The 10 best leg daddy 2022
Finding the best leg daddy suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
1. Leg Daddy 4" Walnut Finish Square Tapered Wooden Sofa Legs, Set of 4
Feature
Height (incl. glide): 4"Top Width: 3 7/8"
Bottom Width: 3"
Material Type: Wood
LIFETIME SERVICE POLICY
Description
LEG DADDY is a registered trademark of Homeplace Group, Inc.
The Importance of Good Sofa Legs
Your entire sofa, couch, chair, ottoman and other furniture pieces rest on the leg. If the leg is loose or defective, the result can be an uncomfortable use of the furniture or structural damage to the furniture item because of uneven stress loads being placed on the frame. It is important, not only for appearance sake, but also for the well being of your furniture to keep the legs in good repair.
The Leg Daddy 4" Walnut Finish Square Tapered Wooden Sofa Legg
This leg is attached to the furniture item with a 5/16" hanger bolt. Attachment and removal of the leg is easy. The leg is simply turned to the right to install and to the left to remove. This wooden leg is beautifully finished in a walnut finish which highlights the grain beautifully. The wood is strong and durable and is equipped with a plastic glide on the bottom of the leg
Special Note
There are three available sizes of Hanger Bolts. Please carefully check the hanger bolt size on your present leg to assure that your new legs will be compatible. The 5/16" bolt is the most common size, especially in American-Made furniture. M8 (or 8mm) bolts are typically seen in IKEA furniture and some other imported items, while M10 (10mm) is seen in other European imports (Natuzzi, etc.) The three sizes of hanger bolts are NOT cross-compatible, so please check carefully before ordering. M8 and 5/16 look almost the same, so be sure to check the fit with a bolt or nut, and not just with a tape measure.
Variation in Color and Grain of Wood Furniture Legs
Please note that wood is a naturally sourced material, with naturally-occurring variations in color, texture, and grain pattern. As a result, each couch leg may differ slightly from the photograph shown on the website.
HPG Ltd. Lifetime Service Policy
2. Leg Daddy 4" Dark Finish Square Tapered Pyramid Wooden Sofa Legs, Set of 4, 5/16" Hanger Bolt
Feature
Height: 4", Top Width: 3 3/4", Bottom Width: 2 1/2"Hanger Bolt: 5/16" - Make sure to measure your attachment point! Unsure of what size hanger bolt you need? Consider purchasing a Leg Daddy Hanger Bolt Fit Test Kit
Raise the height of your sofa or change the style by replacing the legs.
Hardwood with Dark Cherry Finish. Plastic glide on the bottom protects hard floors.
Leg Daddy legs aren't just for sofas! Chairs, Love seats, and ottomans all have legs on them as well
Description
Our sofa legs are not just for the sofa. They also fit well and look well on chairs, ottomans, and other furniture items.The Importance of Good Sofa LegsYour entire sofa, chair, ottoman and other furniture pieces rest on the leg. If the leg is loose or otherwise defective, the result can be an uncomfortable use of the furniture. Defective legs can lead to structural damage to the furniture item because of uneven stress loads being placed on the frame. It is important, not only for appearance sake, but also for the well being of your furniture to keep the legs in good repair.
The Leg Daddy 4" Dark Finish Tapered Pyramid Sofa Leg This leg is attached to the furniture item with a 5/16" hanger bolt. Attachment and removal of the leg is easy. The leg is simply turned to the right to install and to the left to remove. This wooden leg is beautifully finished in a Dark Walnut finish which highlights the grain beautifully. The wood is strong and durable and is equipped with a plastic glide on the bottom of the leg.
Special Note Please be advised that there are two common sizes of Hanger Bolts. The most common size hanger bolt for American-Made furniture is 5/16". For imported furniture, especially from Europe (IKEA, Natuzzi, etc.), the larger Metric 10mm (M10) size is common. These sofa legs are NOT compatible with M10 attachment points.
Variation in Color and Grain of Wood Furniture Legs Please note that wood is a naturally sourced material, with naturally-occurring variations in color, texture, and grain pattern. As a result, each couch leg may differ slightly from the photograph shown on the website.
LEG DADDY is a registered trademark of Homeplace Group, Inc.
3. Leg Daddy 4" Round Tapered Plastic Sofa, Couch, and Chair Legs, Set of 4
Feature
Height: 4" - Top Width: 2" - Bottom Width: 1-3/4"Industry Standard 5/16" Diameter Hanger Bolt Pre-Installed
Made of High-Density, Heavy Duty Plastic
Attractive Brown Color and Wood-Grain Pattern
LIFETIME SERVICE POLICY
Description
LEG DADDY is a registered trademark of Homeplace Group, Inc.Sofa, couch, or chair legs can get really worn, scratched and dated. An inexpensive leg replacement can update and revitalize your room.
