Best relay raspberry list

We spent many hours on research to finding relay raspberry, reading product features, product specifications for this guide. For those of you who wish to the best relay raspberry, you should not miss this article. relay raspberry coming in a variety of types but also different price range. The following is the top 10 relay raspberry by our suggestions:

Product	Features	Editor's score	Go to site
	SunFounder 2 Channel DC 5V Relay Module with Optocoupler Low Level Trigger Expansion Board for Arduino UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi		Go to amazon.com
	JBtek 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM		Go to amazon.com
	SunFounder Relay Module for Arduino and Raspberry Pi 5V DC Trigger by HIGHLO (HIGH Trigger)		Go to amazon.com
	JBtek 8 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM		Go to amazon.com
	McIgIcM 3pcs 2 Channel DC 5V Relay Module for Arduino UNO R3 DSP ARM PIC AVR STM32 Raspberry Pi with Optocoupler Low Level Trigger Expansion Board		Go to amazon.com
	Electronics-Salon RPi Power Relay Board Expansion Module, for Raspberry Pi A+ B+ 2B 3B.		Go to amazon.com
	LANDZO 8 Channel 5V DC Relay Module Expansion Board for Arduino Raspberry Pi DSP AVR PIC ARM		Go to amazon.com
	kuman 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM K49		Go to amazon.com
	KEYESTUDIO 5V DCAC 4-Channel Relay Shield Module Expansion Board for Raspberry Pi A+/B+/Pi 2 Model B/Pi 3 Model B		Go to amazon.com
	sb components PiRelay EXPANSION BOARD FOR RASPBERRY PI Raspberry Pi A+/B+/2B/3B/3B+ Loads up to 250VAC/5A,30VDC/5A by		Go to amazon.com

Related posts:

1. SunFounder 2 Channel DC 5V Relay Module with Optocoupler Low Level Trigger Expansion Board for Arduino UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi

Feature

5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
Equiped with high-current relay, AC250V 10A ; DC30V 10A
Standard interface that can be controlled directly by microcontroller (Arduino ,Raspberry Pi, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
Indication LED's for Relay output status
Size: 50.5mm(L) x 38.5mm(W) x 18.5mm(H)(1.99inch x 1.54inch x 0.73inch)

Description

Introduction

Sunfounder 5V 2-Channel Relay Module
Be able to control various appliances, and other equipments with large current.
A relay can be used to control high voltages with a low voltage by connecting it to an MCU.
The 2 relays on the module are independent of each other, once a relay is triggered by the low level,the corresponding LED lights will be lit and accompanied by a crisp sound.
It can be controlled directly by Microcontroller(Arduino , Raspberry Pi, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic).

More details can be found in:
https://www.sunfounder.com/wiki/index.php?title=2_Channel_5V_Relay_Module

Package include:
* 1 x 2 Channel Relay Module

2. JBtek 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM

Feature

Equiped with high-current relay, AC250V 10A ; DC30V 10A
5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current
Be able to control various appliances, and other equipments with large current
ApplicationSupports all MCU control, The industrial field, PLC control, Smart home control
Indication LED's for Relay output status

Description

5V Relay Module 4-ChannelThis is a 5V 4-Channel Relay interface board. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)

3. SunFounder Relay Module for Arduino and Raspberry Pi 5V DC Trigger by HIGHLO (HIGH Trigger)

Feature

Relays are suitable for driving high power electronic devices such as lights, electric fan and air condition. This relay module can be used to control high voltages with a low voltage by connecting to an MCU
Controls DC or AC signals - 220V AC load
Working voltage: 5v; PCB size: 2.0 x 4.3 cm
With power indicator and signal output indicator
Working principle: when a high level is given to SIG, the PNP transistor is energized, coil of the relay electrified, normally open contact closed, and the indicator LED lights up; when a low level is given, PNP will be de-energized, the original state is restored - the normally closed contact closed, and the indicator LED goes out then. For more info, please refer to http://wiki.sunfounder.cc/index.php?title=Relay(LOW)_for_Arduino

Description

Application
The relay module can be applied in an automatic control circuit, used as a module for MCU development boards, or as household appliances control.

