floor when used at the maximum 10 foot height. When using at a lower height, you can tuck back or pin back any excess fabric.
Telescoping Uprights function via Button Stops at every 1 foot increment (7, 8, 9, and 10 feet), and a Locking Clamp is included to allow setting "in between" heights that aren't at an even foot increment (for example: 9 feet 3 inches tall). The shortest height (minimum) that you can set is 6 feet tall, and the tallest height (maximum) is 10 feet.
Drape Care Instructions: Machine wash like colors on cold, using a gentle cycle. If needed, use only a mild liquid detergent applied to the water prior to placing drape in the machine -- never put concentrated detergent directly into contact with the fabric as it may alter the color. Can be machine dried (air only setting), and ironed (cool setting). NEVER EXPOSE THE DRAPE TO TEMPERATURES ABOVE 140F DURING ANY PORTION OF LAUNDERING. Doing so can significantly shrink and/or permanently wrinkle the fabric.
Note: Different browsers and monitors show colors differently. Swatches shown in listing are for reference only. Swatch samples can be mailed upon request. Dye lots may vary on future orders.
Recent Comments