The 10 best hinge spring 2022
Finding the best hinge spring suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
1. Prime-Line KC10HD Safety Spring Door Closer Easy to Install to Convert Hinged Doors to Self-Closing Diecast Construction (4-1/4 White, Non-Handed)
Feature
INCLUDES - (1) Surface mounted spring-loaded door closer; works on doors up to 150 lbs; non-handed; adjustable tension; U.L. listed; 1/2 hour fire rated.EASY DIY PROJECT - Thanks to these KC10HD safety spring door closers, your next to-do is quick and easy. Use these door closers to convert hinged doors to self-closing ones.
EASY INSTALLATION - With a closer and plastic slide plate being surface mounted, installation is a breeze. This spring door closer can be used on doors up to 150 lbs and can be used on both left and right-handed doors. Easily adjust the tension on this safety spring door closer.
INSTALLATION NOTES - To prevent over-tensioning, adjust closer one quarter turn at a time and test door after each adjustment. Over-tensioning can cause spring to buckle. If you wish to add additional lubricant to unit, carefully disassemble unit after relieving tension and apply white lithium grease directly to the springs.
PRODUCT INFO - This safety spring door closer features a non-handed design and White painted finish to complement any style door. 1" wide base, 4-1/4" hole center spacing and 4-3/4" arm.
Description
Convert your hinged door into a self-closing one with the KC10HD Safety Spring Door Closer. Installation is a breeze thanks to the closer and plastic slide plate being surface mounted within minutes you can have a self-closing door! Use this spring door closer on doors up to 150 lbs. It can also be used on both left and right-handed doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. They are U.L. listed with a hour fire rating and have a 1 wide base, 4-1/4 hole center spacing and 4-3/4 arm. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the doors distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, brown, chrome plated and satin chrome plated. Be sure to view the manufacturers How-To Installation Video also linked to this page, in the upper left hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease.2. Deltana DSH35R515 Single Action Steel 3 1/2-Inch x 3 1/2-Inch x 5/8-Inch Spring Hinge
Feature
Steel 3 1/2"x 3 1/2"x 5/8" Spring Hinge Single ActionTension hex wrench, straight wrench, locking pin and steel screw
Available in an array of fine finishes
Description
DSH35R515 Finish: Brushed Nickel Features: -Material: Steel. -Tension hex wrench, straight wrench, locking pin and steel screw. -Available in an array of fine finishes. Hinge Type: -Spring. Number of Mounting Holes: -6. Style: -Contemporary. Dimensions: Overall Height - Top to Bottom: -3.5". Overall Width - Side to Side: -3.5". Overall Depth - Front to Back: -0.09". Overall Product Weight: -1.1 lbs.3. Deltana DSH4R5TT4 Single Action Steel 4-Inch x 4-Inch x 5/8-Inch x Sq Spring Hinge
Feature
Steel 4"x 4"x 5/8"x SQ Spring Hinge Single ActionTension hex wrench, straight wrench, locking pin and steel screw
Available in an array of fine finishes
Description
Deltana has a proven record for exceptional service and quality and is the architectural hardware manufacturer with the largest inventory selection of architectural and door hardware in America. With an array of fine finishes, finding hinges, bolts, bumpers & stops, ball catch, roller latch, door accessories and home accessories which compliment your homes decor.4. National Hardware N343-475 DPV879 Self-Closing Gate Kit in Black
Feature
Designed for surface applications on doors, gates and shedsKit includes:1 - Gate latch, 2 - Gate hinges, Mounting fasteners, Adjusting tool for spring hinges
Self-closing latch is easily released from either side
For patio and garden gates and shed doors
Manufactured from steel
Description
Stanley-National Hardware has been a leading manufacturer of hardware for more than a century. Over the course of the last 160-plus years, Stanley-National is a name that has become synonymous with quality, innovation, and customer service. A top quality line of gate hardware designed for long life and maintenance free operation. Smooth Black with excellent corrosion resistance because they are triple-protected with zinc-plate, black chromate dip and black baked on enamel finish.5. Deltana DSH44U15 Single Action Steel 4-Inch x 4-Inch Spring Hinge
Feature
Steel 4"x 4" Spring Hinge Single ActionTension hex wrench, straight wrench, locking pin and steel screw
Available in an array of fine finishes
Description
Deltana has a proven record for exceptional service and quality and is the architectural hardware manufacturer with the largest inventory selection of architectural and door hardware in America. With an array of fine finishes, finding hinges, bolts, bumpers & stops, ball catch, roller latch, door accessories and home accessories which compliment your homes decor.6. AES Industries Door Spring Compressor Tool For GM Cars and Light Trucks
Feature
Safely and easily compresses door hinge springs for quick removal and installation.Deep reach designed to service GM cars and trucks.
