Best breadboard extension list
We spent many hours on research to finding breadboard extension, reading product features, product specifications for this guide. For those of you who wish to the best breadboard extension, you should not miss this article. breadboard extension coming in a variety of types but also different price range. The following is the top 10 breadboard extension by our suggestions:
1. Kuman RPi GPIO Breakout Expansion Kit for Raspberry Pi, T-Type Expansion Board + 400 Points Tie Points Solderless Breadboard + 40 pin IDE Male - Female - Male Extension Cable + 35pcs Jump Wires K80
Feature
Essential kit specially designed for using the gpio pins of raspberry pi motherboard to plug 3.5inch LCD panel and other components at the same time.T-type expansion board and breadboard makes the experiment more convenient
Comes with a 40 pin IDE male - female - male extension line and 30 pcs Bread board Jump Cables, 1 pcs T-type expansion board , 1 pcs 400 points Points MB102 breadboard
With the GPIO extention board, you can connect all version raspberry of the board to various sensors and electronic components.
Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE, contact us BY Email to get documents
Description
Product description:
Suitable for Raspberry pi 3B ,Raspberry pi 2 Model B 2B,Raspberry pi 1B+, Raspberry pi 1 A A+,Raspberry pi zero W, Raspberry pi zero and 3.5 inch LCD Panel.
1,The SPI mode of the display is extended, so that the fan on the shell can be installed easily, at the same time you can use the extra GPIO.
2, It is easy to connect the GPIOs Products those are not used on the screen.
3, T-type expansion board and breadboard makes the experiment more convenient
4, It solve the problem that we can not use GPIO.
Packing included:
1 pcs T-type expansion board
1 pcs 400 points breadboard
40 pin IDE male - female - male extension line
30 pcs Bread board line
NOTE: Raspberry Pi development board is not included.With the GPIO extention board, you can connect all version raspberry of the board to various sensors and electronic components.
T type GPIO board blue and red will be shipped randomly
2. MakerSpot 6mm 2 Pin Panel PCB Momentary Tactile Tact Push Button Switch Through Hole with Extension Jumper Cable Breadboard Friendly (2 Pack)
Feature
6mm 2pin Through Hole Tactile Switch with Extension Cable x 2 packButtons are 6mm tall
Pre-soldered with 7" (18cm) extension cable
Rated for 50 mA of current
Description
These small buttons are the ones you often see in all kinds of different projects. The buttons on this version are 6mm tall, with the base measuring 6 x 6mm and are pre-soldered with 7" (18cm) extension cable, rated for 50 mA of current. This is for a packet of 2 buttons.
3. Adeept RFID Starter Kit for Raspberry Pi 3, 2 Model B/B+, Stepper Motor, ADXL345, 40-pin GPIO Extension Board, Breadboard, with C and Python Code, Learning Kit with Guidebook(PDF)
Feature
Designed for Raspberry Pi beginners and electronic enthusiasts.A detailed user manual/guidebook(PDF) with 26 lessons and two versions code(Python and C) are provided, it is esay for you to learn Raspberry Pi and C&&Python programming. There is a CD ROM in the product box, all the files were pre-stored in the CD ROM inside.
Quick-responding technical support for free.
Re-designed case, it is very beautiful, and it is a best gift for children
Raspberry Pi is NOT included.
