Best sawstop accessories

If you looking for sawstop accessories then you are right place. We are searching for the best sawstop accessories on the market and analyze these products to provide you the best choice.

Product	Features	Editor's score	Go to site
	SAWSTOP Cast Iron Wing Assem		Go to amazon.com
	SawStop TSBC-10R2 Table Saw Brake Cartridge for 10-Inch Blades		Go to amazon.com
	SawStop TSA-ODC Over-Arm Dust Collection Assembly		Go to amazon.com
	SawStop OFT30-CNS-000 30-Inch Out-feed Table Assembly		Go to amazon.com
	SawStop TSG-DC Dust Collection Blade Guard		Go to amazon.com
	SawStop TSI-DLD Dado Lock Down Insert		Go to amazon.com
	SawStop TSI-SLD Standard Lock Down Insert		Go to amazon.com
	Rousseau 2790-RXT Router Extension Table for Models 2790 and 2775 Table Saw Stands		Go to amazon.com
	SawStop TSA-SA48 Sliding Crosscut Table Attachment		Go to amazon.com
	GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG		Go to amazon.com

Related posts:

1. SAWSTOP Cast Iron Wing Assem

Feature

Includes Factory Warranty
Includes Full Warranty

Description

Includes (2) 12 in. Cast Iron Extension Wings for CNS175 Contractor Saw - CNS-07-017

2. SawStop TSBC-10R2 Table Saw Brake Cartridge for 10-Inch Blades

Feature

Compatible with SawStop saws that currently receive transparent BLUE cartridges.
Compatible with all standard 10-inch blades
Compatible with all woods and other non-conductive materials
Designed for quick replacement when activated
Revolutionary SawStop protection

Description

The revolutionary SawStop protection starts here! This is the Standard SawStop brake cartridge for 10" saw blades. It fits all models of SawStop table saws (except for older models). Current SawStop models use cartridges with blue tinted plastic cases and 9-pin connectors. If you have an older model with a clear case and a 15-pin connector, you will need a different cartridge; please call SawStop for details.

3. SawStop TSA-ODC Over-Arm Dust Collection Assembly

Feature

Compatible with the 36-inch and 52-inch SawStop Contractor Saws.
Fits all SawStop T-Glide rail systems
Requires Sawstop Dust Collection Blade Guard.
Custom Y-Port unites above and below-table dust collection into one 4 port. (Requires Contractor Saw Dust Collection Panel).
Easy and quick installation.

Description

The Overarm Dust Collection Assembly removes dust up and out of the way. This unit is compatible with all SawStop Cast Iron saws (Jobsite Saw not included). Fits all SawStop T-Glide rail systems (not 30" CNS rail kit). Connects directly to SawStops Dust Collection Blade Guard (TSG-DC required). Custom Y-Port unites above and below-table dust collection into one 4 port.

4. SawStop OFT30-CNS-000 30-Inch Out-feed Table Assembly

Feature

30 of additional out-feed space
Adjustable feet for a level work surface
Designed specifically for use with the T-Glide Professional Series Fence System
Sturdy black powder-coated legs
Outfeed table not compatible with mobile base or job site cart

Description

Specifically designed for the CNS Contractor Saw, the outfeed table provides 30" of additional outfeed support. It is constructed of smooth 3/4" polyurethane coated MDF with machined miter gauge slots and all steel hardware. The unit comes complete with sturdy black powder-coated legs with adjustable feet for a level work surface. Designed specifically for use with the T-Glide Fence Systems, this unit is not compatible with the 30" Aluminum Extrusion Fence System, SawStop mobile base or SawStop jobsite cart.

5. SawStop TSG-DC Dust Collection Blade Guard

Feature

Collect 99% of above-table dust
Independent lateral slides minimize blade exposure
Low profile to allow for cuts as narrow as 3/4 of an inch
Attaches directly to customer's dust collection system
Compatible with SawStop Overarm Dust Collection

Description

Upgrade your SawStop Cast-Iron Saw with above-table dust collection on your 1.75HP Cast-Iron SawStop Table Saw (not compatible with Jobsite Saw). This item comes standard on 3HP and larger SawStop Cast-Iron table saws. Collect the majority of above-table dust with this handy, easy to assemble and mount accessory. The independent lateral slides minimize blade exposure, while the low profile allows for cuts as narrow as 3/4". The dust port attaches directly to customer's dust-collection system and is compatible with SawStop Overarm Dust Collection Assembly.

