Expert choice for harness in a bucket
When you want to find harness in a bucket, you may need to consider between many choices. Finding the best harness in a bucket is not an easy task. In this post, we create a very short list about top 10 the best harness in a bucket for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 harness in a bucket:
1. Guardian Fall Protection (Qualcraft) 00815 BOS-T50 Bucket of Safe-Tie with Temper Anchor, 50-Foot Vertical Lifeline Assembly and HUV
Feature
Perfect set for home fall protection gearUniversal harness HUV (01101) with 5 points of adjustment for added comfort.Body Wear Velocity Harness (S - L)
Vertical Lifeline Assembly with Shock Pack, and permanently attached Positioning Device with 18" lanyard extension to keep device within reach
1Heavy Duty Temper Reusable Anchor (00455)
A Guardian Fall Product
Description
FEATURES: 1 Temper Anchor 50' VLA Shock Pack Positioning Device with 18" extension lanyard HUV harness Easy Carry and storageThe Guardian Fall Protection "Bucket of Safe-Tie" offers an all in one approach to fall protection. Each one includes a type of anchor, lanyard and harness conveniently carried in a storage device.2. Guardian Fall Protection 11173 M-L Seraph Construction Harness with Side D-Rings
Feature
Quick adjust torso bucklesSix points of adjustment
Stretchability in the shoulder straps
Hammer loops
Tongue buckle leg straps and side D-rings
Description
Specially designed with six points of adjustment and stretchable shoulder straps; the product includes: shoulder pads, cradle seat, quick adjust torso buckles, padded waist belt, D-ring lanyard keepers (which double as retrieval hoists), impact indicator, hammer loops and tongue buckle leg straps; the model's size is built specifically for individuals whose height ranges from 5' to 6'3" and whose weight ranges from 140 to 250 lbs.3. KwikSafety (Charlotte, NC) THUNDER Safety Harness | ANSI OSHA Full Body Personal Fall Protection 1 Dorsal Ring 2 Side D-Rings & Pass Through Buckle Straps Construction Industrial Tower Roofing Tool
Feature
PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety Full Body Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.REDUCE THE FEAR FACTOR: Our KwikSafety 3D Industrial Full Body Harness has one (1) Dorsal Ring that is located on the back of the Harness and two (2) on the hip for work positioning purposes only. The Dorsal Ring is primary used for fall arrest & also used for restraint & rescue. During a fall, the load is directed through the shoulder straps and around the thighs bringing you to an upright position with a slight lean to the front with some pressure may occur on the lower chest.
SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing straps of our 3D Full Body Harness is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the 'Qualification and Verification Testing of Fall Protection Products'. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.
Description
Our OSHA Approved and ANSI Compliant KwikSafety High Quality Fall Protection Safety Harness is great for any industry and any application. It has 1 -inches wide yellow load bearing straps and black lock stitched webbing to keep you safe and secure while working and if a fall were to occur. Our bright yellow load bearing straps are visible in various weather conditions: direct sunlight, foggy, dusty and dim-light. A Single (1) Dorsal Ring is located on the back of the Full Body Harness and is used as the primary fall arrester attachment. Two D-Rings are located on the hips of the Safety Harness for work positioning uses only. Attachments to the hip rings should be used in pairs for all job types including arborist, utility workers climbing poles, construction workers tying rebar and climbing on form walls. Water repellent safety webbing ergonomically supports back and hips while bearing the weight of the user as well as the weight of tools that may be attached. Here at KwikSafety craftsmanship, care and pride is taken with a critical eye when it comes to our products and to the workers safety. Our KwikSafety 3D Ring Safety Harness meets or exceeds all applicable industry standards including OSHA and ANSI and is Government Approved, DOD Approved, Airport & Port Approved, and RapidGate and TWIC Approved. Great for use at Ports, Airports, Highways, Military Installations and Other Government Facilities. Our KwikSafety Full Body Harness is a One Size Fits Most with a height range of 4'10" to 6'6"; and a weight range of 130 lbs. to 310lbs. If happened to order the wrong size or item, we offer Hassle Free Returns within 30 days if your item was shipped via Amazon FBA!4. KwikSafety (Charlotte, NC) HURRICANE | OSHA ANSI Fall Protection Full Body Safety Harness w/Back Support | Personal Protective Equipment | Dorsal Ring Side D-Rings | Construction Industrial Roofing
Feature
PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety Full Body Harness with Back Support supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.REDUCE THE FEAR FACTOR: Our KwikSafety 3D Industrial Full Body Harness with Back Support has one (1) Dorsal Ring that is located on the back of the Harness and two (2) on the hip for work positioning purposes only. The Dorsal Ring is primary used for fall arrest & also used for restraint & rescue. During a fall, the load is directed through the shoulder straps & around the thighs bringing you to an upright position with a slight frontal with some pressure may occur on the lower chest.
SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing straps of our 3D Full Body Harness with Back Support is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the 'Qualification and Verification Testing of Fall Protection Products'. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.
Description
Our OSHA Approved and ANSI Compliant KwikSafety High Quality Fall Protection Safety Harness is great for any industry and any application. It has 1 -inches wide yellow load bearing straps and black lock stitched webbing to keep you safe and secure while working and if a fall were to occur. Our bright yellow load bearing straps are visible in various weather conditions: direct sunlight, foggy, dusty and dim-light. A Single (1) Dorsal Ring is located on the back of the Full Body Harness and is used as the primary fall arrester attachment. Two D-Rings are located on the hips of the Safety Harness for work positioning uses only. Attachments to the hip rings should be used in pairs for all job types including arborist, utility workers climbing poles, construction workers tying rebar and climbing on form walls. Water repellent safety webbing ergonomically supports back and hips while bearing the weight of the user as well as the weight of tools that may be attached. Here at KwikSafety craftsmanship, care and pride is taken with a critical eye when it comes to our products and to the workers safety. Our KwikSafety 3D Ring Safety Harness with Back Support meets or exceeds all applicable industry standards including OSHA and ANSI and is Government Approved, DOD Approved, Airport & Port Approved, and RapidGate and TWIC Approved. Great for use at Ports, Airports, Highways, Military Installations and Other Government Facilities. Our KwikSafety Full Body Harness is a One Size Fits Most with a height range of 4'10" to 6'6"; and a weight range of 130 lbs. to 310lbs. If happened to order the wrong size or item, we offer Hassle Free Returns within 30 days if your item was shipped via Amazon FBA!5. KSEIBI 421020 Safety Fall Protection Kit, Full Body Harness, with 6" Lanyard Standerd size -up to 42" waist and bag
Feature
Premium quality steel buckles reduce both the carried weight and required energy required for all-day job performance. Three high quality steel D-rings: at back and hips. Five points of adjustment. Notched pass through chest buckles fasten without twistingPolyester webbing with powder coated steel metal fittings
Fully Adjustable Universal Fit for XL and XXL Sizes All in ONE Harness
Multi-Pur pose Harnesses include rear D-rings and are ideal for use as a general harness in a variety of applications.
RESTRAINT ROPE LANYARD 1.0 mtr length, abrasion resistant thimble to protect the loops from being damaged by metallic contact and the Steel Scaffold Hook made from High forged alloy steel material with gate opening 55 mm.
Description
Features:
Full body harness are designed to arrest the most severe free falls
Multi-Pur pose Harnesses include rear D-rings and are ideal for use as a general harness in a variety of applications.
Polyester webbing with powder coated steel metal fittings
RESTRAINT ROPE LANYARD 1.0 mtr lenght, abrasion resistant thimble to protect the loops from being damaged by metallic contact and the Steel Scaffold Hook made from High forged alloy steel material with gate opening 55mm.
Safety Information:
These full body harnesses are designed for use by persons with a combined weight (clothing, tools, etc.) of no more than 320 lbs. Make sure all of the components in your system are rated to a capacity appropriate to your application.
When working with tools, materials, or in high temperature environments, ensure that associated fall protection equipment can withstand high temperatures, or provide protection for those items.
This equipment must be installed and used by persons trained in its correct application and use.
If the full body harness has been subjected to fall arrest or impact forces it must be immediately removed from service and destroyed
From Factory:
KSEIBI full body harness is a body holding device used to protect workers from falls by distributing the force of the fall over a large area of the body, ensuring that the subject of the fall remains suspended in an upright position after the fall has occurred. It is designed to minimize the risk of injuries caused by suspension. Body belts were previously used in fall protection.
6. KwikSafety (Charlotte, NC) TORNADO 1D Fall Protection Full Body Safety Harness | OSHA ANSI Industrial Roofing Tool Personal Protection Equipment | Construction Carpenter Scaffolding Contractor
Feature
PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety Full Body Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all buckles are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.REDUCE THE FEAR FACTOR: Our KwikSafety 1D Industrial Full Body Harness has one (1) Dorsal Ring that is located on the back of the Harness and is the primary fall arrester attachment. It can also be used for restraint and rescue. During a fall, our FBH directs the load through the shoulder straps and around the thighs. If a fall were to occur, the FBH will bring you to an upright position with a slight lean to the front. Some pressure may occur on the lower chest.
SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing straps of our 1D Full Body Harness is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the 'Qualification and Verification Testing of Fall Protection Products'. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.
Description
Our OSHA Approved and ANSI Compliant KwikSafety High Quality Fall Protection Safety Harness is great for any industry and any application. It has 1 -inches wide yellow load bearing straps and black lock stitched webbing to keep you safe and secure while working and if a fall were to occur. Our bright yellow load bearing straps are visible in various weather conditions: direct sunlight, foggy, dusty and dim-light. A Single (1) Dorsal Ring is located on the back of the Full Body Harness and is used as the primary fall arrester attachment. Water repellent safety webbing ergonomically supports back and hips while bearing the weight of the user as well as the weight of tools that may be attached. Here at KwikSafety craftsmanship, care and pride is taken with a critical eye when it comes to our products and to the workers safety. Our KwikSafety Single (1) Dorsal Ring Safety Harness meets or exceeds all applicable industry standards including OSHA and ANSI and is Government Approved, DOD Approved, Airport & Port Approved, and RapidGate and TWIC Approved. Great for use at Ports, Airports, Highways, Military Installations and Other Government Facilities. Our KwikSafety Full Body Harness is a One Size Fits Most with a height range of 4'10" to 6'6"; and a weight range of 130 lbs. to 310lbs. If happened to order the wrong size or item, we offer Hassle Free Returns within 30 days if your item was shipped via Amazon FBA!7. Peakworks Fall Protection V8252356 Compliant Safety Harness and 6 ft. Lanyard Kit, Universal Fit, Polyester Webbing, (2) Snap Hooks, Black & Green
Feature
5 Point adjustable harness in chest, legs and shoulders, 2.4 lbs - Universal Fit6' Shock absorbing lanyard w/ 2 double locking snap hooks, 2.25 lbs
Lanyard; 1-3/4" Tear away web, ANSI Z359.13 compliant and 1" Polyester 9800 lbs. minimum tensile
Harness; 1-3/4" Width Polyester webbing, minimum tensile strength 6000 lbs
Snap hook; zinc plated steel with minimum breaking load of 5000 lbs. & 100% proof loaded to 3600 lbs
Description
Sellstrom 4456-KIT03S has changed its brand to Peakworks V8252356. All parts remain the same but now all meet up-to date ANSI standards ( Harness: ANSI Z359.11-2014 / Lanyard: ANSI Z359.13-2013 ). 5 point adjustable harness w/ 6' shock absorbing lanyard with 2 double locking snap hooks. Peakworks universal harness offers comfort and dependability. Quick connect chest and leg mating buckles along with shoulder adjusters allow for custom fitting. Kit includes 6' shock absorbing lanyard that offers a lightweight, flexible connection between the harness and anchorage point. Lanyard has integrated visible shock pack with tear web design to reduce fall forces on the body in the event of a fall.8. DCM Fall Arest Protection Universal Padded Safety Harness Kit with Shock Absorb Webbing Lanyard
Feature
GREATER COMFORT - DCM harness comfort to the shape of the worker, stretching with every movement, so there is no bunching, binding or kinking. Waist belt and suspension seat lined with breathable perforated foam for maximum comfort when suspendedIMPROVED SAFETY - With unsurpassed comfort, our fall arrest harness offer wider end-user acceptance. More importantly, a comfortable harness is more likely to be worn properly, enhancing compliance and safety on the jobsite. Wide, semi-rigid waistbelt for excellent support
INCREASED DURABILITY - The Teflon high-tech protective finish on the webbing repels water, oil grease and dirt and helps to extend the service live of the harness. These multi-use harnesses are ideal for professionals performing.
ATTACHMENT POINTS - Rear fall arrest dorsal "D" ring and side work positioning "D" rings. The two lateral attachment points transfer the weight evenly around the waistbelt for comfort when leaning back in the belt
USAGE - Our arrest harness is an essential element of a compliant fall protection system suited to most industry applications including warehouse/order picking, painting, roof plumbing, electrical and around the home.
Description
From the manufacturer:
DCM harness provides first-of-its-kind features and benefits offers users of the DCM full body harness a level of comfort, function and durability that has never been experienced with a fall protection harness . . . until now!
