The 10 best server rack cable organizer 2022
Finding the best server rack cable organizer suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
1. Fencher 2-Pack 19 Inch 1U Cable management Horizontal Cable Rack Mount manager with mounting screws for service rack cabinet 24 slot Finger Duct with Cover
Feature
Made of cold rolled steel, Rounded edge without cutting cable, Durable and will never rust.Keeping your cables organized on a rack mount. Reducing the possibility of disconnections and maintaining the organization of cables
Dimension: 1.75 * 1.75 * 19 inch, ( select the color Fencher 1U cable management if you like a taller version, 1.7 * 2.8 * 19 inch ). fits in any standard 19 rack mount, server cabinet, shelf and more.
Mounting screws included for easy installation; Free cables ties provided for easy cable management.
Quality and you can trust- 5 years limited warranty. (Save on the New 2-Pack, same product but cost less)
Description
Minimize the risk of a costly disconnection or cable failureBy reducing cable stress and routing cables properly, you minimize the risk of a costly disconnection or cable failure. Increased airflow with proper cable management also helps boost system performance and avoid costly failures that lead to downtime, damage and data loss. The Lancher Cable Manager helps you keep cables neatly organized and under control in all IT environments.
Easy installation
Come with all of the necessary hardware, making installation quick and easy. Can be installed on anywhere in an enclosure or open rack, providing a wide range of installation flexibility
Package includes:
Lancher 1U 19inch cable management * 2
Mounting screws*8
Cage nuts*8
Cable ties *10
2. 2U Horizontal Finger Duct Rack Cable Management Panel with Cover - Server Rack Cable Duct - Rack Cable Organizer/Manager
Feature
Organize cables in your server rack or cabinet with a horizontal covered cable duct2U Finger Duct Rack Cable Management Panel with Cover
Server Rack Cable Duct
Rack Size: 19"
Add or remove bundled cables quickly, with a removable top cover
Separate and route cables easily, using the fingers on either side or the rear pass-through holes
Add or remove bundled cables quickly, with a removable top cover
Increase the longevity of your server and networking equipment interfaces by providing cable strain relief
Finger duct plus rear pass-through holes for routing cables
Removable top cover
2U rack design
Sturdy steel construction
Mounts to standard 19" 2 or 4-post server racks
Description
Organize cables in your server rack or cabinet with a horizontal, covered cable duct - The CMDUCT2U 2U Finger Duct Cable Management Panel mounts to a standard 19" 2 or 4-post rack to help you organize horizontal cabling, through a covered cable duct.This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases. The 2U cable organizer features a removable top cover that makes it easy to add or remove bundled cables quickly. The duct also offers a series of fingers on either side, as well as pass-through holes at the back to help you route your cables where you need them, and reduce cable strain in the process. Made of high-quality steel and plastic, the cable manager is a durable solution for your server room or wiring closet. For easy installation, this horizontal cable organizer comes complete with 2 sets of rack screws (M5 and M6). Backed by a StarTech.com 2-year warranty.3. 1U Vertical Server Rack Cable Management D-Ring Hook - 2.2x3.9in (5.7x10cm) Rack Cable Organizer - Rackmount Cable Ring
Feature
Add a cable management hook to your server rack or cabinet for strain relief and organization1U Bracket can be mounted to any standard rack post
Sturdy steel construction
1U Vertical Server Rack Cable Management D-Ring Hook
Use with server racks and cabinets, structured wiring closets and network distribution cabling to keep cables neat and tidy
Description
The CMHOOK1U Vertical Cable Management D-ring lets you add a 1U metal cable hook to your server rack or cabinet to provide an organized channel for your cables.This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases. Constructed of high-quality steel, the cable D-ring measures 2.2 x 3.9in (5.7 x 10cm) and offers a flexible opening for easy insertion of bundled cables. Providing strain relief for attached cables, multiple cable rings can be attached to your rack where you need them for a versatile cable management solution. Please see our other cable management D-ring products for different size configurations: 1U Cable Management D-ring - 2.2 x 5.9in (5.7 x 15cm) - CMHOOK1UL 1U Cable Management D-ring - 1.8 x 3.9in (4.5 x 10cm) - CMHOOK1UN Backed by a StarTech.com 2-year warranty.4. 1U Brush Panel Horizontal Grommet Strip Server Rack Cable Management Panel by CableRack (5-Pack)
Feature
Add the professional look to your server rack and prevent cold air loss with the CableRack 1U brush grommet strip horizontal server rack cable management panel. This 5-Pack bundle is a great way to get the brush panels you need and save by purchasing a multipack.Cold air aisle datacenters focus cooling air to the front of your network gear. This brush panel prevents cold air loss between equipment and re-directs the cooling air through your servers, routers and switches.
Add this cable management strip to your existing wire management rack panels to compliment your rackmount gear and give the final product that clean finished professional look.
