Looking for a furniture legs 4 inch? Have a look at this 2022 guide!
When you want to find furniture legs 4 inch, you may need to consider between many choices. Finding the best furniture legs 4 inch is not an easy task. In this post, we create a very short list about top 10 the best furniture legs 4 inch for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 furniture legs 4 inch:
1. Leg Daddy 4" Walnut Finish Square Tapered Wooden Sofa Legs, Set of 4
Feature
Height (incl. glide): 4"Top Width: 3 7/8"
Bottom Width: 3"
Material Type: Wood
LIFETIME SERVICE POLICY
Description
LEG DADDY is a registered trademark of Homeplace Group, Inc.
The Importance of Good Sofa Legs
Your entire sofa, couch, chair, ottoman and other furniture pieces rest on the leg. If the leg is loose or defective, the result can be an uncomfortable use of the furniture or structural damage to the furniture item because of uneven stress loads being placed on the frame. It is important, not only for appearance sake, but also for the well being of your furniture to keep the legs in good repair.
The Leg Daddy 4" Walnut Finish Square Tapered Wooden Sofa Legg
This leg is attached to the furniture item with a 5/16" hanger bolt. Attachment and removal of the leg is easy. The leg is simply turned to the right to install and to the left to remove. This wooden leg is beautifully finished in a walnut finish which highlights the grain beautifully. The wood is strong and durable and is equipped with a plastic glide on the bottom of the leg
Special Note
There are three available sizes of Hanger Bolts. Please carefully check the hanger bolt size on your present leg to assure that your new legs will be compatible. The 5/16" bolt is the most common size, especially in American-Made furniture. M8 (or 8mm) bolts are typically seen in IKEA furniture and some other imported items, while M10 (10mm) is seen in other European imports (Natuzzi, etc.) The three sizes of hanger bolts are NOT cross-compatible, so please check carefully before ordering. M8 and 5/16 look almost the same, so be sure to check the fit with a bolt or nut, and not just with a tape measure.
Variation in Color and Grain of Wood Furniture Legs
Please note that wood is a naturally sourced material, with naturally-occurring variations in color, texture, and grain pattern. As a result, each couch leg may differ slightly from the photograph shown on the website.
HPG Ltd. Lifetime Service Policy
2. Leg Daddy 4" Dark Finish Square Tapered Pyramid Wooden Sofa Legs, Set of 4, 5/16" Hanger Bolt
Feature
Height: 4", Top Width: 3 3/4", Bottom Width: 2 1/2"Hanger Bolt: 5/16" - Make sure to measure your attachment point! Unsure of what size hanger bolt you need? Consider purchasing a Leg Daddy Hanger Bolt Fit Test Kit
Raise the height of your sofa or change the style by replacing the legs.
Hardwood with Dark Cherry Finish. Plastic glide on the bottom protects hard floors.
Leg Daddy legs aren't just for sofas! Chairs, Love seats, and ottomans all have legs on them as well
Description
Our sofa legs are not just for the sofa. They also fit well and look well on chairs, ottomans, and other furniture items.The Importance of Good Sofa LegsYour entire sofa, chair, ottoman and other furniture pieces rest on the leg. If the leg is loose or otherwise defective, the result can be an uncomfortable use of the furniture. Defective legs can lead to structural damage to the furniture item because of uneven stress loads being placed on the frame. It is important, not only for appearance sake, but also for the well being of your furniture to keep the legs in good repair.
The Leg Daddy 4" Dark Finish Tapered Pyramid Sofa Leg This leg is attached to the furniture item with a 5/16" hanger bolt. Attachment and removal of the leg is easy. The leg is simply turned to the right to install and to the left to remove. This wooden leg is beautifully finished in a Dark Walnut finish which highlights the grain beautifully. The wood is strong and durable and is equipped with a plastic glide on the bottom of the leg.
Special Note Please be advised that there are two common sizes of Hanger Bolts. The most common size hanger bolt for American-Made furniture is 5/16". For imported furniture, especially from Europe (IKEA, Natuzzi, etc.), the larger Metric 10mm (M10) size is common. These sofa legs are NOT compatible with M10 attachment points.
Variation in Color and Grain of Wood Furniture Legs Please note that wood is a naturally sourced material, with naturally-occurring variations in color, texture, and grain pattern. As a result, each couch leg may differ slightly from the photograph shown on the website.
LEG DADDY is a registered trademark of Homeplace Group, Inc.
3. Leg Daddy 4" Round Tapered Plastic Sofa, Couch, and Chair Legs, Set of 4
Feature
Height: 4" - Top Width: 2" - Bottom Width: 1-3/4"Industry Standard 5/16" Diameter Hanger Bolt Pre-Installed
Made of High-Density, Heavy Duty Plastic
Attractive Brown Color and Wood-Grain Pattern
LIFETIME SERVICE POLICY
Description
LEG DADDY is a registered trademark of Homeplace Group, Inc.Sofa, couch, or chair legs can get really worn, scratched and dated. An inexpensive leg replacement can update and revitalize your room.
