The 10 best lowering springs mitsubishi lancer
Finding your suitable lowering springs mitsubishi lancer is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best lowering springs mitsubishi lancer including detail information and customer reviews. Let’s find out which is your favorite one.
1. For Mitsubishi Lancer Suspension Lowering Spring (White) - CS9W
Feature
Improves handling, responses and balanceLowers the center of gravity to improve performance and increases stability
Reduces squat during acceleration, body roll at corners and excessive nose-dive under braking
Constructed of SAE 9254 chromed cold wounded steel and powder-coated silicon color polished finish for maximum durability
Drop Rate - FRONT: 1.50", REAR: 1.50"
Description
The chassis of a street vehicle is designed to be built at a minimum cost; thus, suits only average drivers. As tuners we are anything but average. We know what we want from a vehicle. We want immediate response, reduced body roll, increased stability and enhanced cornering ability. Lowering springs are the basis of achieving those characteristics in our street machines. By lowering the center of gravity, a vehicle will be able to turn harder while reducing body roll. A lower ride height also gives the vehicle a more aggressive look.Package Included:
Compatible with:
2. Tein SKE20-AUB00 S.Tech Lowering Spring for Mitsubishi Lancer
Feature
Front spring rate: 3.8 kilogram/millimeter (212 pound/inch)Rear spring rate: 2.5 kilogram/millimeter (162 pound/inch)
Front ride height (may vary with vehicles that share the same fitment): -45 millimeter (-1.8 inch)
Rear ride height (may vary with various vehicles that share the same fitment): -37 millimeter (-1.5 inch)
Progressive spring rate design
Description
Tein S.Tech Springs are an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop on average for a more aggressive appearance and increased road holding capability. Designed to be used with OEM or OEM replacement shocks. Each application is road tested in North America for the proper balance between performance and comfort. Comes with a 1 year limited warranty, spring length is guaranteed not to sag more than 5mm, and be clear of any manufacturer defects. Additional features: Chrome Vanadium SAE9254V construction, Progressive spring rate design, Includes silencer rubber on certain applications, Green Powder coat finish, Developed to be used in conjunction with OEM or OEM replacement dampers, 1-year manufacturers defect and sag warranty (Covers over 5mm sag, breakage, deformity, and noise. Does not cover powder coat finish and rusting.) Contents of Spring Kit: Individual springs x 4, main spring x 4, some applications include Tein silencer rubbers, warranty Information and bump stop reference guide, and 2 Tein decals.3. Swift 4M017R Spec-R Sport Lowering Springs for 05-07 Mitsubishi Lancer EVO 8 9 MR
Feature
Part Number: 4M017RPrice includes set of 4 Springs - 2 Front, 2 Rear.
Made in Japan
Description
Swift made Sport Springs keeps the quality ride you get from the showroom, and adds improved handling and lower ride height for driving enthusiasts and style minded drivers who demand only the best.
From HPDE events to SCCA competition, Swift Spec-R Sport Springs are made for the track enthusiast looking to take their vehicle to the next level.
Features:
Front Drop: -1.4inch
Rear Drop: -.8inch
Swift Spec-R Sport Springs were engineered with 3 characteristics in mind.
Modified ride height compared to Sport Springs to maximize optimal suspension geometry.
Further increasing the spring rate to enhance overall performance. The increase in spring rate is based on the upper limits of the vehicles factory shock valving.
Maintaining optimal comfort level for street use.
Spec R springs are wound with the same engineering and material as our sports springs. With the exception of stiffer rates and slight change in ride height; you can expect the same characteristics as our sports springs.