Center tightening screw can be used with a 1/2" socket or wrench.
7. Trans Atlantic DH-TAN5005-GV Double Acting Spring Hinge (Set of 2), 5", Galvanneal
Feature
ANSI A81071F certifiedCommercial: standard weight
Similar to Bommer Type "big barrel" hinges
Packed with wood and machine screws
Sold in pairs
Description
The Trans Atlantic 5 inch double acting spring hinge is made to strict specifications for exceptional quality. These hinges are recommended for use when automatic self closing of a door is required. Double acting spring hinges are also used for doors that need to open in both directions and return automatically to center such as cafe doors.8. ABN Automotive Door Hinge Coil Spring Compressor Clamp Heavy-Duty Tool for GM Vehicles Small GM Car to Light GM Truck
Feature
Practical: Use the ABN Automotive Door Hinge Coil Spring Compressor Clamp Heavy-Duty Tool for GM Vehicles - Small GM Car to Light GM Truck to quickly install or remove a door hinge on your GM vehicleSafe: A user can easily and safely compress door springs for fast installation or removal
Deep Reach Design: Allows for the service of GM B-Body style cars and trucks with less hassle
Center Tightening Screw: Use a -inch socket or wrench to tighten the center screw
Durable: Constructed from alloy steel for a strong, long-lasting tool that will work use after use
Description
Working on door hinge springs can be a dangerous job. Whether you're installing or removing a door hinge in your home garage or a professional mechanic shop, you want to ensure your safety. The ABN Automotive Door Hinge Coil Spring Compressor Clamp Heavy-Duty Tool for GM Vehicles - Small GM Car to Light GM Truck is the safest tool when removing and installing door hinge springs. A professional or DIYer can safely work on door hinge springs on GM cars and light trucks. The deep reach design allows for the service of GM cars and trucks with GM B-Body styles that are normally tricky to reach. Simply use a 1/2-inch socket or wrench to tighten the center screw. This tool is constructed with alloy steel for strength and longevity that will allow you to work with this tool use after use. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.9. Richelieu Hardware - 810FBB - Box of 2 - Double Action Spring Hinge - Automatic Hinge Swings Door in Both Directions. - Black Finish
Feature
Height- overall Dimensions: 3 3/4 inSafe working load: 15 lbs
Corner Type: automatic hinge swings door in both directions
Pin: non-removable pin
Screw/nail: included
Description
Add the finishing touch to your project with our variety of butt hinges. Available in many trendy finishes, it surely suits any design! for door thicknesses from 3/4" to 1/3/8". door height 7'0''. 30 lb (13.6 kg) door requires 2 hinges. 38 lb (15.9 kg) door requires 3 hinges.10. Shepherd Hardware 9785 4-Inch Spring Loaded Gate Caster, 125-lb Load Capacity
Feature
Designed to allow gates to open and close freely by automatically adjusting height on uneven groundSpring-loaded clamp acts as a shock absorber when caster is rolling over uneven or rough surfaces
Hard rubber wheel and metal caster stem, 125 lb. load rating
Universal mounting system for wood or metal gates
Caster swivels to easily change direction and navigate difficult terrain
Recent Comments