Make getting in and out of your couch, chair, sofa, or loveseat easier by adding taller legs to raise the height of the sofa. These standard legs are made from High Density Polyethylene (HDPE) and are 5" tall for easy replacements on most sofas, chairs, couches and furniture.
A 5/16" hanger bolt is pre-installed (as shown in the picture) and is the most common size, fitting most couches or sofa frames. (Some imported furniture from Europe and Asia have a slightly larger 10mm - also called M10 - attachment point. Please double-check compatability before ordering.)
HPG Ltd. Lifetime Service Policy
Our Ltd. Lifetime Policy runs from the original date of purchase and covers the repair of manufacturing defects or replacement of your purchased product. Item must be clean and free of stains or damage. Transportation charges and a Policy Service Fee are the responsibility of the consumer. To email your clear images of the issue go to the Homeplace Group's storefront for our contact information. Then you will receive information on the next steps and/or additional information on this policy.
4. ProFurnitureParts 4" Inch Espresso Dark Finish Square Tapered Pyramid Wood Sofa Legs Set of 4
Feature
Height: 4 inches; Top Width: 4 3/4 inches; Bottom Width: 3 1/4 inchesAttaches with pre-installed 5/16" Hanger Bolt, this is a Standard Size for American Furniture
Packaged and Sold as a Set of 4 In Espresso Color
Wood is a natural material, every wood leg is unique. Variations in color and grain pattern is typical . Color and variation of the grain are normal and since wood is a natural material, each leg may differ slightly from the stock photo.
Listing By ProFurnitureParts
Description
Works for sofas, sectionals, ottomans, and other household furniture. Packaged and sold as a set of 4 and is easy to install with the pre-attached 5/16" Hanger bolt. Furniture requiring 10mm hanger bolt will not be compatible with these legs as they are 5/16.5. Action Club 4inch Sofa/Chair/Ottoman Wood Tapered Furniture Leg Square Pyramid 5/16" Bolt, Set of 4 (4inch)
Feature
Made of high quality oak wood with Dark FinishHeight: 4", Top Width: 3.75", Bottom Width: 2.5"
Hanger Bolt: 5/16"(M 8) - Make sure to measure your attachment point
Raise the height of your sofa or change the style by replacing the legs.
Set of 4 Legs,perfect for sofas Chairs, Love seats, and ottomans.Attachment and removal of the leg is easy.
Description
Features:Made of high quality oak wood with Dark Finish
Height: 4", Top Width: 3.75", Bottom Width: 2.5"
Hanger Bolt: 5/16" - Make sure to measure your attachment point.
Raise the height of your sofa or change the style by replacing the legs.
Set of 4 Legs,perfect for sofas Chairs, Love seats, and ottomans.Attachment and removal of the leg is easy.
Package:
4 x wood furniture leg
Note:Please note that wood is a naturally sourced material, with naturally-occurring variations in color, texture, and grain pattern. As a result, each couch leg may differ slightly from the photograph shown on the website.
6. ProFurnitureParts 4" Inch Dark Cherry Finish Square Tapered Wood Sofa Legs W/ Leg Plates
Feature
Height: 4 inches; Top Width: 3 3/4 inches; Bottom Width: 2 1/2 inchesAttaches with pre-installed 5/16" Hanger Bolt, this is a Standard Size for American Furniture
Mounting Leg Plates W/ Screws Included
Wood is a natural material, every wood leg is unique. Variations in color and grain pattern is typical . Color and variation of the grain are normal and since wood is a natural material, each leg may differ slightly from the stock photo.
Listing By ProFurnitureParts
Description
4" Inch Dark Cherry Finish Square Tapered Wood Sofa Legs By ProFurnitureParts and 5/16 Hanger Bolt, Sold as a Set of 4. This legs are perfect for sofas, ottomans and tables.Mounting Leg Plates W/ Screws Included, Offer By ProFurnitureParts.7. 4" tall Sleek Tapered Adjustable Leg, Brushed Nickel Finish, Set of Four Legs
Feature
Modern, contemporary furniture leg with a sleek tapered designFinish: Nickel
Height: 4" ; Leg Diameter: Tapers from 1-7/16" to 3/4"
Adjustable leveler foot increases height up to 3/8" (10mm)
400 lbs. vertical load rating per leg
Description
A simple, yet elegant modern furniture leg with an adjustable leveler foot. Comes in a nickel finish. Mounting plate is integrated in to the leg, with four screw holes for easy attachment. Used for furniture pieces, couches and hotel cabinets. Classy look goes well with kitchen cabinets. Sold as a set of four legs.- Height: 4"
- Finish: Nickel
- Mounting plate: 2-3/8" (60mm) dia. with 4 screw holes for attachment
- Top diameter: 1-7/16" (36mm)
- Bottom diameter: 3/4" (19mm)
- Foot diameter: 1-3/4" (45mm)
- Foot thickness: 13/16" (20mm)
- Leveler foot allows additional 3/8" (10mm) upward height adjustment for uneven floors
- 400 lbs. vertical load rating per leg
- Sold as a set of four legs
8. 4 inch Pyramid Acrylic Furniture DIY Legs Clear Glass Bookcase Feet for Coffee Table End Tables Sideboard Buffets Footstool Cabinet Bed Pack of 4
Feature
HIGH QUALITY - The furniture legs are made of acrylic. The acrylic legs are well polished and finished under strict quality control..BEAUTIFUL LOOK - The pyramid shaped furniture legs are sleek, transparent and durable.