Component List
-1 * Relay Module
-1 * 3-Pin anti-reverse jumper wire

4. JBtek 8 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM

Feature

5V 8-Channel Relay interface board, and each one needs 15-20mA Driver Current
Equiped with high-current relay, AC250V 10A ; DC30V 10A
Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
Indication LED's for Relay output status

Description

JBtek DC 5V 8 Channel Relay interface board. Use it to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino , Raspberry Pi, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).

5. McIgIcM 3pcs 2 Channel DC 5V Relay Module for Arduino UNO R3 DSP ARM PIC AVR STM32 Raspberry Pi with Optocoupler Low Level Trigger Expansion Board

Feature

5V 2-Channel Module Relay Board, Driver Current:15-20mA each
Indication LED's for Relay output status
IN: can be low level control relay
Equiped with high-current relay, AC250V 10A ; DC30V 10A
Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)

Description

Specific Parameters:
The module Operating voltage 5V;
Using SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA;
The module uses genuine quality relay, normally open interfaces Maximum load: AC 250V/10A, DC 30V/10A;
Fault-tolerant design, even if the control line is broken, the relay will not operate;
The module can be high or low by a jumper setting trigger;
The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient;

Module size: 50mm*40mm*17mm (L*W*H)

Package:3pcs 2channel relay module arduino UNO R3 board

6. Electronics-Salon RPi Power Relay Board Expansion Module, for Raspberry Pi A+ B+ 2B 3B.

Feature

Supports Raspberry Pi A+ / B+ / 2B / 3B, the RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent.
High quality Panasonic JS1-5V-F power relays, loads up to 10Amp/250VAC, 5Amp 30VDC.
One LED for power and three LEDs for relays status indicating. Darlington transistors circuit driving relay, improve the reliability of action. Relay control jumper, allows to control the relays by custom pins other than the default pins
Terminal blocks: pitch - 5.0mm/0.197", wire size 26~12 AWG / 2.5mm square, stripping length 7mm/0.28", Metric M2.5 slotted screw. 2 x 20 pins expansion pin header, height 10mm/0.39"
Package included: 1x RPi Relay Board, 4x M2.5 14mm brass standoffs, 8x M2.5x4mm metal screws.

Description

Supports Raspberry Pi A+ / B+ / 2B / 3B, the RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent.
High quality Panasonic JS1-5V-F power relays, loads up to 10Amp/250VAC, 5Amp 30VDC.
One LED for power and three LEDs for relays status indicating. Darlington transistors circuit driving relay, improve the reliability of action. Relay control jumper, allows to control the relays by custom pins other than the default pins
Terminal blocks: pitch - 5.0mm/0.197", wire size 26~12 AWG / 2.5mm square, stripping length 7mm/0.28", Metric M2.5 slotted screw. 2 x 20 pins expansion pin header, height 10mm/0.39"
Package included: 1x RPi Relay Board, 4x M2.5 14mm brass standoffs, 8x M2.5x4mm metal screws.

Note: the item not include Raspberry Pi board.

7. LANDZO 8 Channel 5V DC Relay Module Expansion Board for Arduino Raspberry Pi DSP AVR PIC ARM

Feature

5V 8-Channel Relay interface board equiped with high-current relay, AC250V 10A ; DC30V 10A
Standard interface that can be controlled directly by all microcontroller (Arduino , Raspberry pi ,51, AVR, ARM, )
ApplicationSupports all MCU control, The industrial field, PLC control, Smart home control
This module complies with international safety standards, with isolation slot in the control area and load area;

Description

Product introduction
Can be used as microcontroller development board module can be used as home appliance control
5 V-12V to TTL control signal
The control signal DC or AC, 220V AC load can be controlled
There is a normally open and one normally closed contact
A power indicator light
A control indicator, pull off, disconnect does not shine
Transistor drive to increase the relay coil control pins high impedance
The control pin has a pull-down circuit to prevent malfunction relay vacant

