Expert choice for plate vise
When you want to find plate vise, you may need to consider between many choices. Finding the best plate vise is not an easy task. In this post, we create a very short list about top 10 the best plate vise for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 plate vise:
1. Tri-Vise PVL001 4" Plate Vise
Feature
Instantly holds materials fast and tight.Tightly holds almost anything: plastic and metal pipe, conduit, rebar, lumber and dowels.
Elevates materials off the ground to safely measure, cut, drill, weld, solder, finish and tighten fittings.
Does not allow materials to move or spin.
Multiple grip ports hold dozens of different shapes and sizes.
Description
Tri-Vise PVL001 Specifications: Capacity: 1/2" - 4" Material: Steel Color/Finish: Yellow Tri-Vise PVL001 Features: Instantly holds materials fast and tight. Tightly holds almost anything: plastic and metal pipe, conduit, rebar, lumber and dowels. Elevates materials off the ground to safely measure, cut, drill, weld, solder, finish and tighten fittings. Does not allow materials to move or spin. Multiple grip ports hold dozens of different shapes and sizes. Increases safety and production. Made in the USA.2. Rack-A-Tiers 13355 Plate Vise Multi-Purpose Portable Vise
Feature
Rack-A-Tiers 13355 Plate Vise Multi-Purpose Portable ViseDescription
The Plate ViseTM has many features not found in traditional vises. It is extremely lightweight yet durable and is easily carried to any workplace. It stores in any toolbox or simply hangs in any shop or garage. One of the great features of this vise is it s one piece construction without any moving parts. The openings or Grip PortsTM in the vise are designed and engineered to hold pipe, conduit, unistrut, lumber and several other materials. The contact points do not allow materials to move or spin. The vise elevates materials to a reasonable height for measuring, cutting, drilling or tightening fittings. It allows it s user to operate power and hand tools with both hands as they were intended. This helps eliminate potential accidents while saving valuable time and labor. With a weight of less than four pounds, the vise is extremely handy for rooftops and limited space jobs. It will hold 1/2 inch through 4 inch EMT conduit, rigid steel pipe, PVC and ABS. The vise will also hold several lumber sizes including but not limited to 1 x 2 , 2 x 2 , 2 x 4 , 2 x 6 and 4 x 4 . Other materials include deep and shallow unistrut, angle iron, copper tubing, fence post and irrigation pipe. This makes the Plate ViseTM extremely useful for electricians, plumbers, pipefitters, carpenters, landscapers, handymen and homeowners. Whether you re a construction worker, contractor, handyman or homeowner we are sure that you will be satisfied with the many uses of the Plate ViseTM. We are also quite confident that you will be pleased with the time and money you will save using this product. Tightly Holds Almost Anything:Plastic & Metal Pipe and Conduit 1/2 4 Rebar and Unistrut 7/8 & 1 5/8 Dowels and Lumber 1 x 2 , 2 x 2 , 2 x 4 , 2 x 6 and 4 x 4 PVC, ABSAngle Iron & TubingAnd Many More Materials3. Tri-Vise LLDSY-01 12-Inch Steel Lumber Lok Vise For Construction Workers, Handymen and Homeowners
Feature
Elevates material off the ground to safely measure, cut, drill, and finish all lumber projects.Locks lumber to keep it from moving, allowing you to have both hands-free.
Multiple grip ports hold dozens of different shapes and sizes from 2 inches to 12 inches.
Made of sturdy steel in a bright yellow color to increase visibility and safety.
Dimensions: 14"W x .25"D x 12"H
Description
The Lumber Lock is a revolutionary breakthrough for all construction and maintenance trades and is especially great for projects around the house that you'd like to do yourself. The Lumber Lock will hold dozens of different lumber shapes and sizes from 2"-12". It keeps lumber from moving and spinning for added speed and safety and it allows you to have both hands free for proper handling of power and hand tools. Your lumber is safely raised above the ground for measuring, cutting, drilling and finishing lumber projects. Lumber Lock is there to serve as an extra pair of hands.4. IRWIN Tools Record Replacement Jaw Plates and Screws for No. 6 Mechanic's Vise (T6D)
Feature
Use to replace worn parts on a Mechanics vise.Jaws are made from hardened steel.
Jaw plates are fully machined on all load-bearing surfaces.
6-inch plates fit #6 Mechanics vises.
