fender flares mitsubishi eclipse buyer’s guide for 2022
We spent many hours on research to finding fender flares mitsubishi eclipse, reading product features, product specifications for this guide. For those of you who wish to the best fender flares mitsubishi eclipse, you should not miss this article. fender flares mitsubishi eclipse coming in a variety of types but also different price range. The following is the top 10 fender flares mitsubishi eclipse by our suggestions:
1. The Original EZ Flares Universal Flexible Foam Rubber Fender Flares Trim 1.5-Inch
Feature
The FAST & EASY way to protect your car or truck from everyday driving damage.Flexible FOAM rubber design attaches to virtually all cars & trucks.
Easy Peel & Stick installation requires no drilling or screws.
Made in USA with super strong 3M adhesive.
***NOTE: 8.5 feet per roll - Please measure your car before ordering***
Description
EZ Flares are made from a FLEXIBLE FOAM rubber allowing them to mold and bend to the shape of your fenders. Give your vehicle a more aggressive appearance in no time with our 3-Step Peel & Stick installation process. Universal compatibility allows the EZ Flares to be installed on virtually all makes and models. Quality 3M adhesive tape will not be affected by wet or cold weather and will easily endures all all types of weather, car washes and high speeds. Made in USA. ***NOTE: 8.5 feet per roll - Please measure your car before ordering***2. uxcell 30 Pcs 8mm Hole Retainer Clips- Plastic Drive Rivets Mud Flaps Bumper Fender Push Clips for Nissan
Feature
PERFECT REPLACEMENT FOR OEM- the retainer clips are made of high quality plastic, have a good fit and are of equal quality to the originalsTHE SAME SIZE & SHAPE AS ORIGINAL - Head dia:20mm/0.8inches; stem length:9mm/3.5inches & fits:8mm/0.32inches hole; total length: 22mm/0.88 inches
UNIVERSAL FIT- These push-type plastic clips will fit on most of auto parts with 8mm hole, hold your parts very tightly
WIDELY USE-Apply for fender liner, plastic panels,wheel liners,bumper frames etc.
UXCELL (U excel !) is the sole authorized Seller of uxcell products
Description
Product Name:Plastic Push-Type Bumper Retainer
Material: Plastic
Color:Black
Product size:
Head Diameter: 20mm/0.8inches
Stem Length: 9mm/3.5inches
Fit Hole Size: 8mm/0.32inches
Package Content: 30 (+/-2%)xPlastic Rivet (Non-OEM)
Application:
These rivet fasteners are made of plastic material, suitable for car use.
Car's good accessory, commonly used for fitting side skirts, bumpers and other trim.
These clips are suitable for firmly holding anything within a fit 8mm diameter hole.
They can be used on buses, trains, planes, truck, caravans and cars.
3. Duraflex ED-YBL-420 Shine Fender Flares - 4 Piece Body Kit - Fits Mitsubishi Eclipse 2000-2005
Feature
Fits 2000-2005 Mitsubishi Eclipse OnlyHand laid, high quality 6 oz. fiberglass
Signature black finish
Proprietary polymer blend for maxiumim flexibiiity
Description
Kit Material: FRPProduct Type: Fender Flare
Style: Shine
Weight: 7 lb
Extreme Dimensions has revolutionized the fiberglass market with our premium Duraflex aerodynamics. Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex technology obtains a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. This revolutionary product allows the consumer to receive a premium fiberglass product at an affordable price.
4. 2000-2005 Mitsubishi Eclipse Duraflex Shine Fender Flares - 4 Piece
Feature
Hand laid, high quality 6 oz. fiberglassSignature black finish
Proprietary polymer blend for maximum flexibility
High quality weather resistant aluminum mesh grille (where applicable)
Reduced damage rate up to 75%
Description
2000-2005 Mitsubishi Eclipse Duraflex Shine Fender Flares - 4 Piece5. uxcell 30 Pcs 9mm Black Nylon Push-Type Retainer Clips Car Interior Door Trim Clips Rivet Fastener
Feature
PERFECT REPLACEMENT FOR OEM- the retainer clips are made of high quality nylon, have a good fit and are of equal quality to the originalsTHE SAME SIZE & SHAPE AS ORIGINAL - Head dia:18mm/ 0.7 inches; stem length: 22mm/ 0.9 inches & fits: 9mm/ 3.5 inches hole
UNIVERSAL FIT- These universal push-type plastic clips will fit on most of auto parts with 9mm hole, hold your parts very tightly
WIDELY USE-Apply for fender liner, bumper fender, splash guard etc.
PACKAGE INCLUDE:30(+/-2%) PCS nylon push-type bumper retainer clips
Description
Product Name:Nylon fastener rivet clips
Material:Nylon
Color:Black
Product size:
Head Diameter: 18mm/ 0.7 inches
Stem Diameter: 22mm/ 0.9 inches
Fit Hole Size:9mm/ 3.5 inches
Package Content:30(+/-2%)x Nylon Rivets (Non-OEM)
Application
Commonly used for fitting side skirts, bumpers and other trim.
These clips are suitable for firmly holding anything within a fit diameter hole.
They can be used on buses, trains, planes, truck, caravans and cars.