The module size: 138m * 56mm * 18.5mm (length * width * height), with four fixed bolt holes, holes 3.1mm, spacing 131mm * 49.5mm,net weight: 120g

8. kuman 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM K49

Feature

Be able to control various appliances, and other equipment with large current
Equiped with high-current relay, AC250V 10A ; DC30V 10A
5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current
Application:Supports all MCU control, The industrial field, PLC control, Smart home control
Indication LED's for Relay output status

Description

Module Features:
The module comply with international safety standard.it designed on control and load area independently
The PCB board designed with double FR4 substrate, more safe and stable.
The module could directly control various devices and load.
Can be full open or Fully closed.
Point to point control and Cycle control.
4 relay outputs, each of 5.08-3P terminal (output is normally open and normally closed)
Power supply: 5V
Module size: L55*W18.5*H75 mm Net weight: 61g
4 screw fixing hole: Hole diameter: 3.1mm Spacing: 68*48mm

Indicator Description:
RED is power indicator light, Another four respectively four relays, When the corresponding relay is open,Glow green

Packing including:
1x4-way Relay Switch Module

9. KEYESTUDIO 5V DCAC 4-Channel Relay Shield Module Expansion Board for Raspberry Pi A+/B+/Pi 2 Model B/Pi 3 Model B

Feature

This shield uses SONGLE relay, providing 4-channel input and output. And works with Raspberry Pi A+/B+/Pi 2 Model B/Pi 3 Model B.
All the channels can control up to 24V DC or 250V AC on 10 A.
providing installation package, source code and quick start guide PDF
With functional testing, voltage and current testing, all our boards are fully qualified before selling.
Adopting environmental-friendly raw materials, passed the United States FCC certification and the EU CE certification

Description

Introduction
Keyestudio RPI 4-Relay Shield works with Raspberry Pi A+/B+/Pi 2 Model B/Pi 3 Model B. This shield uses SONGLE relay, providing 4-channel input and output. The relays are isolated in the PCB.
All the channels can control up to 24V DC or 250V AC on 10 A. It allows you to control high power components like lights and motors via Raspberry Pi 3.
Just plug it directly into your pi with 5 V. You will find a LED indicates the status of the relays that an indicator to check working state easily.
It can be applied to high voltage filed like home automation.With opto-asolator to avoid disturb of high voltage.

We will provide installation package, source code and quick start guide PDF on keyestudio wiki page.
http://wiki.keyestudio.com/index.php/KS0212_keyestudio_RPI_4-channel_Relay_Shield

Specification
Control Signal: TTL Level
Rated Load
10A 250VAC
10A 125VAC
10A 30VDC
10A 28VDC
Rated Current: 10A(NO) 5A(NC)
Max Switching Voltage: 250VAC 30VDC
Contact Time: under 10ms

Application:
Smart home control
PLC control

Shipping list:
4-channel 5V Relay*1pcs
M2.5 nut *4pcs
M2.5*10 copper pillar*4pcs
M2.5*20MM round head screw*4pcs

10. sb components PiRelay EXPANSION BOARD FOR RASPBERRY PI Raspberry Pi A+/B+/2B/3B/3B+ Loads up to 250VAC/5A,30VDC/5A by

Feature

Supports Raspberry Pi 3,2,A+/B+, Zero, Zero W 4 Relay control more High-quality
Quality relays loads up to 240VAC/7A, 125VDC/10A Onboard LEDs for indicating relays status
Relay control jumper, allows to control the relays by custom pins other than the default pins Comes with development resources, including examples in python
Control through PiRelay app on Andriod. best used with PiTalk

Description

1. Raspberry Pi GPIO interface:for connecting Raspberry Pi
2. Relay screw terminal:for connecting target devices
3. 4 Relays
4. Relay indicator

• LED on: relay NC is opened, NO is closed
• LED off: relay NC is closed, NO is opened
• Power indicator
• Relay control jumper

Conclusion

By our suggestions above, we hope that you can found the best relay raspberry for you. Please don't forget to share your experience by comment in this post. Thank you!