pool stick table holder buyer’s guide
We spent many hours on research to finding pool stick table holder, reading product features, product specifications for this guide. For those of you who wish to the best pool stick table holder, you should not miss this article. pool stick table holder coming in a variety of types but also different price range. The following is the top 10 pool stick table holder by our suggestions:
1. Q Claw 3 Pool Cue Holder Color: Black
Feature
Cue ClawWeighted 3-cue holder
Sits on edge of a table
Description
QHQC3 BLACK Color: Black Features: -Cue holders Q claw 3-cue holder. -Weighted 3-cue holder. -Sits on edge of a table. -Cue claw. Item: -Pool Cue Accessories. Country of Manufacture: -United States. Dimensions: Overall Length - Top to Bottom: -3.75". Overall Width - Side to Side: -4.5". Overall Product Weight: -1 lbs.2. Q-Claw Cue Rest, Billiards 2 Pool Cues, BLACK
Feature
Sits on the edge of the table and holds 2 cues.No fumbling with screws or bolts to use it.
Easily fits in the Accessory pocket of your case.
Description
Here it is the best cue rest I have found. Sits on the edge of the table and holds 2 cues. This claw is heavy and stays where you place it. No fumbling with screws or bolts to use it. Just set it down and you are ready to go.3. Iszy Billiards Portable 3 Pool Cue Stick Holder Stand Rest, Black
Feature
Portable Pool Cue HolderMade of durable foam rubber
Holds 3 cues
Description
Balanced weighted to stay on table or shelf - Cues not included. Made of durable foam rubber. Portable Pool Cue Holder.4. Extreme EXC-3 Weighted 3-Cue Pool Cue Holder, Black
Feature
Weighted 3-cue pool cue holderSelf-weighted compact design lays flat on a tabletop - or any horizontal surface
Protects your pool cue from crashing to the ground
Available in 3 sizes: 2-cue, 3-cue and 4-cue
Comes in your choice of 4 colors: blue, black, green and purple
Description
Keep your cues out of harms' way on league night with an Extreme EXC-3 weighted 3-cue pool cue holder. Made to rest on the top of any horizontal surface, this compact plastic self-weighted cue holder will hold your cues + enough quarters to keep your hot streak rolling. Lay the holder on the top of a table with the cue grooves hanging over the edge and lean your cue back into the grooves. Your cue is now protected from falling if the table gets bumped and is easy to grab when your turn is up. Plus, this holder is compact enough to fit into the pocket of most pool cue cases, you you'll never be without it when you need it. Available in four colors and three sizes.Available Colors
Blue (BL)
Black (BLK)
Green (G)
Purple (PLE)
Also available sized to hold 2 or 4 cues.
5. Q-Claw Cue Rest, Billiards 5 Pool Cues, WINE
Feature
Sits on the edge of the table and holds 2 cues.No fumbling with screws or bolts to use it.
Easily fits in the Large Accessory pocket of your case.
Great for league play - Can be used by your whole team.
Description
Looking for a cue holder that's easily portable, sets up quickly, and won't damage your cue - the Q-Claw is what you need! The Q-Claw is small enough to fit into any almost any case, and the self-weighted design allow for easy set-up. Move from table to table in a matter of seconds! The rubber grip bottom keeps the holder in place, and your cue won't be marred by the wide cue slots - no clips to worry about.6. Extreme EXC-4 Weighted 4-Cue Pool Cue Holder, Blue
Feature
Weighted 4-cue pool cue holderSelf-weighted compact design lays flat on a tabletop - or any horizontal surface
Protects your pool cue from crashing to the ground
Available in 3 sizes: 2-cue, 3-cue and 4-cue
Comes in your choice of 4 colors: blue, black, green and purple
Description
Keep your cues out of harms' way on league night with an Extreme EXC-4 weighted 4-cue pool cue holder. Made to rest on the top of any horizontal surface, this compact plastic self-weighted cue holder will hold your cues + enough quarters to keep your hot streak rolling. Lay the holder on the top of a table with the cue grooves hanging over the edge and lean your cue back into the grooves. Your cue is now protected from falling if the table gets bumped and is easy to grab when your turn is up. Plus, this holder is compact enough to fit into the pocket of most pool cue cases, you you'll never be without it when you need it. Available in four colors and three sizes.Available Colors
Blue (BL)
Black (BLK)
Green (G)
Purple (PLE)
Also available sized to hold 2 or 3 cues.
7. Joe Porper Portable Cue Holder - 4 Clip
Feature
Swivel cue holdersLocks into place
Safely holds 4 pool cues
Made from a heavy-duty black ABS industrial plastic
Clips are made from soft rubber with no sharp edges
Description
This Joe Porper Portable Cue Holder protects 4 cues from getting knocked over or even worse, "borrowed" with Joe Porper's Portable Cue Racks. Just clamp this handy cue holder onto a table and slip cues into molded plastic cue clips that are sturdy, but soft, with no sharp edges to scratch or mar valuable cues. Clips are attached to a plastic base that rotates on an adjustable, extra large 2" clamp. A large thumb screw makes it easy to install in just seconds. Clips rotate into a vertical position so the cue holder fits right in the storage pouch of a Joe Porper cue case. Rotate the clips back and they click into place to hold your cues.8. Iszy Billiards 8 Pool Billiard Stick & Ball Floor Stand with Scorer Finish Cue Rack Only, Mahogany
Feature
8 cue and ball floor rack - holds 8 cues and full set of ballsWith 4 score counters
Rubber rings for cue holes and 4 rubber pads for beverages
Mahogany finish - measurements are 22 1/4"H x 14"W x 14"d
Cues and balls not included - some assembly required
Description
8 cue and ball floor rack - holds 8 cues and full set of balls - with 4 Score counters - rubber rings for cue holes and 4 rubber pads for beverages - Mahogany finish - measurements are 22 1/4"H x 14"W x 14"d - cues and balls not included - some assembly required.9. Cue Rack Only - 6 Pool Cue - Billiard Stick Wall Rack Made of Wood Choose Mahogany, Black or Oak Finish
Feature
6 Pool Cue Rack - Made of wood - Holds 6 cues and a full set of ballsCues, balls and ball racks not included - Some assembly required
Mahogany finish - Mounting hardware included with L bracket
Measurements are 28 1/4"H X 27 1/4"W X 2 3/4"D
Description
6 Pool Cue Rack - Made of wood - Holds 6 cues and a full set of balls - Cues, balls and ball racks not included - Some assembly required - Mahogany finish - Mounting hardware included with L bracket - Measurements are 28 1/4"H X 27 1/4"W X 2 3/4"D10. Portable Pool Cue Holder/Billiard Cue Rack for 3 Cues
Feature
Installs on the edge of the table.A simple outlook and non-slip rear, which its absorption to table's surface smoothly and closely.
Available for 3 cues rack/holder.
Durable rubber for a long-term use, Weight: 420 g, Cue is not included.
We have Black and Blue available in stock, You can contact us about the color you wanted.Without any specified caption on color,we would ship it on random color.
Description
Woods Cues, founded in 1985, a family oriented manufacturer, has been making one of the world's finest cues throughout its history.We have given the industry best quality at a reasonable price.
We own a huge variety of cues constructed from hand spliced butt woods, face splices & veneers while the shafts are selected exquisitely American Ash & Canadian Maple, which are intelligently kiln dried, dehumidified and processed under high standards.
Cue is not included.
Sometimes arrival time of the item may prolong 3 - 5 days due to Customs or Weather factors. Thank you for your understanding.
Recent Comments