EASY TO INSTALL - To replace the furniture legs is a fast and inexpensive way to retrofit your furniture and upgrade your house decor. Extend the life of antique furniture with the modern clear furniture feet.
MODERN & STURDY - The acrylic legs are strong to support furnitur, and help to raise the height of all kinds of furniture with the furniture legs. Suitable for sofa, Cabinet, armchair, cupboard, couch and etc.
IMPORTANT - Each legs is attached with metric M8(8mm) Screws. Before purchase, please check it and make sure the M8 bolts fit the existing hardware.
Description
The acrylic furniture legs fit all kinds of furniture and upgrade the old furniture. Give them a new look.The acrylic furniture legs are made of clear acrylic, modern, transparent and sleek.
The acrylic furniture legs are ideal for Sofa, Cabinet, Bed, Bookcase couch, bed table, buffet, footstool and etc.
Each Sturdy leg can hold up to 400lbs.
Dimensions: 4 inches high, 2 inch top, 1.6 inch bottom,. See dimension chart for detail.
The acrylic furniture legs are easy to install with the pre-drilled M8 bolts.
Please note the bolt is standard metric M8 (8mm) bolt. The bolt can be removed from the clear furniture legs. If the bolts doesn't fit the existing hardware, you can use glue to attach acrylic legs to furniture.
.
Be tired of the old furniture?
The old legs are worn-out but you don't want to simply throw away the furniture?
The acrylic legs can replace the old legs and renew old furniture. It is a good choice to change their style.
Use acrylic legs is an easy, fast and economic way to upgrade your furniture and house decoration.
9. 4" Solid Furniture Legs,Mid-Century Modern 100% Hard Dutch Wood,Perfect for Sofa, Couch, Ottoman, Bed,Coffee Table Tapered Legs,Set of 4 with Leg Mounting Plates
Feature
100% SOLID HARDWOOD - Built with highest quality solid wood and industrial grade hardware, these sturdy replacement furniture legs are constructed with the utmost attention to detail,eco friendly and all natural these upgraded legs will have everyone wondering if you bought a whole new furniture set!EASY INSTALLATION & UNIVERSAL FIT - Metal Mounting Plates + Screws +built -in floor protection+ Pre-installed 5/16-inch Hanger Bolts mean that you can mount these legs on any Made In USA or Imported Furniture with ease,pre-installed, thick felt floor protectors ensure that your hardwood floors stay in pristine condition! All of the high quality hardware you need is included with your order to ensure smooth installation.
FUNCTIONAL DESIGN - These legs make great additions to all sorts of DIY projects: desks, coffee tables, upholstery and more,beautiful color wood-grain pattern goes Suitable for any decor.
DIMENSION - Package includes 4 x sofa legs( approx Height: 4", Top Width: 2 1/5", Bottom Width: 1 2/5")with M8 hanger bolt,16x screws(25mm),4x metal mounting plates(48mm x48mm)
FULL LIFETIME WARRANTY-100% satisfaction guarantee, 100% worry-free guarantee, 5-year manufactures guarantee! 180 day return&money back guarantee, we're offer the premium quality and the best service, no matter what reason cause you don't love it, we'll replace it or reimburse you every cent back!
Description
We have many great quality furniture legs to offer you, We offer only the highest quality legs,With these legs you can change the style of your furniture with ease. Whether your need is small or large. Easy INSTALL REPLACE your lost or damaged legs in less than 5 minutes Works great with Coffee Table, Night Stands, Desk, End Table, Retail Display, Chairs and more!Note:
Wood is a natural material, with naturally-occurring variations in color, texture, and grain pattern. As a result, each couch leg may differ slightly from the photograph shown on the website
With this kit you will receive
4 Hardwood Dutch furniture legs, This leg is attached to the furniture item with a 5/16" hanger bolt
4 T-Plate,Each T-Plate is 1.9" by 1.9" (L x W) and 1/4" deep (approx). Plates have 5/16" threaded (M8) attachment holes for hanger bolts ,have 4 unthreaded holes(4mm).
16 pcs of screw adapters for 4mm unthreaded holes.
About our services:
If you have any questions, please kindly feel free to contact us, we promise to reply you within 24 hours.
If you are satisfied with our products, please don't forget to leave 5 stars Positive Feedback, we will appreciate your encourage.
If you are not satisfied, before you leave the Negative/Neutral feedback, contact us and let me know that, we will resolve the problem till you satisfy.
Thanks for your support and enjoy your shopping!
10. 4.1/2" Turned Tapered Sofa Leg (Set of 4)
Feature
Replacement Furniture FeetSolid Hardwood, Walnut Stain
Great For Any Upholstery Furnishings
Pack Of 4 Legs
Recent Comments