4. Tein SKE18-AUB00 S.Tech Lowering Spring for Mitsubishi Lancer Evolution X
Feature
Front spring rate: 4.2 kilogram per millimeter (235 pounds per inch)Rear spring rate: 3.8 kilogram per millimeter (179 pounds per inch)
Front ride height: -35 millimeter (-1.4 inch)
Rear ride height: -25 millimeter (-1 inch)
Progressive spring rate design
Description
Tein S.Tech springs are an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop on average for a more aggressive appearance and increased road holding capability. Designed to be used with OEM or OEM replacement shocks. Each application is road tested in North America for the proper balance between performance and comfort. Comes with a 1 year limited warranty, spring length is guaranteed not to sag more than 5 millimeter, and be clear of any manufacturer defects. Additional features: Chrome vanadium SAE9254V construction, progressive spring rate design, includes silencer rubber on certain applications, green powder coat finish, Developed to be used in conjunction with OEM or OEM replacement dampers, 1-year manufacturers defect and sag warranty (Covers over 5 millimeter sag, breakage, deformity, and noise. Does not cover powder coat finish and rusting). Contents of spring kit: Individual spring x 4, main spring x 4, some applications include Tein silencer rubbers, warranty information and bump stop reference guide and 2 Tein decals.5. Tein SKE32-AUB00 S.Tech Lowering Spring for Mitsubishi Lancer Ralliart
Feature
Front spring rate: 3.9 kilogram per millimeter (219 pounds per inch)Rear spring rate: 2.8 kilogram per millimeter (291 pounds per inch)
Front ride height: -55 millimeter (-2.2 inch)
Rear ride height: -45 millimeter (-1.8 inch)
Progressive spring rate design
Description
Tein S.Tech springs are an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop on average for a more aggressive appearance and increased road holding capability. Designed to be used with OEM or OEM replacement shocks. Each application is road tested in North America for the proper balance between performance and comfort. Comes with a 1 year limited warranty, spring length is guaranteed not to sag more than 5 millimeter, and be clear of any manufacturer defects. Additional features: Chrome vanadium SAE9254V construction, progressive spring rate design, includes silencer rubber on certain applications, green powder coat finish, Developed to be used in conjunction with OEM or OEM replacement dampers, 1-year manufacturers defect and sag warranty (Covers over 5 millimeter sag, breakage, deformity, and noise. Does not cover powder coat finish and rusting). Contents of spring kit: Individual spring x 4, main spring x 4, some applications include Tein silencer rubbers, warranty information and bump stop reference guide and 2 Tein decals.6. Tein SKR94-AUB00 S.Tech Lowering Spring for Mitsubishi Lancer Evolution
Feature
Front spring rate: 3.8 kilogram per millimeter (213 pounds per inch)Rear spring rate: 5.2 kilogram per millimeter (280 pounds per inch)
Front ride height: -45 millimeter (-1.8 inch)
Rear ride height: -20 millimeter (-0.8 inch)
Progressive spring rate design
Description
Tein S.Tech springs are an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop on average for a more aggressive appearance and increased road holding capability. Designed to be used with OEM or OEM replacement shocks. Each application is road tested in North America for the proper balance between performance and comfort. Comes with a 1 year limited warranty, spring length is guaranteed not to sag more than 5 millimeter, and be clear of any manufacturer defects. Additional features: Chrome vanadium SAE9254V construction, progressive spring rate design, includes silencer rubber on certain applications, green powder coat finish, Developed to be used in conjunction with OEM or OEM replacement dampers, 1-year manufacturers defect and sag warranty (Covers over 5 millimeter sag, breakage, deformity, and noise. Does not cover powder coat finish and rusting). Contents of spring kit: Individual spring x 4, main spring x 4, some applications include Tein silencer rubbers, warranty information and bump stop reference guide and 2 Tein decals.7. Tein SKR66-AUB00 S.Tech Lowering Spring for Mitsubishi Lancer
Feature
Front spring rate: 3.9 kilogram per millimeter (219 pounds per inch)Rear spring rate: 2.8 kilogram per millimeter (157 pounds per inch)
Front ride height: -29 millimeter (-1.1 inch)
Rear ride height: -4 millimeter (-0.2 inch)
Progressive spring rate design
Description
Tein S.Tech springs are an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop on average for a more aggressive appearance and increased road holding capability. Designed to be used with OEM or OEM replacement shocks. Each application is road tested in North America for the proper balance between performance and comfort. Comes with a 1 year limited warranty, spring length is guaranteed not to sag more than 5 millimeter, and be clear of any manufacturer defects. Additional features: Chrome vanadium SAE9254V construction, progressive spring rate design, includes silencer rubber on certain applications, green powder coat finish, Developed to be used in conjunction with OEM or OEM replacement dampers, 1-year manufacturers defect and sag warranty (Covers over 5 millimeter sag, breakage, deformity, and noise. Does not cover powder coat finish and rusting). Contents of spring kit: Individual spring x 4, main spring x 4, some applications include Tein silencer rubbers, warranty information and bump stop reference guide and 2 Tein decals.8. DNA Motoring For Mitsubishi Lancer ES 4-Door Shock Absorbers (Black)+Lowering Spring (White)
Feature
Reduce the Effect of Traveling Over Rough GroundLowers the Center of Gravity to Improve Performance and Increases Stability
Reduces Squat During Acceleration, Body Roll at Corners and Excessive Nose-Dive Under Braking
Improves Handling, Responses and Balance
Lowering Rate: Front - 1.5" and Rear - 1.5" / Spring Rate: Front - 255 lbs/in and Rear - 155 lbs/in
Description
Shock Absorber:A shock absorber is a mechanical device designed to smooth out or damp shock impulse, and convert kinetic energy to another form of energy. It is used in conjunction with cushions and springs. An automobile shock absorber contains spring-loaded check valves and orifices to control the flow of oil through an internal piston.