Description
Use to replace worn parts on a Mechanics vise. Jaws are made from hardened steel. Jaw plates are fully machined on all load-bearing surfaces. 6-inch plates fit #6 Mechanics vises. IRWIN Tools Record Replacement Jaw Plates and Screws for No. 6 Mechanic's Vise (T6D)5. 8" x 8" Steel Bench Vise Plate Hitch Mounted for 2" Receiver 22" Receiver Bar
Feature
8" X 8" Vise Plate22" Receiver Bar
5/8" Hitch Pin
Rustproof, Powder Coated all Steel Construction
Mounting Holes Designed to Accommodate Most Vises
Description
This Pro-Grade Hitch Mounted Vise Plate allows you to take your vise to any job site or location where you can't mount to a bench. With its heavy duty all steel and powder coated construction, it is sure to stand up to all conditions. Fits a standard 2" receiver. SPECIFICATIONS 8" X 8" Vise Plate 22" Receiver Bar 5/8" Hitch Pin Rustproof, Powder Coated all Steel Construction Mounting Holes Designed to Accommodate Most Vises Includes Mouting Hardware for the Vise Plate CONTENTS Vise Plate with Receiver Tube (1) Hairpin Clip (1) Retaining Pin (1) Mounting Bolts (4) Washers (8) Locking Nuts (4) This listing is for the vise plate and bar only. It does not include a vise or hitch receiver.6. MaxxHaul 80356 Hitch Mount Vise Plate/Holder (with Adjustable Height)
Feature
Height can be adjusted to desired height for comfortability; Height adjust range: 18" in 2" incrementVise mount plate dimensions: 7-7/8" L x 7-7/8" w
Vise mounting holes: 5/8" x 2"
Comes with anti-rattle device for added stability
Overall dimensions: 22"long 7-7/8" wide x 22-5/8" high
Description
Use our MaxxHaul Hitch Vise Plate or Vise Holder to add portability to your vise so you can take it to your job site, remote location and other areas where bench top mounting is not possible. Hitch Mount Vise Plate features heavy duty all steel construction for strength and is finished with a powder coat to resist rust and corrosion for added durability. This vise holder fits any standard 2" x 2" hitch receivers. Must remove vise before putting vehicle in motion.7. Self Centering Pen and Bottle Stopper Drilling Vise
Feature
This robust and uniquely designed Self Centering Pen Drilling Vise keeps your pen blanks secured. The jaws are parallel to one another and remain square to your drill press table to ensure accuracy. The jaws can open wide enough for wider bottle stopper blanks as well. The Savannah Self Centering Drill Press Vise also includes three sacrificial MDF Plates to slide underneath the blanks to protect the vise base when drilling through blank.This vise can also be used to drill Both Stopper Blanks!
Vise will accept blanks up to 2-1/8" diagonally or up to 1-1/2" square.
The Self Centering Drill Press Vise also includes three sacrificial MDF Plates to slide underneath the blanks to protect the vise base when drilling through blank.
The solid metal construction makes this vise perfect for any pen turner.
Description
This robust and uniquely designed Self Centering Pen Drilling Vise keeps your pen blanks secured. The jaws are parallel to one another and remain square to your drill press table to ensure accuracy. The jaws can open wide enough for wider bottle stopper blanks as well. The Self Centering Drill Press Vise also includes three sacrificial MDF Plates to slide underneath the blanks to protect the vise base when drilling through blank. The solid metal construction makes this vise perfect for any pen turner.8. Vise Mount Plate, 7 W x 7 D x 4 H, Blue
Feature
Sold on AmazonDescription
' Vise Mount Plate, Width 7 In., Depth 7 In., Height 4 In., Material SteelBlue, Finish Powder CoatFor Use With Mfr. No. 951 167, 951 168, 951 169, 951 170, Includes Hardware '9. IRWIN Tools Record Replacement Jaw Plates and Screws for No. 8 Mechanic's Vise (T8D)
Feature
Use to replace worn parts on a Mechanics vise.Jaws are made from hardened steel.
Jaw plates are fully machined on all load-bearing surfaces.
8-inch plates fit #8 Mechanics vises.
Description
Use to replace worn parts on a Mechanics vise. Jaws are made from hardened steel. Jaw plates are fully machined on all load-bearing surfaces. 8-inch plates fit #8 Mechanics vises. IRWIN Tools Record Replacement Jaw Plates and Screws for No. 8 Mechanic's Vise (T8D)10. Kreg KBK-IP Kreg Bench Klamp Insert Plate
Feature
The Kreg Bench Klamp Insert Plate quickly adds multiple clamping locations to your workbenchMade of thick, hard-anodized aluminum for durability, the plate measures 3-by-4 inches and is 1/4-inch thick
Designed specifically to work with the Kreg Bench Klamp
Bench clamp insert plate quickly adds multiple clamping locations to your workbench
Made of thick, hard-anodized aluminum
Includes all mounting hardware and instructions; easy installation
Measures 3-by-4-by-1/4 inch (L x W x H); backed by 30-day warranty
Recent Comments