Best rail depth adapter kit for 2022

Finding your suitable rail depth adapter kit is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best rail depth adapter kit including detail information and customer reviews. Let’s find out which is your favorite one.

Product	Features	Editor's score	Go to site
	Rail Depth Adapter Kit for Server Racks - 4 in. (10 cm) Rack Extender - 1U		Go to amazon.com
	2RU Recessed Rack Adapter,		Go to amazon.com
	NavePoint Full Depth Rack Mount Shelf Rail for Dell IBM HP Compaq 2-Pack		Go to amazon.com
	10RU Recessed Rack Adapter,		Go to amazon.com
	3RU Recessed Rack Adapter,		Go to amazon.com
	5RU Recessed Rack Adapter,		Go to amazon.com
	NavePoint Universal 1U Rack Mount 4-Post Shelf Rail Dell Compaq IBM HP APC - 33.5" deep		Go to amazon.com
	34-199902 2U Rack Extender 4"		Go to amazon.com
	RackSolutions 1U Bracket, 2-Bends, 0.59" Wide		Go to amazon.com
	Rack Solutions Mounting Rail for Server [122-2580] -		Go to amazon.com

Related posts:

1. Rail Depth Adapter Kit for Server Racks - 4 in. (10 cm) Rack Extender - 1U

Feature

Add flexibility to your rack by expanding or reducing the equipment mounting depth by 4 inches
Work with server racks and cabinents and rack-mountable equipment
Rail depth adapter / Rack extender / Rack extender brackets / Server rack depth extender / Server rack depth adapter / 1U rack depth brackets
Save cost by installing equipment with different mounting depths in the same rack

Description

This depth adapter kit lets you extend or reduce the mounting depth of one rack unit (1U) in your server rack by up to four inches. If you're using the adapter kit in a two post installation the extenders can support a total weight load of 10 lbs. (4.5 kg). If you're using the adapter kit in a four post installation, the extenders can support a total weight load of 90 lbs. (40 kg), you can even use two sets of extender brackets in a four post installation and achieve the same weight capacity performance.

This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.

Mount equipment that's too long, or too short

You can use this adapter kit to mount equipment in your server rack that's up to four inches longer or shorter than the rack's mounting depth.

Save money by mounting all of your equipment in one rack

With this adapter kit, you can customize your server rack to support different mounting depths, so you have the freedom to mount equipment of different depths in the same rack. Its a cost-saving, hassle-free way to consolidate your equipment into a single rack, so you have one server rack to manage instead of two.

Cable management flexibility

The depth adapter kit can also be used to help manage cables. You can mount equipment 4 in from the rails, to prevent cables from protruding from the rack. You can use the rail depth adapter to mount equipment that has high density cabling, such as patch panels, PDUs or network switches, to minimize the effects of cable strain and provide easier access to the cables.

The RDA1U is backed by a 2-year warranty and free lifetime technical support.

2. 2RU Recessed Rack Adapter,

Description

2RU Recessed Rack AdapterRecessed rack adapters are used to mount computer and networking equipment slightly deeper in an equipment rack, allowing the ability to close rack doors when protrudingwiringorequipment would have otherwiseprevented doing so.Finish: Black powder coatRecesses 3 from face of rackFeatures a recessed bend so the mounting surface to prevent equipment and wiring from interfering with rack doors closing.Includes (8) #12-24 rack mount screws and pair of adapters2RU (Rack Unit) height (3.5")

3. NavePoint Full Depth Rack Mount Shelf Rail for Dell IBM HP Compaq 2-Pack

Feature

These rack mount adjustable rails kits allow you to support devices on your 19", 23" or 30" rack without having to mount them directly.
Full, nested floor allows weight to be distributed in front and back.
Depth can be adjusted up to 33.25" deep.
Support up to 110 lbs when properly installed to a 4 post rack or cabinet.
Both 10-32 and 12-24 mounting screw kits are included allowing mount on either thread pattern.

Description

This listing is for 2 sets of rails. These rails are popular for use with Dell, IBM, APC, Compaq and HP cabinets/racks. They will fit standard 19", 23" and 30" four post racks, and both depth and width can be adjusted. The full, nested floor allows for weight to be distributed in both the front and back of the shelf. The rails are made from 14 gauge cold rolled steel so they can support at least 110 pounds and are finished with a satin black coating. They occupy 1 RU of rack space. Both 10-32 and 12-24 mounting screw kits are included allowing mount on either thread pattern.