Make getting in and out of your couch, chair, sofa, or loveseat easier by adding taller legs to raise the height of the sofa. These standard legs are made from High Density Polyethylene (HDPE) and are 5" tall for easy replacements on most sofas, chairs, couches and furniture.
A 5/16" hanger bolt is pre-installed (as shown in the picture) and is the most common size, fitting most couches or sofa frames. (Some imported furniture from Europe and Asia have a slightly larger 10mm - also called M10 - attachment point. Please double-check compatability before ordering.)
HPG Ltd. Lifetime Service Policy
Our Ltd. Lifetime Policy runs from the original date of purchase and covers the repair of manufacturing defects or replacement of your purchased product. Item must be clean and free of stains or damage. Transportation charges and a Policy Service Fee are the responsibility of the consumer. To email your clear images of the issue go to the Homeplace Group's storefront for our contact information. Then you will receive information on the next steps and/or additional information on this policy.
4. 8" Pyramid Style Wooden Furniture Feet (Set 0f 4)
Feature
Square Tapered Wooden Furniture LegsSolid Wood Sofa, Loveseat, Chair Replacement Legs
Walnut stain
Malaysian Rubber Wood
Set of 4 legs
Description
3" Square on top, 8" height, 2" at the bottom. 5/16" hanger bolt standard size.5. 3" Wood Sofa/Chair/Ottoman Tapered Leg Walnut Finish Threaded 5/16" Bolt - Set of 4
Feature
Height: 3"Top of Leg: 4" x 4"
Bottom of Leg: 3" x 3"
5/16" Threaded Bolt Size
Set of 4
Description
Set of 4 Legs, Malaysian Rubber Wood. Please Note: Photograph depicts finished color pretty accurately, finish is considered "walnut" however some manufacturers consider this color finish "medium cherry".6. Sofa Legs, GLTECK Tapered Plastic Sofa Couch and Chair Legs M8 Thread (Metric 8mm) Replacement Furniture Legs- Set of 4 with Leg Mounting Plates, Perfect for IKEA Or US Made Furniture and Beds.
Feature
Height: 4.7'' (12cm), Top Width:2.3''(6cm), Bottom Width:1.5'' (4cm). 5/16'' Diameter Pre-Installed Hanger Bolt.IMPORTANT: Please Check the Bolt Size You Need Before Buying.
The Sofa Legs: Beautiful Black Color Wood-Grain Pattern Goes with Any Decor, Perfect For Sofa Riser Giving You More Storage Space Under Your Furniture.
Made with Super Strong HDPE (High Density Polyethylene), Heavy Duty Plastic Can Extend The Service Life Than Wood For Daily Use.
Package Includes 4 x Sofa Legs with M8 Hanger Bolt, 4 x M8 Thread (Metric 8mm) Leg Mounting Plates and 18 x Screws for Plates Install.
Description
IMPORTANT: A 5/16" hanger bolt is pre-installed (as shown in the picture) and is the most common size, fitting most couches or sofa frames. (Some imported furniture from Europe and Asia have a slightly larger 10mm - also called M10 - attachment point. Please double-check compatability before ordering.)
>
>This Furniture Legs Set isn't Only for Sofas, But Also Perfect for Easily Install Couch, Chairs, Love Seats, Beds, Ottomans And Other DIY Furniture, IKEA Hacks OR U.S Made Furniture
Replace damaged sofa or couch legs, Raise the height of your sofa or change the style by replacing the legs, make your room tidy and warm
- Classic color and design, supper quality affordable tapered furniture leg
- Easy screw in install, lightweight and strong furniture risers, bed risers or sofa risers
- Perfect for furniture hackers and DIY furniture or U.S made furniture
The package Including:
- 4 Soft legs: Compatible with the IKEA furniture M8 8mm OR U.S made Furniture
- 4 Leg Mounting Plates: Universal converter T-plate for US furniture
-18 Screws for mounting plates install
PLEASE NOTE - The mounting bolt that screws into the sofa, on this model is the M8 or 8mm and compatible with IKEA and Natuzzi. If your furniture does not have the M8 fitting, simply use the included T-plate attachment plates.