Description
This is an RFID learning kit for Raspberry Pi. An RC522 RFID module, some common electronic components and sensors are included.The kit contains more than 180 components and electronic modules,these components can be divided into about 30 species.We have carefully prepared a guidebook(more than 100 pages guide book of PDF)and supporting experimental code routine for you to learn. The guide book includes 26 experiments,and the code is divided into two versions(C and Python).Through the learning, you will get a better understanding of RFID and Raspberry Pi, and be able to make fascinating works based on Raspberry Pi.If you want to learn the basics of electronics and Linux programming, this kit is a wonderful choice for you.In the process of learning this kit, you will get perfect technical support. By learning this kit, you will be fully aware of the wonderful world of electronics and the fun of DIY.Lessons:
About the Raspberry Pi
Raspberry Pi Pin Numbering Introduction
Raspberry Pi GPIO Library Introduction
How to use the wiringPi and the RPi.GPIO
Lesson 1 Blinking LED
Lesson 2 Active Buzzer
Lesson 3 Passive Buzzer
Lesson 4 Tilt Switch
Lesson 5 Controlling an LED with a button
Lesson 6 Relay
Lesson 7 LED Flowing Lights
Lesson 8 Breathing LED
Lesson 9 Controlling a RGB LED with PWM
Lesson 10 7-segment display
Lesson 11 4-digit 7-segment display
Lesson 12 LCD1602
Lesson 13 Matrix Keyboard
Lesson 14 Measure the distance
Lesson 15 Temperature & Humidity Sensor-DHT-11
Lesson 16 Dot-matrix display
Lesson 17 Photoresistor
Lesson 18 Thermistor
Lesson 19 RFID
Lesson 20 LED Bar Graph
Lesson 21 Controlling an LED through LAN
Lesson 22 DC motor
Lesson 23 How to control a stepper motor
Lesson 24 How to use the acceleration sensor ADXL345
Lesson 25 PS2 Joystick
Lesson 26 A simple access control system
4. Quimat QK74 Complete Starter Kit for Raspberry Pi, Ultimate Project Kit with Prototype Breadboard, GPIO Extension Board, Ribbon Cable, On/Off Switch, Protective Case, Heat sinks and HDMI Cable
Feature
Size: 55mm Metric Hex Lock Nut Socket, 1/2 DriveUse on Toyota, RN, Land Cruiser, FJ Cruiser models with front adjusting nuts.
Durable build quality
Specially designed and makes wheel bearing locknuts easy to remove or install
Socket is designed for use with 1/2 inch square-drive manual tools only; Impact tool use voids socket warranty
Lifetime warranty
Description
Locknut Sockets5. iUniker GPIO Breakout Kit, RPi GPIO Breakout Expansion Kit for Raspberry Pi - Assembled T Type Pi Breakout + Ribbon Cable + 400 Points Solderless Breadboard
Feature
ALL NEW BLACK VERSION, Cooler than Others.T-type expansion board and breadboard makes the experiment more convenient
With the GPIO extention Cable, you can connect all version raspberry of the board to various sensors and electronic components.
High quality Solderless Breadboard: 400 tie-points
Designed for Raspberry Pi 3B+/3B/2B/1B+
Description
Suitable for Raspberry pi 3B+, 3B ,Raspberry Pi 2 Model B 2B,Raspberry pi 1B+, Raspberry pi 1 A A+- It is easy to connect the GPIOs Products
- T-type expansion board and breadboard makes the experiment more convenient.
- It solve the problem that we can not use GPIO.
Packing included:
1x T-type expansion board
1x 400 points breadboard
1x 40 Pin GPIO Extension Cable
NOTE: Raspberry Pi development board is not included.
6. SunFounder GPIO Extension Board T Shape for Raspberry Pi 3, 2 Model B & RPi 1 Model B+, with 40 Pins Ribbon Cable
Feature
A T-shape Extension Board which extends the pins of Raspberry Pi and can be directly plugged into a breadboard.Separate UART pins, convenient for logging into the Raspberry Pi by serial port.
All pins are labeled with BCM, those on the right sequenced by wiringPi.
The power and GND pins underneath can be plugged into the power (+) and ground (-) rails on the breadboard.
With a power indicator LED, and well-designed socket in case of inverse cable connection.
Description
IntroductionThis T-shape extension board, as the name suggests, is to extend the GPIOs of a Raspberry Pi. Underneath the power and GND pins can be plugged into the + and - rails on a breadboard, making it easy and neat to connect. A filter capacitor is added between the power and GND for steady voltage output. With this T_Extension Board, you can make your experiments more conveniently and easily!