One design consideration, when designing or choosing a shock absorber, is where that energy will go. In most shock absorbers, energy is converted to heat inside the viscous fluid. In hydraulic cylinders, the hydraulic fluid heats up, while in air cylinders, the hot air is usually exhausted to the atmosphere. In other types of shock absorbers, such as electromagnetic types, the dissipated energy can be stored and used later. Shock absorbers help cushion vehicles on uneven roads.
Lowering Spring:
The chassis of a street vehicle is designed to be built at a minimum cost; thus, suits only average drivers. As tuners we are anything but average. We know what we want from a vehicle. We want immediate response, reduced body roll, increased stability and enhanced cornering ability. Lowering springs are the basis of achieving those characteristics in our street machines. By lowering the center of gravity, a vehicle will be able to turn harder while reducing body roll. A lower ride height also gives the vehicle a more aggressive look.
Package Included:
Compatible with:
Notes:
9. Swift 4M020R Spec-R Sport Lowering Springs for 2008+ Mitsubishi LANCER EVO X 10
Feature
Part Number: 4M020RPrice includes set of 4 Springs - 2 Front, 2 Rear.
Made in Japan
Description
Swift made Sport Springs keeps the quality ride you get from the showroom, and adds improved handling and lower ride height for driving enthusiasts and style minded drivers who demand only the best.
From HPDE events to SCCA competition, Swift Spec-R Sport Springs are made for the track enthusiast looking to take their vehicle to the next level.
Features:
Front Drop: -1.3 inch
Rear Drop: -1.0 inch
Swift Spec-R Sport Springs were engineered with 3 characteristics in mind.
Modified ride height compared to Sport Springs to maximize optimal suspension geometry.
Further increasing the spring rate to enhance overall performance. The increase in spring rate is based on the upper limits of the vehicles factory shock valving.
Maintaining optimal comfort level for street use.
Spec R springs are wound with the same engineering and material as our sports springs. With the exception of stiffer rates and slight change in ride height; you can expect the same characteristics as our sports springs.
10. TuningPros LS-053-B Lowering Springs Kit Blue Set of 4
Feature
Color: Blue; Lower rate: 1.25-Inch Front, 1.0-Inch Rear ; Spring rate: 230F & 205RConstructed from Japan SAE 9254 cold wounded steel; Corrosion-Protected with phosphate and powder coatings
Spring rates specifically tuned for handling and comfort; Provide exceptional response, control and balance
Sold as a complete set of 4 springs; Compatible with OEM stock or aftermarket shocks
Custom fit for your vehicle; This part is guaranteed to fit: Mitsubishi Lancer 2007-2011 (Not fit on Evolution model)
Description
This lowering springs have been designed to give your vehicle superior handling with an aggressive race look. By radically lowering the center of gravity from OE height, using precision engineered progressive spring rates, it dramatically reduce squat during acceleration, body roll in corners, nose-dive under braking and improve performance. Made with SAE 9254 cold wounded steel, one of the strongest materials available and corrosion-protected with phosphate and powder coatings for durability. Spring rates are specifically tuned for handling and comfort, it provide exceptional handling, response, control and balance. Custom made to fit specific vehicle application.
- Sold as a complete set of 4 springs, which inclues 2 front springs and 2 rear springs
- Lower rate: 1.25-Inch Front, 1.0-Inch Rear ;
- Spring Rate 230F & 205R
Recent Comments