Looking for a beadsmith punch? Have a look at this 2022 guide!
When you want to find beadsmith punch, you may need to consider between many choices. Finding the best beadsmith punch is not an easy task. In this post, we create a very short list about top 10 the best beadsmith punch for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 beadsmith punch:
1. Beadsmith PLHP15 Metal Hole Punch Pliers for Sheet Metal, 1.5mm
Feature
Quantity: 1 PieceCreate a smooth, clean hole without barbs or rough edges
Made of steel; Rubber handles
Description
These pliers punch a 1.5mm hole in metal sheet stock up to 20 gauge. They create a smooth, clean hole without barbs or rough edges. Plus, with the gauge guard, the area around the hole will be free of unsightly indentations! Instructions for using the gauge guard: Hold the pliers shut. When properly adjusted, there should be enough space to insert your metal piece between the widest part of the pin and the bottom jaw of the pliers with a little extra room left over. If the metal doesn't fit or if there's no extra space, simply expand the jaw opening a little farther by turning the gauge guard screw to the right. (Turn right for heavier gauges and left for lighter gauges.) NOTE: If the adjustment screw is not properly set, you may cause damage to your pliers due to extra stress and tension on the plier jaws. Measurements: 6" long and 2.25" wide at the handle. The hole punch is 1.5mm in diameter and will go through 20 gauge wire or thinner. Includes one bonus replacement pin. Quantity: 1 BeadSmith 1.5mm metal hole punch plier.2. Beadsmith Metal Hole Punch 1.25mm (1.2)
Feature
1.25mm Metal Hole Punch PliersPunches at 1.25mm hole in sheet stock up 22 gauge
Creates a smooth hole with no rough edges or dents in sheet
Great for creating pendants, earrings, and charms
Description
Punches a 1.25 mm hole in sheet stock up to 22 gauge. Creates a smooth hole with no rough edges or dents to sheet. Great for creating pendants, earrings or charms. Includes extra pin.3. BeadSmith 2 Hole Metal Punch Makes Holes, 1.5mm/2mm, silver, silver, 1.5mm/2mm
Feature
Punch metal sheet stock up to 16 gauge thickReplaceable pins are laser-etched for lifetime identification
Approximately 5 inches long when screw bars are parallel to the base
Description
This hole punch from Bead Smith is a precise and easy-to-use tool for punching clean holes through sheet metal. Carbon steel with durable, heat-treated pins. Deeper, extended 3/4" (19mm) reach. Creates two holes sizes (1.5mm & 2mm). The 1.5mm punch is ideal for riveting and cold connections.4. Beadsmith Replacement Pins For 1.5mm Metal Hole Punch Plier (2 Pack)
Feature
Color:Materials: Steel
Measurements: 1.5mm
Quantity: 1 Card
Shape: Other
Description
These replacement pins are sized for the BeadSmith's 1.5mm Metal Hole Punch Pliers (XTL-0068). They are also compatible with the Vintaj Special Edition - 1.5mm Rivet Hole Punch Pliers For Sheet Metal (XTL-0059) TO REPLACE PIN: 1) Remove both nuts at the tip by turning them counter-clockwise. Use chain or flat nose pliers if needed to loosen nuts. 2) Remove the old pin and insert the new. 3) Replace the nuts, turning clockwise to fasten pin. Quantity: 2 Pins and 4 Nuts5. Short Jaw Hole Punch Pliers, 1.5mm
Feature
Tool is 5.25" long. The pin is 1.5mm diameterOne (1) replacement pin included. When worn, the pin can easily be changed for a clean cut every time
We highly recommend eye protection with the use of any tools
Description
These Vintage pliers will punch a 1.5mm hole into Vintage blanks up to 20 gauge thick. Ideal for riveting or punching additional holes in blanks to create drops and connectors. The pliers have ergonomic handles and are made of thick carbon steel. If the adjustment screw is not properly set, you may cause damage to your pliers due to extra stress and tension on the plier jaws.6. Eurotool EuroPunch 1.25mm Round Hole Punch Pliers for Sheet Metal
Feature
These hole punch pliers will punch copper or silver as thick as 18 gauge.Will create a clean 1.25mm hole without rough edges or burs in sheet metal stock.
Measurements: Pliers are 5 1/4" Long. Punch pin is 1.25mm in diameter and will create 1.25mm round holes.
Description
These hole punch pliers will punch copper or silver as thick as 18 gauge. Exactly what you need to easily add a hole to that stamping, metal blank or sheet stock.Will create a clean 1.25mm hole without rough edges or burs in sheet metal stock. The pliers have ergonomic handles and are made of thick carbon steel. One (1) replacement pin included. When worn, the pin can easily be changed for a clean cut every time. Measurements: Pliers are 5 1/4" Long. Punch pin is 1.25mm in diameter and will create 1.25mm round holes. PLEASE NOTE: We highly recommend eye protection with the use of any tools. These pliers are intended for beading and other fine hobby work. Not recommended for heavy duty applications such as automotive, home improvement, or maritime use.7. Darice Euro Metal Hole Punch
Feature
Metal hole punch pliers will punch a hole in copper or silverDescription
Darice Euro metal hole punch pliers will punch a hole in copper or silver up to 18 Gauge in thickness. There is 1 piece per package.8. Beadsmith Replacement Pins For 1.25mm Metal Hole Punch Plier (2 Pack)
Feature
Color:Materials: Steel
Measurements: 1.25mm
Quantity: 1 Card
Shape: Other
Description
These replacement pins are sized for the BeadSmith's 1.25mm Metal Hole Punch Pliers (XTL-0058). TO REPLACE PIN: 1) Remove both nuts at the tip by turning them counter-clockwise. Use chain or flat nose pliers if needed to loosen nuts. 2) Remove the old pin and insert the new. 3) Replace the nuts, turning clockwise to fasten pin. Quantity: 2 Pins and 4 Nuts9. Short Jaw Hole Punch Pliers-5.5
Feature
Style: Hole Punch PliersDescription
Used in this video tutorial:. Product Spotlight: Vintaj Tools. . These Vintaj pliers will punch a 1.5mm hole into Vintaj blanks up to 20 gauge thick. Ideal for riveting or punching additional holes in blanks to create drops and connectors. The pliers have ergonomic handles and are made of thick carbon steel. One (1) replacement pin included. When worn, the pin can easily be changed for a clean cut every time. NOTE: If the adjustment screw is not properly set, you may cause damage to your pliers due to extra stress and tension on the plier jaws. Measurements: 5.25" long. The pin is 1.5mm diameter. PLEASE NOTE: We highly recommend eye protection with the use of any tools. These pliers are intended for beading and other fine hobby work. Not recommended for heavy duty applications such as automotive, home improvement, or maritime use.10. Short Jaw 1.5mm Holepunch, X'tra Strong +1 Extra Pin - PLHP15-SH
Feature
Ideal for cold connections and creating pendantsCreates a smooth hole with no rough edges or dents in sheet
One bonus replacement pin included
Recent Comments