Package included:
1 x T-Extension Board with 40-pin Ribbon Cable
7. Weathered Extension Farm Table with Breadboard Ends
Description
Custom weathered farmhouse dining table. Various sizes available priced accordingly (pictured - 42" x 72" x 30"/ Extends to 114"). If you have specific dimensions or finish ideas (stain/paint) please feel free to include those details in your order. Feel free to offer your own designs to get a quote. For more custom furniture - website: www.customtimberhf.com . Instagram: @customtimber Shipping rates vary based on customer location, therefore I'm unable to set a price for shipping. If you would provide me with the zipcode of where you would like your order delivered to, I will provide you with a quote. Thanks!8. Smraza Ultimate Starter Kit for Raspberry Pi 3 B+, 3 Model B Includes Clear Case,16GB Micro SD Card,2.5A Power Supply,Breadboard,GPIO Breakout Board,Ribbon Cable and HDMI Cable
Feature
Easy set-up: Clear protective case with two-piece clear injection-molded ABS enclosure, it fully compatible with Raspberry pi 3 2 model B. Case allow insert/remove sd card, Breakout cable and power cable RPi access.(Not include the Raspberry pi board)Common-use components for Raspberry pi: With GPIO Extension Board, solderless breadboard , GPIO Cable, LED lights, buttons and resistors to help you build simple electronic circuit connections. 3pcs Aluminum Heatsinks improve the CPU/LAN/RAM chips ventilation.
16GB Micro SD Card(At least $9.99 on amazon) for RPi 3 b+ 2 model b: 16GB sd card with high speed SDHC class 10 UHS-1 which adapts to Raspberry Pi NOOBS operating system.
39 inch HDMI Cable : Meets HDMI 1.4 specification, can connect Raspberry Pi, Blu-ray players, computers and other HDMI-enabled devices to TVs and displays.
Enough power (2.5A) + 59 inch Micro USB cord with on/off switch for pi 3: Power Adapter meets pi 3b 2b power expectation and avoid the pi reboot by insufficient power supply.
Description
This starter kit for you to start Raspberry pi easy builds, it Includes everything you need to get started interacting with YOUR Raspberry Pi 3,2.Smraza Starter Kit offers a wider variety of components Such as a Clear case, 5V/2.5A power supply,GPIO Breakout board,HDMI cable,Jumper Wires,Breadboard and LEDs etc to start your learning and creativity.
Package Included:
1) Clear case x1
2) Aluminium Heat Sinks x2
3) 16G SD Card x1
4) Card Reader x1
5) 5V/2.5APower Supply x1
6) USB Cable with on/off Switch x1
7) HDMI Cable x1
8) 400 tie-points Breadboard x1
9) 40 pin GPIO Cable x1
10) 40 pin GPIO Extension Board x1
11) Male to Female Jumper Wires x10
12) 35*Jumper Wire x1
13) 12mm Buttons(large) x5
14) Red LEDs x5
15) Yellow LED x5
16) Resistor (330R) x20
17) Resistor (10K) x20
About Smraza:
We are a leading manufacturer of electronic components for Arduino and Raspberry Pi. We have a professional engineering team dedicated to providing tutorials and support to help you get started.
If you have any technical questions, please feel free to contact our support staff via Amazon communication tool.
9. 5x TRRS 3.5mm Jack Breakout Board Headset Stereo Socket Extension Module
Feature
TRRS 3.5MM JackDescription
TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for Tip, Ring, Ring, Sleeve, which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone (like hands-free headsets) or to carry a video signal (like in some MP3/MP4 players).
Description:
Mini design, portable and easy to use
This breakout board makes it easy to add a TRRS jack to your prototype or project by breaking out each conductor to a standard 0.1" spaced header.
Lead to the left channel, right channel, ground wire, and the lines of the plug
Size: Approx 1.7*1.2cm / 0.6*0.5 inch
Material: Plastic + metal
Package Includes:
5 x Breakout board
5x Pins Header
10. Table Pins Wood alignment pin Leaf Extension Wooden Top Furniture connector Extension slides Align lock fasteners Crafts and Woodworking Breadboard End 30-Pack (30)
Feature
Hardwood Dining Coffee table tops can be align and hold table leaves in placeEasy to install by using a slightly smaller bit than the diameter of the table pin
Great for woodworking projects and professionals or Do it yourself woodworking project
Mortise and tenon wood work project wood fastener alignment leaf locks pins
You can modify the wooden dowels / pins easily by sanding unlike brass pins
Description
AmePro SupplySolid Wood Pins. This 30 piece pack is constructed from unfinished hardwood. 1-1/4 inch in length and 3/8 inch in diameter.
With this wooden pins you can align the table leaves for a strong assembly. Then, the pins hold the table leaves in position for the perfect extension table.
These table top alignment pins comes with a value pack of 30 Pieces.
Recent Comments