Thing need consider when find atlas monopod for rifles?
When you looking for atlas monopod for rifles, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable atlas monopod for rifles is not an easy task. In this post, we show you how to find the right atlas monopod for rifles along with our top-rated reviews. Please check out our suggestions to find the best atlas monopod for rifles for you.
1. Genuine Accu-Shot Atlas Bipod BT46-LW17 PSR 4.75" - 9", oem
Feature
Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever.Weight 13.61 ounces.
Height Range approximately 4.75 - 9.0". 15 degrees +/- of preloaded Pan. 15 degrees +/- of preloaded Cant.
Available in black only.
Leg positions are; stowed back, 90 degrees straight down, 45 degrees forward and stowed forward. Fore and Aft pivot limiting Bosses* Non-Rotating Legs* Strengthened Leg Boss* Inner Leg constructed from T7075*
Description
Description Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever. Height Range approximately 4.75 - 9.0". 15 degrees +/- of preloaded Pan. 15 degrees +/- of preloaded Cant. Leg positions are; stowed back, 90 degrees straight down, 45 degrees forward and stowed forward. Fore and Aft pivot limiting Bosses* Non-Rotating Legs* Strengthened Leg Boss* Inner Leg constructed from T7075* Weight 13.61 ounces. Available in black only.2. BT10 Atlas Bipod Standard Two Screw 1913 Rail Clamp
Feature
Material: T6061 AluminumBT10-Mounts Directly to any 1913 Style Picatinny Rail via a Low Profile two Screw Clamp Assembly
Height Range Approximately 4.75 - 9.0"
Weight 11.0 Oz.
Made in the U.S.A.
Description
The Atlas BT10 Bipod is constructed of T6061 Aluminum and hard anodized. It mounts directly to any 1913 style Picatinny rail using a low profile 2 screw clamp assembly. This bipod features built in pan and cant (up to 15 degrees +/- preload. The legs are stainless steel and are notched for a positive lock on your desired length (5 positions) and have a knurled grip area. The feet are removable by pressing the pin and can be replaced with any of the other Atlas feet (not included). The Atlas BT10 Bipod is proudly Made in the USA!3. Atlas Bipods Atlas Bipod Quick Change, 3in Leg Extensions 2, Black, BT22
Description
Atlas Bipods Atlas Bipod Quick Change, 3in Leg Extensions 2, Black, BT224. Atlas Accu-Shot BT37 Spike Feet Bipods
Feature
Easily installed with the press of a stainless steel plunger, the Spikes deliver a singularly aggressive foot to support the bipodThe Spike portion is approximately 1.45 long with the largest OD of approximately 1.
Available in raw Stainless with black insert only.
Weight is 2.7 ounce and are made in America.
Description
Easily installed with the press of a stainless steel plunger, the Spikes deliver a singularly aggressive foot to support the bipod. The Spike portion is approximately 1.45" long with the largest OD of approximately 1". Available in raw Stainless with black insert only. Weight is 2.7 ounce and are made in America.5. Authentic Atlas Bipod BT46LW17 w/ ADM 170-S Lever (w/ Bonus Hook & Loop USA Black Flag Patch)
Feature
Bonus Item: American Flag Black PVC Velcro Patch Included!Buy with confidence from a B & T (Atlas Bipod) authorized dealer. Tactical Intent only offers genuine Atlas bipods, made in the USA by B&T Industries, LLC.
Mounts Directly to any 1913 Style Picatinny Rail via Included ADM 170-S Lever
Height Range approximately 4.75 - 9.0"
Weight: 13.61 oz.
Description
Buy with confidence from a B & T (Atlas Bipod) authorized dealer. Tactical Intent only offers genuine Atlas bipods, made in the USA by B&T Industries, LLC.The Atlas BT10-LW17 Bipod is constructed of T6061 Aluminum, hard anodized and is trusted in both the Law Enforcement and Military communities as well as one of the top bipods for precision rifle shooters. This bipod mounts directly to any 1913 style Picatinny rail using the included ADM 170-S lever.
Specifications:
Bonus Item: American Flag Black PVC Velcro Patch
This high quality tactical morale patch is the perfect option for personalizing your gear or uniform. Show off your patriotism and let people know what team your on, easily attach this to any velcro hook compatible area. Goes well with caps, backpacks, tactical vests, uniforms. Great item for airsoft, paintball and other activities. Easily washable material in case of dirt, simply take off of uniform and rinse with soap and water.