This pass through grommet panel measures 1U high (1.75") x 19" wide to fit all 19" rack rail systems. It's sturdy construction is made of steel for the frame and the bristles are made from polypropylene.
Whenever you need to route cables over or under a piece of equipment in the datacenter, deploy this rack cable organizer. Add this beautiful brush panel as part of your rack tools to improve the look.
Description
Features
Preserve precious cold air in the datacenter and re-direct air flow through your critical equipment, while reducing energy waste with our 1U brush grommet strip. This cable grommet panel mounts horizontally, not vertical, in 19" rail systems It fits perfect between devices to redirect the cold air intake across the network servers, routers, and switches. Any size datacenter deployment can benefit from rack mount cable management, using a brush strip greatly reduces energy costs and you'll immediately notice lower cooling costs using these cable management grommet panels.
Applications
Many of todays top datacenter facilities feature a cold air aisle which provides a protected cold air space in front of the network equipment and exhausts the hot air out the rear. Gaps left open between network gear commonly occur when you leave a space for routing cables. This brush panel acts as your network cable management path from the cold air aisle to the rear. Rack cable manager panels like this are absolutely necessary to create a professional finished look for your cable manager 1u applications.
Benefits
If you're already using D ring cable organizer panels, you can add this cable grommet just below the cable organizer rack and allow your rack accessories cables to pass through, while drastically reducing the cold air loss from the front of your network gear. This 1U cable management accessory is a must-have in cold aisle systems where your cable management rack or server cable management system is failing to provide necessary strain relief for copper wire and fiber cables. Make sure you have enough cable management 1u panel brush tools to provide a cable outlet without cool air loss. Each new deployment you build, you'll want this cable strain brush rack as part of your server rack accessories.
5. 1U Horizontal Rack Mount Cable Management Unit with Panel Plastic
Description
High quality 1U plastic cable manager with cap/panel. This product is designed to organize multiple cable paths on racks or incabinets. 19" standard installation.3.5 inches deep. Easy to install and use for server cabinets and racks. Color: Black. Please view our listing for quantity price for this item.6. NavePoint 1U Metal Rack Mount Horizontal Cable Manager Duct Raceway for 19" Server Rack
Feature
Quantity: 1 panelMounts onto a standard 19" rack.
Ideal tool to organize and support the horizontal cables at the back of your equipment rack.
Rack Screws Included.
Light weight, easy to install or remove.
Description
The horizontal cable management is made of steel and was designed to be used with any patch panels, rack and cabinet mount products. It mounts on standard 19" racks or cabinets and provides a clean, beautiful and simple means of organizing from small to large bundles of cables and patch cord.7. CNAweb 1U Vertical Server Rack Cable Management Minder D-Ring Hook Cable Organizer - Pack of 5
Feature
Height (Rack Units): 1URoute cables neatly through your rack with an easy-to-install cable management ring
Increase the longevity of your server and networking equipment interfaces by providing cable strain relief
1U Bracket can be mounted to any standard rack post
8. Rosewill 2U 19 Inch Rack Mount Horizontal Cable Management with Mounting M6 Screws, Finger Duct Cable Manager with Cover (RSA-2UCA001)
Feature
The 2U server rack cable management consists of sturdy steel construction and has a removable top cover that allows users to separate and route cables easily using the fingers on either side or the rear pass-through holesDesigned with solid metal finger duct and rear pass-through holes for routing cables. Package includes M6 rack screws which provide the best way to mount to any standard 19" 2 post or 4 post server rack.
Professional server rack cable management that helps keep cables orderly on a rack mount, reducing the possibility of disconnections and maintaining the organization of cables
The 19 inch rack mount aids in increasing the longevity of your server and networking equipment interfaces by providing cable strain relief. Additionally, it allows for easy installation and cable organization.
Constructed with round edges to prevent cutting cables and made with durable material to avoid rusting. Dimension: 3.5 * 3 * 19 inch. Fits in any standard 19 rack mount server wall mount cabinets, server racks, server shelves and more.
Description
2U Metal Cable Duct9. Navepoint 1U Horizontal 19-Inch Rack Mount Cable Management Raceway Duct Panel With Cover Black
Feature
Quantity: 1 panelMounts onto a standard 19" rack.
Ideal tool to organize and support the horizontal cables at the back of your equipment rack.
Rack Screws Included.
Description
The horizontal cable management was designed to be used with any patch panels, rack and cabinet mount products. It mounts on standard 19" racks or cabinets and provides a clean, beautiful and simple means of organizing from small to large bundles of cables and patch cord.10. C2G/Cables to Go 03746 2U (3.5 Inch) Horizontal Cable Management Panel
Feature
Works with any standard 19 inch relay rackThis 2u (3.5in) high panel fits into any standard 19-inch rack and provides a trough where excess cable can be stored
Easy to install with this space-saving 2u design
Lifetime Warranty
Recent Comments