6. SawStop TSI-DLD Dado Lock Down Insert

Feature

Precision machined
Positioning screws ensure a solid and precise fit in the table
Positive locking latch allows for tool-free operation
Solid phenolic core
Low-friction, wear-resistant melamine surface

Description

This insert can be used with all SawStop Cast-Iron saws (Jobsite Saw not included) using 8" dado blades. Precision machined from a high-quality, ultra strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface. The positioning screws ensure a solid and precise fit in the table. The positive locking latch allows for tool-free operation.

7. SawStop TSI-SLD Standard Lock Down Insert

Feature

Positive locking latch allows for tool-free operation
Positioning screws ensure a solid and precise fit in the table
Pre-formed clearance slots for SawStop blade guard and riving knife
Solid phenolic core
Low-friction, wear-resistant melamine surface

Description

This insert can be used with all SawStop Cast-Iron saws (Jobsite Saw not included) using standard 10" saw blades. Precision machined from a high-quality, ultra strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface. The positioning screws ensure a solid and precise fit in the table. This unit comes with preformed clearance slots for SawStop blade guard and riving knife and has dual metal wear plates for antikickback pawls. The positive locking latch allows for tool-free operation.

8. Rousseau 2790-RXT Router Extension Table for Models 2790 and 2775 Table Saw Stands

Feature

Router Extension Table for Rousseau Models 2790 and 2775 PortaMax Table Saw Stands
Includes Rousseau 3509 Deluxe Router Base Plate
Expands rip capacity to 49"
Attaches quickly, easily and solidly
Includes set screws for leveling with stand to assure accuracy

Description

The Rousseau 2790-RXT Router Extension Table, when installed with a 2790 or 2775 table saw stand, increases the rip capacity to 49", doubles the work surface of the stand and includes the Rousseau 3509 Deluxe Router Base Plate for installation of your router. The 2790-RXT easily attaches to the stand, includes leveling set screws, and is of steel construction with a laminated table top. The 2790-RXT is a multi-function addition to your table saw stand.

9. SawStop TSA-SA48 Sliding Crosscut Table Attachment

Feature

This sliding table is built for versatility. Micro-adjust for detail cuts, and crosscut full sheets with the 55" travel and 48" crosscut capacity.
The fence is at least 15% larger than typical crosscut sliders, spanning 43" and extending past 58".
Adjust the table to fit your needs.
Large flip-stops with scale and magnified lenses help ensure accurate, repeatable cuts every time.

Description

Engineered and finished to fit your SawStop Contractor, Professional Cabinet or Industrial Cabinet Saw, the Sliding Crosscut Table is the finest quality crosscut table available. It delivers repeatable, accurate results with ease and beauty. The oversize fence miter turns at the twist of a single knob, and measures to a full 60 degrees. Easily slide the fence in for blade proximity, and choose a flush or "maximum throw" installation to fit your shop and space requirements.

10. GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG

Feature

3-Directional Force for Unmatched Control of the Work piece
Moving-Blade-Guard Hand Protection
Precise 1/4" Thin Rips
Virtually Eliminates Kickback
Work with Small Stock Safely on the Table Saw, Router Table, Jointer, & Band Saw
3-Directional Force for total control of the workpiece
Work with small stock safely

Description

GRR-RIPPER 3D Pushblock a must-have for any table saw user.

ESSENTIAL PROTECTION

It's essential for superior precision, control and safety on your table saw and other major woodworking machinery. Protect your hands like never before, virtually eliminate kickback with unmatched control, and guide and rip with surgical precision. EXTREME CONTROL

The powerful Green GRR-RIP gives you a commanding hold over the work piece for total control.
GRR-RIPPER has three legs to give you three-directions of control on the Keeper and Off-Cut work piece. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to prevent burning.

UNMATCHED PRECISION

Stabilize your cut with the Built-in Balance Support to square your cut and safely handle the smallest parts of wood when cutting on the table saw or router table. Rip as accurate as a 1/4" standard without readjusting the fence.

FULLY ADJUSTABLE

The Adjustable Center Leg accommodates for a variety of different sizes and widths of material while the grip secures a virtually unlimited variety of woods, solid surfaces, aluminum or even plastic. GRR-RIPPER Handle can be angled and adjusted for your comfort and control.

TOTAL VERSATILITY

GRR-RIPPER comes with a 2-hour Advanced Techniques DVD featuring over 30 unique uses on the table saw, router table, jointer, and band saws.

The powerful hold, extreme accuracy, and versatile adjustability will help you maximize your materials and greatly improve your protection against dangerous accidents.

DONT USE A TABLE SAW WITHOUT IT.

Made in the USA. A true MICROJIG Innovation.
Watch the Action Video and Add to Your Cart Today! 100% Satisfaction Guarantee.
Work Safer. Work Smarter.

Conclusion

All above are our suggestions for sawstop accessories. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using sawstop accessories with us by comment in this post. Thank you!