Expert choice for infrared thermometer raspberry pi

When you want to find infrared thermometer raspberry pi, you may need to consider between many choices. Finding the best infrared thermometer raspberry pi is not an easy task. In this post, we create a very short list about top 2 the best infrared thermometer raspberry pi for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 2 infrared thermometer raspberry pi:

Product	Features	Editor's score	Go to site
	IZOKEE IZOKEE 3PCS DHT11 Digital Temperature and Humidity Sensor Module for Arduino DIY Raspberry Pi (3x DHT11)		Go to amazon.com
	ACROBOTIC MLX90614 Infrared Thermometer IR Temperature Detector Sensor Breakout Board for Arduino Raspberry Pi ESP8266 GY-906 MLX90614ESF		Go to amazon.com

Related posts:

1. IZOKEE IZOKEE 3PCS DHT11 Digital Temperature and Humidity Sensor Module for Arduino DIY Raspberry Pi (3x DHT11)

Feature

DHT11 digital temperature and humidity sensor is a calibrated digital signal output temperature and humidity combined sensor.
Accuracy: Humidity +&-5% RH, temperature +&-2 Celsius degree. Humidity measuring range: 20% - 90% RH, Temperature 0 to 50 Celsius degree.
The single-wire wiring scheme makes it easy to be integrated to other applications. The simple communication protocol greatly reduces the required programming effort.
The example project for Temperature & Humidity Sensor working with Arduino Uno R3: http://osoyoo.com/?p=518 (Please add a 4.7K or 10K resistance).
The example project for Temperature & Humidity Sensor working with Raspberry Pi: http://osoyoo.com/?p=858

Description

"Just Choose IZOKEE: Your expert for Micro-Electronics! One-Stop-Shopping with Various Electronic Modules and Components! "

This sensor module utilizes DHT11 as the sensitive component and has a bypass capacitor and a pull-up resistor on-board. It applies specific modules capture technology and digital temperature and humidity sensor technology to ensure that products with high reliability and excellent long-term stability.

Features:
Digital output
Voltage: 5 V
Single-wire communication
Pre-calibrated
Stable and long-term accuracy
3-pin interlock connector
Low cost and compact size

Package Includes:
3 x DHT11 Temperature and Humidity Sensor Module

2. ACROBOTIC MLX90614 Infrared Thermometer IR Temperature Detector Sensor Breakout Board for Arduino Raspberry Pi ESP8266 GY-906 MLX90614ESF

Feature

Read temperature without touching the object you're measuring with the MLX90614 Infrared (IR) Thermometer Sensor
Connect the two-wire interface (I2C) to your Arduino, ESP8266, Raspberry Pi, etc.
Supply voltage range is 4.5~5.5VDC
MLX90614 includes a low noise amplifier, a 17-bit ADC, and a powerful DSP module in a TO-39 throug-hole package
Includes 4-Pin header for easy connection to your development boards or solderless breadboard

Description

This breakout board provides a convenient way to start using the fantastic MLX90614 module, a high precision, small size, single-zone IR thermometer (temperature sensor)!

Want to read temperature without touching the object you're measuring? Then the MLX90614 IR Thermometer is the sensor for you! By detecting the Infra-Red (IR) light emitted by an object, this IC can read temperatures between -95 and 720F (-70 and 382.2C) with a whopping 17-bit resolution. That's 128 times more precise than the ADC on the ATmega328 microcontroller onboard an Arduino UNO, and implies that the sensor can distinguish temperatures between 25C and 25.02C without even coming in contact with the object!

This breakout board makes it easy to connect this sensor to your microcontroller board or single-board computer such as Arduino, ESP8266, BeagleBone or Raspberry Pi! The four pins correspond to power (VCC, GND) and I2C communication (SDA, SCL). We've included in our design pull-up resistors on the I2C lines as customary. They can be disabled, as usual, by using the solder jumpers on the back of the board.

Features:

• The onboard MLX90614 includes a low noise amplifier, a 17-bit ADC, and a powerful DSP module in a TO-39 throug-hole package
• This 0.45in0.66in breakout PCB facilitates using the MLX90614, specially on solderless breadboards!
• Sturdy (1.6mm), blue PCB with a 4-pin header on one side (Vdd, Vss, SDA, and SCL)
• 4-Pin header included (requires soldering!)

We have written useful guides for getting you started with the MLX90614:

• ESP8266: https://learn.acrobotic.com/tutorials/

Conclusion

All above are our suggestions for infrared thermometer raspberry pi. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using infrared thermometer raspberry pi with us by comment in this post. Thank you!