100% lifetime money back or replace a new one guarantee if you are not satisfied with this product
7. Leg Daddy 5 1/2" Walnut Tapered Pyramid Sofa Leg, Set of 4
Feature
Height: 5 1/2"Top Width: 2 3/4"
Bottom Width: 1 3/4"
Set of 4 Legs
LIFETIME SERVICE POLICY
Description
The Leg Daddy 5 1/2" Walnut Tapered Pyramid Sofa LegThis leg is attached to the furniture item with a 5/16" hanger bolt. Attachment and removal of the leg is easy. The leg is simply turned to the right to install and to the left to remove. This wooden leg is beautifully finished in a Dark Walnut finish which highlights the grain beautifully. The wood is strong and durable and is equipped with a plastic glide on the bottom of the leg.
Special Note
Please be advised that there are two common sizes of Hanger Bolts. Please carefully check the hanger bolt size on your present leg to assure that your new legs will be compatible. Both your present leg and your new leg need to have the same size hanger bolt. The Hanger Bolt on this leg is 5/16".
The most common size hanger bolt for American-Made furniture is 5/16". For imported furniture, especially from Europe (IKEA, Natuzzi, etc.), the larger Metric 10mm (M10) size is common. These sofa legs are NOT compatible with M10 attachment points.
Variation in Color and Grain of Wood Furniture Legs
Please note that wood is a naturally sourced material, with naturally-occurring variations in color, texture, and grain pattern. As a result, each couch leg may differ slightly from the photograph shown on the website.
8. Leg Daddy 6" Medium Finish Square Tapered Sofa Legs (4)
Feature
Height (incl. glide): 6"Top Width: 3 6/16" Bottom Width: 2 5/16"
Material Type: Hardwood with Medium Walnut finish and plastic glide on bottom
Hanger Bolt: 5/16" Standard Size (Please make sure to measure attachment point, T-plates may be needed for M10 connections)
Unsure of what size hanger bolt you need? Consider purchasing a Leg Daddy Hanger Bolt Fit Test Kit
Description
Sold as Set of 2 or 4LEG DADDY is a registered trademark of Homeplace Group, Inc. Our sofa legs are not just for the sofa. They also fit well and look well on chairs, ottomans, and other furniture items. The Importance of Good Sofa Legs Your entire sofa, chair, ottoman and other furniture pieces rest on the leg. If the leg is loose or otherwise defective, the result can be an uncomfortable use of the furniture. Defective legs can lead to structural damage to the furniture item because of uneven stress loads being placed on the frame. It is important, not only for appearance sake, but also for the well being of your furniture to keep the legs in good repair.
This leg is attached to the furniture item with a 5/16" hanger bolt. Attachment and removal of the leg is easy. The leg is simply turned to the right to install and to the left to remove. This wooden leg is beautifully finished in a Medium Walnut finish which highlights the grain beautifully. The wood is strong and durable and is equipped with a plastic glide on the bottom of the leg. Special Note Please be advised that there are two common sizes of Hanger Bolts. Please carefully check the hanger bolt size on your present leg to assure that your new legs will be compatible. Both your present leg and your new leg need to have the same size hanger bolt. The Hanger Bolt on this leg is 5/16". The most common size hanger bolt for American-Made furniture is 5/16". For imported furniture, especially from Europe (IKEA, Natuzzi, etc.), the larger Metric 10mm (M10) size is common. These sofa legs are NOT compatible with M10 attachment points. T-Nuts can be purchased to fit M10 attachments. Variation in Color and Grain of Wood Furniture Legs Please note that wood is a naturally sourced material, with naturally-occurring variations in color, texture, and grain pattern. As a result, each couch leg may differ slightly from the photograph shown on the website.
9. Leg Daddy 2 1/2 Inch Unfinished Curved Sofa Leg, Set of 2
Feature
Height: 2 1/2 inchesTop Width: 3 inches x 1 1/2 inches
Bottom Width: 2 1/4 inches x 1 3/4 inches
Material Type: Hardwood
Item: 404*1000371-U
Description
Sofa, couch, or chair legs can get really worn, scratched, and dated. An inexpensive leg replacement can update and revitalize your furniture and room. Give your sofa, couch, or chair a new look at a budget price. Add impact or update an old sofa just by changing the style of the legs. These Leg Daddy Sofa Legs mount with screws, so they easily attach to your sofa, couch, chair, ottoman, or loveseat and replace your existing legs or feet. For your convenience, we include a set of mounting screws. Installing screw-mounted sofa legs is easy with the supplied screws and even easier if you are using a portable screw gun. Just a matter of turning over the sofa (do not do that alone), removing the old legs, and screwing in the new legs. Screw mount legs come with pre-drilled holes for the included 3 inch long screws, to facilitate mounting. Dimensions listed above under Product Features are approximate.10. Leg Daddy 1 1/2 Brown Round HDPE Plastic Sofa Leg, Set of 4 by Leg Daddy
Recent Comments