The 10 best pc epoxy resin
Finding your suitable pc epoxy resin is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best pc epoxy resin including detail information and customer reviews. Let’s find out which is your favorite one.
1. PC Products 70147 PC-Clear Epoxy Adhesive Liquid, 1 oz Double Syringe, Clear
Feature
4 minutes (approx.) working time, 60 minute cure time (24hrs full cure)Opaque during work time
Clear after setting
Excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
Waterproof, sandable and paintable
Description
PC-Clear is a completely clear liquid epoxy. PC-Clear is formulated to remain clear during and after its curing time. PC-Clear is very durable and flexible making it unlike many liquid epoxies. PC-Clear demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. PC-Clear will not bond to wax paper, Teflon, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combinations. Use when you are concerned about the appearance of your repair and a clear liquid epoxy is what you are looking for.2. PC Products PC-Rot Terminator Epoxy Wood Hardener, Two-Part 1.5gal in Two Bottles, Amber 192610
Feature
Two-part epoxy wood consolidant hardens rotted wood and protects against future water and wear damageCan be used in indoor and outdoor applications, with an application temperature range of 35 to 115 degrees F and a service temperature range of -20 to +200 degrees F
Low viscosity liquid for filling and sealing gaps deep in the wood grain
Provides work time of 60 minutes to fully saturate wood
Can be primed, painted, or stained after it has been cured
Description
PC-Rot Terminator is structural wood hardener designed to strengthen decayed or rotted wood. The mixture is a low viscosity liquid that penetrates porous surfaces filling and sealing voids with an epoxy that cures to a hard but durable component. PC-Rot Terminator is useful for replacement of missing wood fibers or wood resin. PC-Rot Terminator fills the voids in the wood with an elastomer that has strength greater than wood. PC-Rot Terminator acts as a binder that glues the wood fibers together. The wood fibers become much stronger in combination with the epoxy elastomer. PC-Rot Terminator contains 100 percent active ingredients and does not contain solvents which may evaporate and cause shrinkage. The cure rate in the thicker sections is faster than in the thin sections. The greater the temperature, the faster the cure time. PC-Rot Terminator cure can be accelerated using a light bulb or other gentle heat source. The cure rate is halved for every 20 degree F increase. After cure (roughly 24 hours) fill in missing pieces with PC Woody paste epoxy. One unit of 24 ounces will seal 50 to 100 square feet of deck as a sealer. For severely rotted wood, one unit will treat 500 to 2500 cubic inches. The amount of usage depends on the porosity of wood. Damp wood that is heavy with water will not accept the maximum amount of the mixture. PC-Rot Terminator can not displace water in wood. Work time: 60 minutes. Thin film set: 12 Hours. Cure for service: 24 Hours. Maximum cure: 7 Day. Compressive modulus: 230000 psi. Compressive yield strength: 6500 psi. Tensile strength: 4500 psi. Tensile modulus: 210000 psi. Tensile elongation at break: 12 percent. Flexural strength: 9500 psi. Flexural modulus: 300000 psi. Hardness shored: 78. Mar resistance: 1.05 Kg.3. Epoxy, Fast Setting, 16 oz., Clear
Feature
Price For: Each Application Time: 4 min. Functional Cure: 1 hr. Work Life: 4 min. Shear Strength (PSI): 2450 Item: Epoxy Temp. Range (F): -20 Degrees to 200 Degrees Green Environmental Attribute: Does not Contain Polymers Based On Zinc or Toxic Metals, Isocyanate, or Polymers of Urethane Color: Clear Mixing Ratio: 1:1 Full Cure: 1 hr. Compressive Strength (PSI): 6500Includes: 8 oz. Hardener & 8 oz. Resin Type: Medium Viscosity, Fast Curing, Waterproof After Cure Container Type: Bottle Size: 16 oz. Country of Origin (subject to change): United States
Description
' Epoxy, Fast Setting, Clear, 16 oz., Bottle, Mixing Ratio 1:1, Application Time 4 min., Functional Cure 1 hr., Full Cure 1 hr., Work Life 4 min., Includes 8 oz. Hardener & 8 oz. Resin, Package Quantity 1 '4. Resin Static Mixer MA5.4-17S Mixing Nozzles for Duo Pack Epoxies 50 PCS
Feature
Resin Static Mixer MA5.4-17S Mixing Nozzles for Duo Pack Epoxies 50 PCSDescription
Transport PolicyShipping method: free Epacket
ships out within 5 business days
Estimated Shipping time:
United States10-20days
Russia 10-20days
United Kingdom 5-10 days
Australia10-15 days
France 10-15 days
Germany10-15 days
Israel 10-15 days
Canada 10-15 days
Ukraine10-15 days
Norway 10-15 days
Saudi Arabia 10-15 days
product description:
Model: MA5.4-17S
Length: 103mm
Inner diameter: 5.4mm
Outside diameter: 7.6mm
Section number: 17
5. PC Products 164440 PC-Petrifier Water-Based Wood Hardener, 16 oz Bottle, Milky White
Feature
Water-based wood hardener to restore and strengthen soft or rotted wood in non-structural areas such as window sills, frames, trim, and decorative beamsCan also be used to prepare old wood for priming and painting, and helps seal wood from future damage
Continuous service temperature range from 33 to 200 degrees F
Provides cure for service time of 24 hours and has full cure time of 3 to 7 days
Thin consistency to deeply penetrate and saturate wood fiber
Description
The PC Products PC-Petrifier is a water-based wood hardener used to restore and strengthen soft or rotted wood in non-structural areas such as window sills, frames, trim, and decorative beams. The water-based hardener can also be used to prepare old wood for priming and painting, and helps seal wood from future damage. It has a thin consistency to deeply penetrate and saturate wood fiber.