With first-of-its-kind features and benefits, our safety harness provides the highest level of safety and the utmost comfort with technologically advanced hardware, soft yet extremely durable anti-absorbent webbing, strategically placed padding, and protective elements that prolong the service life of the harness.
Hybrid Comfort Padding
Lightweight, moisture wicking, and breathable padding wont move or slip, keeping the wearer comfortable at all times.
Moulded Lanyard Keepers
Easy storage of connectors, that pop open to avoid snagging hazards.
300lb Capacity
Large capacity adds to tool carrying options and jobsite flexibility.
Ultra-Soft Edging
Moves with you - doesnt rub or chafe.
Repel Technology Webbing
Water repellent to reduce attraction of mould and dirt - also has up to 5 times more abrasion resistance.
Superior Design
Design is based on a single piece of material in the shape of an X that wraps around the wearer for the ultimate in comfort, security and no-tangle donning.
9. 3 D-Ring Industrial Fall Protection Safety Harness ANSI Compliant Full Body Personal Protection Equipment 5-Point Adjustment Universal 310 lbs
Feature
ERGONOMIC DESIGN FOR PROPER FIT: The combination of "No-loose-ends" shoulders straps, legs straps and chest strap design with Pass-Thru Premium quality alloy steel mating buckles helps reduce both the carried weight and required energy for all-day job performance for users within the capacity range of 130 to 310 pounds (59 to 140 kg). It's General Size great for construction workers, carpenters, painters, roofers, tower climbers, window cleaners etc.SAFETY DESIGN PERFORMANCE:WELKFORDER Full Body Harness WFH001 are used for fall arrest, positioning, travel restraint, suspension and rescue applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. After a fall, our Full Body Harness will support users and post fall at an angle within 30 to vertical. Each of our products is Individually inspected.
HARDWARE COMPONENTS QUALITY ASSURED: WELKFORDER Full Body Harness WFH001 has 3 D-Rings all of Min. Breaking strength 5000lbs/22KN, one dorsal D-ring to match any foreseeable fall arrest working condition, two Waist D-ring for better work position only. Five Adjusting mating buckles with stamping steel material of Min. Breaking strength 4000lbs/18KN on adjusting straps for superior fit provides both premium comfort and safety.
WEBBING & STITCHING QUALITY ASSURED: WELKFORDER Full Body Harness is lightweight with webbing of tangle free to help keep you comfortable. All straps are made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 27KN/6000lbs. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported.
ANSI/ ASSE Z359.11-2014 AND OSHA COMPLIANT: WELKFORDER Full Body Harness is ANSI/ ASSE Z359.11-2014 compliant and in compliance with the requirements of OSHA 1926.502(d) (16) that based on basic fall safety principles have been incorporated into these standards, including hazard survey, hazard elimination and control. The primary intent is to ensure a proactive approach to fall protection.
Description
- WELKFORDER Full Body Harness is fully fulfilled fall protection system by distributing the force of the fall over a large area of the body, ensuring that the subject of the fall remains suspended in an upright position after the fall has occurred.
- High UV resistance webbing & thread are both available as alternative for the harness which would may be exposed in the scorching sunshine for a long time.
- The Full Body Harness is a General Size with a height range of 4'10" to 6'1"; and a weight range of 130 lbs to 310lbs. Compliant by ANSI/ASSE Z359.11-2014
- If the item or style cannot fulfill your satisfaction, we offer Free Returns within 30 days! Besides, we will provide you professional customer service related to all your questions of our products.If you have any questions, please feel free to contact us. We will reply you as soon as possible.
10. Purelife Glass Enema Kit - 1.5 Qt - Patented 100% Non Toxic Glass Enema Bucket with Harness - No Plastic Parts - Gerson Coffee Enema - Wheatgrass Enema - Essential Oil Enemas - On Sale Now!
Feature
Patented 100% Non Toxic Lead Free Glass Enema Bucket -1.5 QT - Graduated Measuring Lines - Holds 6 Cups - Recommended for Coffee Enemas, Wheatgrass Enemas & Essential Oil EnemasAll Glass Parts On Bucket - No plastic parts - Easy To Clean - Dishwasher Safe
5 Ft. Medical Silicone Enema Hose - BPA Free Non Toxic - Can Be Re-Sterilized in Boiling Water
3 " Silicone Enema Nozzle Tip - Comfortable Insert
Harness For Hanging - Free Instruction Guide
Recent Comments