The 10 best brake controller mounting bracket
Finding your suitable brake controller mounting bracket is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best brake controller mounting bracket including detail information and customer reviews. Let’s find out which is your favorite one.
1. CURT 51124 Discovery Brake Control Mounting Bracket
Feature
Securely mounts CURT Discovery brake control #51120Controller can be mounted anywhere in the vehicle, at any angle
Slotted screw holes allow for flexible mounting options
Spare bracket allows use of the same controller in multiple vehicles
Description
Discovery is a time-based brake controller, meaning it applies increasing brake pressure the longer your foot is on the brake pedal. It has a digital display for easy monitoring and the ability to manage up to four axles at a time. Discovery mounts at any angle, anywhere in your vehicle and comes with an automatic power level adjustment feature to ensure you can stay better focused on your driving and spend less time worry about your trailer brakes. It is compatible with anti-lock brakes, cruise control and is backed by a limited lifetime warranty.This brake control mounting bracket is designed specifically to fit the CURT Discovery brake control. It features slotted screw holes for flexible mounting on your vehicle dash and comes with four screws for a secure installation.2. CURT 51144 TriFlex Brake Control Mounting Bracket
Feature
Securely mounts CURT Triflex brake control #51140Controller can be mounted at multiple angles
Slotted screw holes allow for flexible mounting options
Spare bracket allows use of the same controller in multiple vehicles
Description
The crown jewel of CURT's brake control lineup is the TriFlex. This proportion-based brake control features a compact size, a digital display and the ability to manage up to eight brakes at a time. The feature that sets the TriFlex apart from all others is its triple-axis motion-sensing accelerometer. This integrated circuit component allows the TriFlex to detect every motion of your vehicle and trailer with exact precision and to then apply the perfect amount of braking power for every situation. The TriFlex also automatically adjusts brake output when going up or down a hill and is compatible with anti-lock brakes and cruise control. It comes with a mounting bracket and hardware and can be mounted at various angles on your vehicle's dash. Best of all, like other CURT brake controls, the TriFlex is protected by a limited lifetime warranty.This brake control mounting bracket is designed specifically to fit the CURT TriFlex brake control. It features slotted screw holes for flexible mounting on your vehicle dash and comes with six screws for a secure installation.3. ESP Truck Accessories 2014-2019 Toyota Tundra Tekonsha P3 Brake Controller Mounting Kit
Feature
Gives your Tundra a factory look installationDescription
***All orders will ship 8/14*** Our Tekonsha P3 Brake Controller Mounting Kit replaces the factory dash panel to the right of the steering column that houses the Tow/Haul and TRAC buttons. We use a factory panel from Toyota and modify it with a custom fit plate that matches the shape of the P3 brake controller. This panel matches the factory dash perfectly as we use a factory panel. Our panel gives easy access to the control panel on the front of the P3 and also the manual control lever on the bottom of the controller. This panel makes the installation easy and makes it look like it was installed at the factory.4. CURT 51114 Venturer Brake Control Mounting Bracket
Feature
Securely mounts CURT Venturer brake control #51114Controller can be mounted anywhere in the vehicle, at any angle
Slotted screw holes allow for flexible mounting options
Spare bracket allows use of the same controller in multiple vehicles
Description
The Venturer is a compact, easy-to-set-up time-based brake controller. It can be mounted at any angle and has an automatic power level adjustment feature. It can operate one to three axles at a time, meaning two to six brakes, and has an LED display for monitoring brake pressure. Venturer is compatible with anti-lock brakes, cruise control and comes with a limited lifetime warranty.This brake control mounting bracket is designed specifically to fit the CURT Venture brake control. It features slotted screw holes for flexible mounting on your vehicle dash and comes with four screws for a secure installation.5. Reese Towpower 74378 Pilot Brake Controller
Feature
Smoke color lens is ideal for direct light applicationCan be mounted upside down and still have a readable display
Protection against short circuit and loss of ground
Mounting bracket included for standard mounting
Lifetime limited warranty
Description
Reese Towpower Pilot Brake Controller has flexible mounting options with a microprocessor that allows you the ability to read the display even when the controller is mounted upside down. Large easy to read dual digital display shows, properly wired control, voltage output to brakes and connection to trailer. Capable of handling up to three axle trailers.6. CURT 51110 Venturer Brake Control
Feature
Increases brake power based on gain setting and sensitivity adjustmentOperates 2-6 trailer brakes at a time (1-3 axles)
No internal moving parts and no leveling required
LED indicator lengthens as controller applies power
Mounts anywhere in the vehicle, at any angle
Description
It takes a lot of power to stop a moving trailer, especially when that trailer is hauling a heavy load. On RVs, flatbeds, livestock trailers and many other oversize haulers, manufacturers typically install trailer brakes to assist the tow vehicle in bringing such a massive amount of weight to a halt. But it takes more than a good set of brakes to make quick, efficient stops. It takes precision and the right amount of control. The Venturer is a compact, easy-to-set-up time-based brake controller. It can be mounted at any angle and has an automatic power level adjustment feature. It can operate one to three axles at a time, meaning two to six brakes, and has an LED display for monitoring brake pressure. Venturer is compatible with anti-lock brakes, cruise control and comes with a limited lifetime warranty. All CURT brake controls are designed to work with quick plugs so that they can readily plug into your vehicle's original equipment socket. They also include a mounting bracket and hardware for easy installation. A brake controller should be mounted somewhere on the dash of your vehicle, and we recommend putting it below the steering wheel, either on the right or left side of the steering column. This way the control will not block your view when driving, but it will remain accessible and visible when adjustment is needed.7. Reese Towpower 8508700 Compact IQ Brake Control, 1 Pack