6. BT47-LW17 PSR Atlas Bipod: Tall with ADM 170-S Lever
Feature
Height Range: 7.0 - 13.0" approximatelyPreloaded Pan: 15 degrees +/-
Preloaded Cant: 15 degrees +/-
Leg Positions: 0, 45, 90, 135 and 180 degrees
Weight: 15.13 ounces
Description
The BT47-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR). Available in black only.7. Accu-Shot 3.35" 1913 Rail (BT15)
Feature
Rail will accommodate hole patterns with a center to center spacing of 1.76 - 2.78"relieved base to accommodate curved surfaces.
A standard sling stud can be used as one fastener or two Button head machine screws can be used (not included) to attach this rail to the forearm of standard rifle stocks
The BT15 can also be attached to a horizontal surface on the Butt section to attach our BR12 or BT13 Precision Rail Monopods.
The BT15 also has a flush cup for that style of sling swivels.
Description
The new BT15 3.35" 1913 Rail will accommodate hole patterns with a center to center spacing of 1.76 - 2.78" with a relieved base to accommodate curved surfaces. A standard sling stud can be used as one fastener or two Button head machine screws can be used (not included) to attach this rail to the forearm of standard rifle stocks. The BT15 can also be attached to a horizontal surface on the Butt section to attach our BR12 or BT13 Precision Rail Monopods. The BT15 also has a flush cup for that style of sling swivels.8. Atlas Authentic Bipod BT10LW17 w/ADM 170-S Lever (w/Bonus Hook & Loop USA Black Flag Patch)
Feature
Bonus Item: American Flag Black PVC Velcro Patch Included!Buy with confidence from a B & T (Atlas Bipod) authorized dealer. Tactical Intent only offers genuine Atlas bipods, made in the USA by B&T Industries, LLC.
Mounts Directly to any 1913 Style Picatinny Rail via Included ADM 170-S Lever
Height Range Approximately 4.75 - 9.0"
Weight 12.7 Oz
Description
Buy with confidence from a B & T (Atlas Bipod) authorized dealer. Tactical Intent only offers genuine Atlas bipods, made in the USA by B&T Industries, LLC.The Atlas BT10-LW17 Bipod is constructed of T6061 Aluminum, hard anodized and is trusted in both the Law Enforcement and Military communities as well as one of the top bipods for precision rifle shooters. This bipod mounts directly to any 1913 style Picatinny rail using the included ADM 170-S lever.
This bipod features built in pan and cant up to 15 +/- preload. The legs are stainless steel and are notched for a positive lock on your desired length (5 positions) and have a knurled grip area. The feet are removable by pressing the pin and can be replaced with any of the other Atlas feet (not included). The Atlas BT10-LW17 Bipod is proudly Made in the USA!
Bonus Item: American Flag Black PVC Velcro Patch
This high quality tactical morale patch is the perfect option for personalizing your gear or uniform. Show off your patriotism and let people know what team your on, easily attach this to any velcro hook compatible area. Goes well with caps, backpacks, tactical vests, uniforms. Great item for airsoft, paintball and other activities. Easily washable material in case of dirt, simply take off of uniform and rinse with soap and water.
9. AccuShot 3523 Atlas Bipod with ADM 170-S Lever BT10LW17
Feature
Mounts directly to any 1913 style pica tinny rail via included dam 170-s leverHeight range approximately 4.75 - 9.0"
Weight 12.7 ounces
Available in black only
Description
The atlas bipod offers many features that place it in a category of its own.Those featuresincludelegsthat move independently and can be deployed in a 45 degree position either forwards or backwards, in the traditional 90 degree position, and facing directly to the front or back, locking securely into 5 positions through a 180 degree arc.Itprovides the shooter with30 total degrees left to right pan as well as 30 total degrees of cant, making it easy to align your cross hairs on the target regardless of the terrain. Offering the strength and stability that shooters demand, the atlas provides rock solid support while weighing less than 11 ounces. The patented atlas is constructed of the finest materials and built to the highest standards right here in the USA. Mounts directly to any 1913 style pica tinny rail via included dam 170-s lever. Height range approximately 4.75 - 9.0". Weight 12.7 ounces. Available in black only.10. Atlas Bipod BT46-NC PSR: Standard height No Clamp
Feature
BT46-NC-No Clamp model (No Clamp meaning it does not have the means to attach to a rail) it requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance and LT271 or the BT10-NC will mount directly to our BT19 (AI) and BT21 (TRG) spigots.The BT46-NC also mounts directly to our AAIS Part # BT19 and Sako TRG mount (in R&D now). Height Range approximately 4.75 - 9.0". 15 degrees +/- of preloaded Pan. 15 degrees +/- of preloaded Cant. Leg positions are; stowed back, 90 degrees straight down, 45 degrees forward and stowed forward.
Available in black only.
Weight 11.42 ounces.
Recent Comments