6. Make Auto Parts Manufacturing - ECLIPSE 00-05 FENDER LH, w/One Round Hole, GT/GTS Model - MI1240142
Feature
ITEM FITMENT - 2000 to 2005 Mitsubishi EclipseAll products are covered by a limited warranty against manufacturing defect
FEATURES - Molding holes: With Molding Holes,Recommended use: OE Replacement,Material: Steel,Location: Front, Driver, Side,Color finish: Primed
NOTES - With stone guard provision
Description
DESCRIPTION
Make Auto Parts Manufacturing Front, Driver, Side Fender for 2000 to 2005 Mitsubishi Eclipse
PACKAGE INCLUDES
Single Fender (Front, Driver, Side)
SPECIFICATIONS
Molding holes - With Molding Holes
Recommended use - OE Replacement
Material - Steel
Location - Front, Driver, Side
Partslink - MI1240142
Color finish - Primed
Replaces OEM number - MR392631
FITMENT
For 2000 to 2005 Mitsubishi Eclipse
NOTES
With stone guard provision
7. MOTOALL Nylon Fender Trim Panel Bumper Shield Retainer Fastener Rivet Push-Type Clips for 9mm Hole Honda Mitsubishi - 100pcs
Feature
Made of high-quality white & black nylon material, anti-wear and anti-corrosion, would not break or crack easily during useHead diameter: 17mm/0.67"; stem length: 13mm/0.51"; total length: 20mm/0.79"; fit hole diameter (max.): 9mm/0.35"
Widely used for radiator yoke, trim panel, door trim, door panel, bumper, car fender, side skirt, grille, engine cover and splash guard shield retainers rivet clips replacement
Push-in type fastener clips. Easy to fasten bumper, fender flare, defender, guard and mud flap. All you need to do is a simple push. Very convenient to use
Package includes: 100pcs (2%) clips
Description
Specification:Universal fastener clips
Material: Nylon
Color: White & Black
Head Diameter: 17mm/0.67"
Stem Length: 13mm/0.51"
Total Length: 20mm/0.79"
Fit Hole Diameter(Max.): 9mm/0.35"
Better replacement for original radiator yoke, bumper and fender clips
Commonly used for fitting side skirt, bumper, car fender, door trim panel, interior trim panel and various trim panels.
Fitment:
(For reference only. Please verify the size of your existing clips.)
Honda Accord 1998-2008
Honda Accord Crosstour 2010
Honda Civic 1998-2008
Honda CR-V 1998-2008
Honda CR-Z 2011
Honda Element 2003-2008
Honda Fit 2007-2008
Honda Insight 2000-2006
Honda Odyssey 1998-2008
Honda Pilot 2003-2008
Honda Ridgeline 2006-2008
Honda S2000 2000-2008
Mitsubishi Diamante 1998-2004
Mitsubishi Eclipse 1998-2008
Mitsubishi Endeavor 2004-2008
Mitsubishi Galant 1998-2008
Mitsubishi Lancer 2002-2008
Mitsubishi Montero 1998-2006
Mitsubishi Montero Sport 2004
Mitsubishi Outlander 2003-2008
Mitsubishi Outlander Sport 2011
Mitsubishi Raider 2006-2008
Package includes:
100pcs (2%) clips
8. uxcell 100 Pcs Universal Plastic Rivet Car Door Trim Retainer Fastener Clips
Feature
Product Name: Clips/Rivets/Fastener; Color: White; Fit Hole Size: 7mm/0.28"Head Diameter(max.): 16mm/0.63"; Stem Length: 12mm/0.47"; Total Length: 17mm/0.67"
Quantity: (-/+2%)100; Interchange Part Number: Under Engine Splash Guard Rivet Fastener Clips; Manufacturer Part Number: Plastic Push-Type Bumper Retainer Clip
Other Part Number: Screw Fender Body Door Trim Panel Hood; Applications1: Defender Door Card Interior Weatherstrip Moulding; Applications2: NYLON CHRISTMAS TREE Carpet Floor Mat Clips
Material: Plastic; Package Content: 100(+/-2%) x Plastic Rivet
Description
1.These rivet clip are made of plastic material, suitable for car use.2.These clips are used by many manufacturers to hold all pieces of trim and upholstery including carpet, door cards, roof lining, engine covers, landing panels, boot linings, wheel arch linings etc.
9. uxcell Plastic Rivets Push in Type Fastener Clips 8.5mm x 16mm x 12mm 20pcs
Feature
20pcs car plastic rivet clipsFit Hole Size: 8.5mm/0.33"
Application: Defender Door Card Interior Weatherstrip Moulding
Fit for ACURA 1997-2003 CL 1996-2001 Integra 2001-2015 MDX, 1997-2005 NSX, 1996-2012 RL, 2002-2006 RSX, 1997-2014 TL, 2004-2014 TSX, 2010-2013 ZDX
Fit for HONDA 1997-2011 Accord, 2008-2012 Civic, 1999-2015 CR-V, 2010-2015 CR-Z, 2003-2007 Element, 2007-2007 Fit, 2000-2014 Insight, 1996-2015 Odyssey, 2003-2015 Pilot, 1997-2001 Prelude, 2000-2007 S2000, 2006-2014 Ridgeline
Description
Used widely for car fender, bumper, door, side skirt or other car surface.They can be used on motorcycle, buses, cars, truck, caravans, etc.
This is an Non-OEM Product, Accessory Only!
10. uxcell 30 Pcs White Auto Dashboard Splash Guard Panel Retainer Clip
Feature
30pcs car plastic rivet clipsFit Hole Size: 13.5 x 8mm/0.53" x 0.31"(L*W)
Applications1: Defender Door Card Interior Weatherstrip Moulding
Applications2: NYLON CHRISTMAS TREE Carpet Floor Mat Clips
Description
These rivet fasteners are made of plastic material, suitable for car use.100% Brand New .
High quality.
Carsgood accessory, commonly used for fitting side skirts, bumpers ,dashboardand other trim.
This is a non-OEM product, accessory only.
Recent Comments