Feature
Boost option to allow additional braking power when towing heavier loadsLED indicator to continuously check the electrical circuit to ensure it is in sync and active
In-dash mounting for a less-intrusive appearance
Compatible with 1-, 2- or 3-axle trailers
Easy to install
Description
The REESE Towpower's Compact IQ professional-grade brake controller helps alleviate the stress placed on a vehicle when towing heavy loads. The controller offers advanced proportional braking by applying just the right amount of brake pressure needed to match the vehicle's deceleration rate.8. CURT 51120 Discovery Brake Control
Feature
Increases brake power based on gain setting and sensitivity adjustmentOperates 2-8 trailer brakes at a time (1-4 axles)
No internal moving parts and no leveling required
Digital display shows power adjustments in 0.1 increments
Mounts anywhere in the vehicle, at any angle
Description
It takes a lot of power to stop a moving trailer, especially when that trailer is hauling a heavy load. On RVs, flatbeds, livestock trailers and many other oversize haulers, manufacturers typically install trailer brakes to assist the tow vehicle in bringing such a massive amount of weight to a halt. But it takes more than a good set of brakes to make quick, efficient stops. It takes precision and the right amount of control. Discovery is a time-based brake controller, meaning it applies increasing brake pressure the longer your foot is on the brake pedal. This pressure is based on the gain setting and sensitivity adjustment set by the user. Discovery has a digital display for easy monitoring and the ability to manage up to four axles at a time. It mounts at any angle, anywhere in your vehicle and comes with an automatic power level adjustment feature to ensure you can stay better focused on your driving and spend less time worry about your trailer brakes. It is also compatible with anti-lock brakes, cruise control and is backed by a limited lifetime warranty. All CURT brake controls are designed to work with quick plugs so that they can readily plug into your vehicle's original equipment socket. They also include a mounting bracket and hardware for easy installation. A brake controller should be mounted somewhere on the dash of your vehicle, and we recommend putting it below the steering wheel, either on the right or left side of the steering column. This way the control will not block your view when driving, but it will remain accessible and visible when adjustment is needed.9. CURT 51140 TriFlex Brake Control
Feature
Triple-axis, motion-sensing accelerometer for highly responsive, smooth stopsThird axis provides dynamic power adjustments when going up or down a hill
Nine levels of sensitivity adjustment for varying loads or driving conditions
User-selectable power output and trailer brake light activation
Automatic leveling and calibration eliminate setup requirements
Description
It takes a lot of power to stop a moving trailer, especially when that trailer is hauling a heavy load. On RVs, flatbeds, livestock trailers and many other oversize haulers, manufacturers typically install trailer brakes to assist the tow vehicle in bringing such a massive amount of weight to a halt. But it takes more than a good set of brakes to make quick, efficient stops. It takes precision and the right amount of control.The crown jewel of CURT's brake control lineup is the TriFlex. This proportion-based brake control features a compact size, a digital display and the ability to manage up to eight brakes at a time. The feature that sets the TriFlex apart from all others is its triple-axis motion-sensing accelerometer. This integrated circuit component allows the TriFlex to detect every motion of your vehicle and trailer with exact precision and to then apply the perfect amount of braking power for every situation. The TriFlex also automatically adjusts brake output when going up or down a hill and is compatible with anti-lock brakes and cruise control. It comes with a mounting bracket and hardware and can be mounted at various angles on your vehicle's dash. Best of all, like other CURT brake controls, the TriFlex is protected by a limited lifetime warranty.All CURT brake controls are designed to work with quick plugs so that they can readily plug into your vehicle's original equipment socket. They also include a mounting bracket and hardware for easy installation. A brake controller should be mounted somewhere on the dash of your vehicle, and we recommend putting it below the steering wheel, either on the right or left side of the steering column. This way the control will not block your view when driving, but it will remain accessible and visible when adjustment is needed.10. Mesllin White Amber Emergency LED Strobe Light Bar, 40w/set 6 inch Car DC 12V On Off Switch + Adjustable Mounting Bracket
Feature
8 selectable flash patterns, solid and split-color models are available with last pattern memory recall function, easy to operate by using the controller along with power cord.Super Bright: High intensity LED Chips optical lens, driving at night can be seen clearly light beam with meteor-like brightness.
Ultra slim, super bright with surface mount. Low-profile design with brackets and mounting screws, suitable for external and/or internal mounting applications, widely used as grill warning lights, bumper lights, dash lights, rear deck lights and more.
Durable, Waterproof, Vibration Resistant. Ideal for emergency, repair / escort vehicles and road onstruction.
3 wires connection: Black for Negative, Red for Positive and Yellow for Brake Light Negative.
Description
Specification:Light Color:White and Amber
Flash Patterns: 8
Operating Voltage: 12 DC
Material: PC + Aluminum
Source:COB
Light Power:20W/section,40W/Set
Current:2A
Size of bulb:6.29*1.18*1.97inch(approx.)
Package list: 1 set (2pcs) Strobe light
Features:
Ultra slim, super bright with surface mount.
Anti-collision, anti-dust and splash-proof.
8 different flashing patterns, Last pattern memory recall.
Low power consumption, quick instant start-up time.
No pollution, no noise, no electronic interference and more efficient.
Universal fit all Cars SUV vans and trucks with DC 12V-24V.
Only if you connect the light to the brake light that can have strobe light patterns.
Professional installation is highly recommended.
Recent Comments