Expert choice for smoke detector model 1275
When you want to find smoke detector model 1275, you may need to consider between many choices. Finding the best smoke detector model 1275 is not an easy task. In this post, we create a very short list about top 10 the best smoke detector model 1275 for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 smoke detector model 1275:
1. Kidde 1275 Hardwire Smoke Alarm with Hush Feature and Battery Backup, Twin Pack
Feature
Ceiling or wall mount with smart hush feature temporally silences nuisances alarmsUnit 6-Inch in diameter, 9-Volt battery included
Tinned and stripped wiring harness
Interconnect able single or multiple stations
UL approved
2. Kidde 1276 AC Hardwired Smoke Alarm I12060 w/ Hush Feature
Feature
Provides a Hush feature to quickly silence nuisance alarms.Tamper resist locking feature deters alarm theft
Alarm memory flashes red LED indicating which unit was the initiating alarm in interconnected system.
Battery backup provides protection in case of power failure
Inter-connectable with up to 24 devices.
Description
The Kidde i12060 (Old Part Number: 1276) is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 10-year limited warranty. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.3. Kidde i12040 120v Ac/dc Smoke Alarm w/ Battery Back up Lot of 6 by KIDDE
Feature
Hush feature temporarily silences nuisance alarmsOne touch test button tests unit's electronic circuitry
Battery backup 9V battery included
Tamper resist locking pin helps deter alarm tampering and theft
UL Approved
Description
The Kidde i12040 is an AC/DC powered, ionization smoke alarm operating on a 120V power source with 9V battery backup. The Kiddie i2040 is an interconnected ionization smoke alarm that provides a dependable warning against potential fires through its ability to link up with other Kidde-compatible alarms. This means you'll be able to hear a single alarm no matter where you are in your home. The 120V, AC-powered alarm provides the earliest warning of smoke or fire threats, even during power outages. It also comes with a hush feature to temporarily silence nuisance alarms and a one-touch button to test the unit's electronic circuitry. The Kidde i12040 is convenient and reasonably priced. It provides a low profile, sleek design and comes with added protection and assurance with its included 9V battery backup. With temperature and relative humidity durability and the latest ionization sensing technology, the Kidde i12040 with alarm memory is the perfect alarm for any home. The Kidde i12040 has a horn alarm at an adequate 85 dB, is UL listed .4. Kidde AC Hardwired Interconnect Smoke Alarm with Hush I12040
Feature
Hush feature temporarily silences nuisance alarmsOne touch test button tests unit's electronic circuitry
9V Battery Backup (included).
Tamper resist locking pin helps deter alarm tampering and theft
Kidde smoke alarms meet the UL requirements
Description
The Kidde i12040A is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 10-year limited warranty. Part Number (Ordering Number): 21006378
5. Kidde i12040 120V AC Wire-In Smoke Alarm with Battery Backup and Smart Hush
Feature
Easy Installation - Front battery pull tab allows battery activation without removing alarm from mounting bracket. Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections. Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.Fewer Callbacks - One button design for easy operation and less confusion. Operates Hush and alarm test. Battery run down protection will shut down alarm memory when AC power is not present, reducing low battery chirp. Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features - Tamper resist locking feature deters alarm theft. Alarm memory flashes red LED indicating which unit was the initiating alarm in interconnected system.
Interconnectable - Connect up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user's guide for complete instructions.
Battery Backup - 9V Battery Backup (included).
Hush feature temporarily silences nuisance alarms
One touch test button tests unit's electronic circuitry
Battery backup 9V battery included
Tamper resist locking pin helps deter alarm tampering and theft
Kidde smoke alarms meet the UL requirements
Description
The Kidde i12040A is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 10-year limited warranty.6. Kidde 1275 Hardwire Smoke Alarm with Hush Feature and Battery Backup (2 Pack)
Description
Kidde 1275 Hardwire Smoke Alarm with Hush Feature and Battery Backup (2 Pack)7. Kidde 21006371 AC Hardwired Interconnect Photoelectric Hush P12040 Smoke Alarm, White
Feature
LED - Red LED indicates that the smoke alarm is operating properly, HushTM, and alarm condition. Green LED indicates the presence of AC powerPhotoelectric Sensor - Advanced photoelectric sensor may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Dust cover protects sensor during construction
Battery Backup (9V Battery Included) - Provides continuous protection even during power outages. Battery Pull Tab eliminates battery installation time and keeps battery fresh
Test Button - Tests unit's electronic circuitry, horn and battery function
Quick Connect Power Harness - Makes installation fast and easy
Description
The Kidde P12040 is a 120VAC powered photoelectric smoke alarm with 9V battery back up. This advanced smoke alarm has the ability to function as a stand-alone unit or in an interconnected system. The Kidde P12040 includes a test button, quick-connect power harness and offers a 10-year limited warranty. This alarm uses photoelectric sensing technology. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner that photoelectric alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. The Kidde model P12040 is a 120VAC powered alarm that includes a 9V battery backup to provide continuous protection during a power failure and included a quick connect power harness to make installation simple. Part Number (Ordering Number): 21006371 Architectural and Engineering Specifications - The smoke alarm shall be Kidde model P12040 or approved equal. It shall be powered by a 120VAC, 60Hz, 80mA source along with a 9V battery back up. The unit shall incorporate a photoelectric sensor with nominal sensitivity of 1.20%/ft to 3.36%/ft. The temperature operation range shall be between 40F and 100F (4C and 38C) and the humidity operation range shall be 5% - 95% relative humidity. The smoke alarm can be installed on any standard single gang electrical box, up to a 4 octagon junction box. The electrical connection (to the alarm) shall be made with a plug-in connector. A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices, of which 12 can be smoke alarms. With 18 initiation devices (smoke, heat, CO, etc.), interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. The unit shall provide optional tamper resistance that deters removal of the unit from the wall or ceiling. The alarm shall include a test button that will electronically simulate the presence of smoke and cause the unit to go into alarm. This sequence tests the units electronics, battery and horn to ensure proper operation. The unit shall include a piezoelectric horn that is rated at 85dB at 10 feet. The unit shall also include a low battery warning utilizing a brief alarm chirp every 30-40 seconds for a minimum of seven (7) days. The unit shall incorporate one red LED to indicate the alarms current status and mode of operation. The red LED will indicate one of two conditions: Standby Condition: The red LED will flash every 30-40 seconds to indicate that the smoke alarm is operating properly. Alarm Condition: When the alarm senses products of combustion and goes into alarm, the red LED will flash rapidly (one flash per second). The rapid flashing LED and pulsating alarm will continue until the air is cleared. The unit shall incorporate one green LED to indicate the presence of AC power. The unit shall at a minimum meet the requirements of UL217, NFPA72, The State of California Fire Marshall, NFPA 101 (One and two family dwellings) Federal Housing Authority (FHA), Housing and Urban Development (HUD). It shall also include a 10-year manufactures limited warranty.8. Kidde i9060 Battery-Operated Ionization Sensor Smoke Alarm with Hush Feature, 2-Pack
Feature
Hush feature temporarily silences nuisance alarmsBattery operated 9V battery included
Test button tests unit's electronic circuitry
Tamper resist locking pin helps deter tampering or theft
Kidde's smoke alarms meet the requirements of Underwriters Laboratories (UL), an independent facility that tests products for compliance with widely-accepted safety standards
Description
Protect your family from the dangerous effects of fire with the Kidde i9060 Premium Battery-Operated Ionization Sensor Smoke Alarm with Hush Feature, 1-Pack. This easy-to-install, single-station alarm has an ionization sensor that provides the best protection against fast flaming and other types of fires. It comes with one 9-volt battery.
|
 Features a red LED power light, test button to check alarm functions, and "hush" feature to temporarily quiet the horn. View larger. |
 The twist-off mounting plate provides for easy installation and quick battery changes. View larger. |
Every year, 70 percent of all home fire deaths occur in homes with no alarms or no working alarms, while nearly one quarter of smoke alarms in reported fires are not working. Installing an alarm like the i9060 is an affordable, easy way to help protect your family from the devastating results of a fire. Alarms give you more time to make an escape, especially if you're asleep when the fire starts. Ideally, they should be installed on every level of your home, and outside all bedrooms.
Ionization Sensor Technology
Designed to alert you and your family to the dangers of smoke and fire as soon as a fire starts, the battery-powered i9060 features an ionization sensor. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home.
Easy Operation with User-Friendly Features
User friendly and easy to operate, the i9060 includes a range of helpful features that help you maintain a properly functioning smoke alarm with minimal effort.
An easy-to-see, red LED flashes every 30 to 40 seconds to indicate that power is flowing to the unit, and a chirp will sound if the battery is running low. A hush feature temporarily silences nuisance alarms--a great feature for kitchen alarms--while a convenient test button lets you ensure that the electronics, horn, and battery are all working properly. For added peace of mind, twist-off mounting provides safe battery placement and fast, easy installation without wires. Plus, a tamper resist locking pin helps prevent both theft and tampering.
Compliancy and Warranty Information
The Kidde i9060 alarm is UL listed and is backed by a 10-year limited warranty.
About Kidde: A UTC Fire and Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that's rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.
What's in the Box
Kidde i9060 Premium Battery-Operated Ionization Sensor Smoke Alarm with Hush Feature, 9-volt battery, mounting hardware, and installation guide.
 Keep your family safe by placing alarms and extinguishers in each area of the house, and by having a fire escape plan. Click here for a detailed image. |
9. Smoke Alarm, Ionization, 9V
Feature
Price For: Each Visual Alert: Red LED Test Button: Yes Battery Backup: No Hush Button: No Operating Temp.: 40 Degrees to 100 Degrees F Features: Test Button, Intermittent Red LED Locking Pin: Yes Standards: UL, NFPA, Federal Housing Authority, Housing and Urban Development and California State Fire Marshal Guidelines Item: Smoke Alarm Diameter: 5" Height: 1-3/4"Manufacturers Warranty Length: 5 Year Limited Power Source: 9V Digital Readout: No Interconnection Capability: No Detection Method: Ionization Audible Alert: 85dB @ 10 ft., Horn Country of Origin (subject to change): China
Description
' Smoke Alarm, Detection Method Ionization, No Interconnection Capability, Power Source 9V, Audible Alert 85dB @ 10 ft., Horn, Visual Alert Red LED, Diameter 5 In., Height 1-3/4 In., Digital Readout No, Battery Backup No, Features Test Button, Intermittent Red LED, Hush Button No, Locking Pin Yes, Operating Temp. 40 Degrees to 100 Degrees F, Standards UL, NFPA, Federal Housing Authority, Housing and Urban Development and California State Fire Marshal Guidelines '10. Kidde i12040 120V AC Wire-In Smoke Alarm with Battery Backup and Smart Hush *4-Pack* CustomerPackageType: Standard Packaging Color: White Size: 4 Pack, Model: , Tools & Outdoor Store
Feature
Hush feature temporarily silences nuisance alarmsOne touch test button tests unit's electronic circuitry
Battery backup 9V battery included
Tamper resist locking pin helps deter alarm tampering and theft
Kidde smoke alarms meet the UL requirements
Recent Comments