4. 10RU Recessed Rack Adapter,

Description

10RU Recessed Rack AdapterRecessed rack adapters are used to mount computer and networking equipment slightly deeper in an equipment rack, allowing the ability to close rack doors when protrudingwiringorequipment would have otherwiseprevented doing so.Finish: Black powder coatRecesses 3 from face of rackFeatures a recessed bend so the mounting surface to prevent equipment and wiring from interfering with rack doors closing.Includes (30) #12-24 rack mount screws and pair of adapters10RU (Rack Unit) height (17.5")

5. 3RU Recessed Rack Adapter,

Description

3RU Recessed Rack AdapterRecessed rack adapters are used to mount computer and networking equipment slightly deeper in an equipment rack, allowing the ability to close rack doors when protrudingwiringorequipment would have otherwiseprevented doing so.Finish: Black powder coatRecesses 3 from face of rackFeatures a recessed bend so the mounting surface to prevent equipment and wiring from interfering with rack doors closing.Includes (12) #12-24 rack mount screws and pair of adapters3RU (Rack Unit) height (5.25")

6. 5RU Recessed Rack Adapter,

Description

5RU Recessed Rack AdapterRecessed rack adapters are used to mount computer and networking equipment slightly deeper in an equipment rack, allowing the ability to close rack doors when protrudingwiringorequipment would have otherwiseprevented doing so.Finish: Black powder coatRecesses 3 from face of rackFeatures a recessed bend so the mounting surface to prevent equipment and wiring from interfering with rack doors closing.Includes (25) #12-24 rack mount screws and pair of adapters5RU (Rack Unit) height (8.75")

7. NavePoint Universal 1U Rack Mount 4-Post Shelf Rail Dell Compaq IBM HP APC - 33.5" deep

Feature

These rails kits allow you to support devices on your rack withough having to mount them directly.
Can be mounted on any rack or cabint including 19", 23", 30".
Depth can be adjusted up to 33.25" deep.
Support up to 110 lbs when installed to a 4 post rack or cabinet.
Both 10-32 and 12-24 mounting screw kits are included allowing mount on either thread pattern.

Description

These rails are popular for use with Dell, IBM, APC, Compaq and HP cabinets/racks. They will fit standard 19", 23" and 30" four post racks, and both depth and width can be adjusted. The rails are made from 14 gauge cold rolled steel so they can support at least 110 pounds and are finished with a satin black coating. They occupy 1 RU of rack space. Both 10-32 and 12-24 mounting screw kits are included allowing mount on either thread pattern.

8. 34-199902 2U Rack Extender 4"

Feature

Material: 16 Gauge CSR Steel
Finish: Satin Black
Rack spaces: 2U
Warranty: Lifetime Warranty
Dimensions 3.5" height

Description

4" depth. Tapped 10-32. Can be front mounted to extend cabinet reach. Mount behind rails to shorten the depth. Sold in pairs.

9. RackSolutions 1U Bracket, 2-Bends, 0.59" Wide

Feature

Used for mounting Tool-less Rails
Converts round holes to square holes
Dell, HP, IBM compatible
Brackets are sold as singles
Designed and made in Texas with pride by RackSolutions.

Description

These RackSolutions adapter brackets can provide a solution to the common problems associated with installing rackmount servers in a variety of server racks. Used in conjunction they can allow for considerable adjustment in the installation depth of the server rack. If the server rack is too deep or too shallow, these adapters will solve the problem. If your server rack has round holes and your slide rails require square holes, these brackets will convert round holes to square holes. Requires 3/8" Screws- Hardware not included

10. Rack Solutions Mounting Rail for Server [122-2580] -

Description

Main Features

• Manufacturer/Supplier: Innovation First, Inc
• Manufacturer Part Number: 122-2580
• Manufacturer Website Address:
• Brand Name: Rack Solutions
• Product Name: Slide Rails for Dell PowerEdge R720
• Marketing Information: The Dell PE R720 rail kit is a replacement for the Dell rail kit that is provided with the R720 server. The R720 rail kit is compatible with 4Post and 2Post server racks. This rail kit is not a ball-bearing rail kit.
• Product Type: Mounting Rail
• Device Supported: Server
• Color: Zinc Plated
• Depth: 3.0
• Package Contents:
  Slide Rails for Dell PowerEdge R720 , Mounting Hardware
• Compatibility: Dell PowerEdge Servers:
  
  R720 , R520
• Assembly Required: Yes

Conclusion

By our suggestions above, we hope that you can found the best rail depth adapter kit for you. Please don't forget to share your experience by comment in this post. Thank you!