Specifications
Continuous service temperature range | 33 to +200 degrees F |
Time until cured for service | 24 hours (dependent on temperature and porosity of wood being treated) |
Time until fully cured | 3 to 7 days (dependent on temperature and porosity of wood being treated) |
Color | Milky white |
Protective Coating Company manufactures products to repair and restore various materials, including wood and concrete. The company, founded in 1954, is headquartered in Allentown, PA.
6. Fellee 3 Pcs/Set Notebook Silicone Molds, Notebook Mold with Resin Epoxy, DIY Craft Making,Semi-Transparent Mould
Feature
DIY PLEASURE: Can make Notebook.Molds: Makes your life full of surprises and fun.
MATERIAL: Made of silicone, flexible, resistant to tearing, durable in use.
HOW TO USE: When you release the item out of the mold, just twist the mold and press the.
ADVANTAGE: Compare to buy Notebook, you can play your imagination into the Notebook you want.
7. Fellee 2 pcs/set Small Cat Polymer Clay Silicone Mold,Crafting, Resin Epoxy, Jewelry Pendant Earrings Making, DIY Mobile Phone Decoration Tools,Semi-Transparent
Feature
Size: 2.05x1.57x0.4 in / 1.77x1.57x0.31 in .High Quality: improved version, high quality silicone.
Flexible, durable and reusable, easy to get the mold out.
Keep clean wash with soapy water and keep stored in a dry dust free area.
With hanging hole, ideal for earrings, necklace, keychain and other jewelry pendant making.
8. Yosoo Fiberglass Paddle Roller Kit Set, Bubble Buster Roller Tool 3 Pcs Fiberglass Laminating Bubble Roller Kit for Mold Resin Composite Tub Shower Bathtub Boat Repair
Feature
Material: Adopt of aluminum alloy materials and made by machining, a precise balance of glass and resin with no air pockets, durable and sturdy to useFunction: Used for removing air bubbles from lamination, leveling and compaction of resin coating to drive bubbles, and you just never know when you can use a random tool for something other than the designed purpose to save the day.
Application: Widely used in the production of glass fiber reinforced plastic, and the inner surface of the bubble roller puncture.
Description
FEATURES:DURABLE TO USE
--This item is manufactured by mechanical finishing of aluminum alloy material
ENHANCE STRENGTH & FLATNESS
--It is used to enhance the glass steel strength and flatness.
IMPROVING WORKING EFFICIENCY
--In the process of products, it can save resin, save time and costs, improving construction efficiency.
WIDELY APPLICATION
--Widely used in industrial production of glass steel, for leveling and compacting the resin coating driven bubble, commonly used for products' internal and surface blistering roll puncture.
PROTECT YOUR PROTECT
--It also can effectively improve the labor efficiency and product quality.
SPECIFICATION:
Condition: 100% Brand New
Material: Aluminum alloy + ABS
Total Length: Approx. 31cm / 12.2inch
Roller Head Length: Approx. 50mm / 2.0inch, 75mm / 3.0inch, 50mm / 2.0inch
Product Weight: Approx. 323g
PACKAGE INCLUDED
3pcs/set * Bubble Paddle Tool
NOTE:
1. Due to the hand measurement, there have size error about 1-2cm.
2. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
9. Resin Static Mixer MA6.3-21S Mixing Nozzles for Duo Pack Epoxies 50 pcs/item
Feature
Resin Static Mixer MA6.3-21S Mixing Nozzles for Duo Pack Epoxies 50 pcs/itemDescription
Transport PolicyShipping method: free Epacket
ships out within 5 business days
Estimated Shipping time:
United States10-20days
Russia 10-20days
United Kingdom 5-10 days
Australia10-15 days
France 10-15 days
Germany10-15 days
Israel 10-15 days
Canada 10-15 days
Ukraine10-15 days
Norway 10-15 days
Saudi Arabia 10-15 days
Resin Static Mixer MA6.3-21S Mixing Nozzles for Duo Pack Epoxies
Model: MA6.3-21S
Length: 153mm
Inner diameter: 6.3mm
Outside diameter: 8.7mm
Section number: 21
Can be directly connected to the needle
10. Hardware & Accessories Decorative Hardware - 2Pcs Rectangle Silicone Mold Mould for Epoxy Resin Jewelry Bookmark Craft - 2 Pcs x Silicone Mold(not incldued the Bookmarks)
Feature
Specifications: Pattern: RectangleMaterial: Slilcone
Mold Color: Transparent
Size: As the picture shown
Feature:
Description
Specifications: Pattern: RectangleMaterial: Slilcone
Mold Color: Transparent
Size: As the picture shown
Feature:
1. Easy to use and clean
2. Silicone is flexible, resistant to tearing, in use
3. Non-stick, stripping easy, easy to clean, environmentally friendly, low carbon, can be recycled
4. Simple and practical, health, natural antibacterial, high strength and flexibility, corrosion resistance and adaptablility
5. Difficult to damage, cracking, durable, super-resistant to temperatures, high temeperature 230 degrees, low
temperature of minus 40 degerees
6. Safe, non-toxic, odorless, heat evenly
7. It is great for making jewelry bookmark, cakes, bread, mousse, jelly, prepared foods, chocolate, ice, pudding, jelly,
chocolate, cake, moon cake, soap, fondant, rice balls etc..
Package includes:
2 Pcs x Silicone Mold(not incldued the Bookmarks)
Recent Comments