Thing need consider when find rc kill switch?
When you looking for rc kill switch, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable rc kill switch is not an easy task. In this post, we show you how to find the right rc kill switch along with our top-rated reviews. Please check out our suggestions to find the best rc kill switch for you.
1. Dynamite Large Scale Safety Kill Switch
Feature
Kills your 2-cycle gas engine on command, loss of radio signal, low battery, or total battery power lossComes ready to install - no soldering required
Optically Coupled to isolate your ignition system from your radio system
Built-in LED for easy-to-spot operational status
Description
Key Features
- Kills your 2-cycle gas engine on command, loss of radio signal, low battery, or total battery power loss
- Comes ready to install no soldering required
- Optically Coupled to isolate your ignition system from your radio system
- Built-in LED for easy-to-spot operational status
- 3-Channel Radio System Required
- Not Compatible with AVC-Equipped Receivers
2. Zyhobby DLE Engine Kill Switch, RC Opto Kill Switch with Futaba Plug DLA DLE DA Ignition Cut Off- Safety 100% Surface Mount Technology
Feature
Fiber Optic conpled input/outputFits: Most gas RC cars, boats, planes, helicopters
Include a mountable LED indicator once start ignition
Can automatically cut off by turn off the transmitter power
Shut down the transmitter power or receiver to cut off automatically
Description
ZYHOBBY RC Opto DLE Engine Kill Switch for DLA DLE DA Ignition Cut OffThis device allows you to safely and remotely kill your electronic ignition equipped engine from your transmitter. This kill switch is Fiber Optically Coupled to isolate your ignition system from your radio system. (No Interference!!)
Compatibility Devices
DLE20/DLE30/DLE35 RA/DLE55/DLE55 RA/DLE60/DLE111/DLE170/DLE222 and AGM30/AGM60 gas engines
Specification
* Brand: Rcexl
*Material: metal + plastic
* Model: Opto Gas Engine Kill Switch
* Type: Version 2.0
* Fits: Most gas RC cars, boats, planes, helicopters
* Input battery: Li-Po, Li-ion, A123, Ni-Mh, NiCad
* Output current: 3V 3A / 20V 16A
Features
* Include a mountable LED indicator once start ignition
* Fiber Optic conpled input/output
* PIC12F675 Controller
* Low Voltage Drop-Less than 150mv.
* Low to 3V 3A output
* Up to 20 Volt 16 amp MOS-FET (IRF7456) output.
* Reverse Battery input protection.
* Pure Surface Mount Technology
* Universal connectors with heavy gauge wires
* Can automatically cut off by turn off the transmitter power
* Shut down the transmitter power or receiver to cut off automatically
*This device allows you to safely kill your engine at anytime(on the ground, or in the air!)
Note
*This switch does not have BEC function (BEC: Battery Eliminator Circuitry)
*Do not touch grease or water or corrosive materials when installing
Package
1 x Opto Gas Engine Kill Switch V2.0
3. Evolution Engines Optical Ignition Kill Switch
Feature
Remote LED to indicate if the ignition is liveFiber optically coupled to eliminate interference
Li-Po/Li-Ion/LiFe/Ni-Cd/Ni-MH compatible
Output range from 3V, 3 amps up to 20V, 16 amps
Minimal voltage drop, less than 150mv
Description
Key Features
- Remote LED to indicate if the ignition is live
- Fiber optically coupled to eliminate interference
- Li-Po/Li-Ion/LiFe/Ni-Cd/Ni-MH compatible
- Output range from 3V, 3 amps up to 20V, 16 amps
- Minimal voltage drop, less than 150mv
- Surface mount technology
- High-quality wiring with universal servo connectors
- Only 0.3 oz/8 g
- Automatically shuts down power to the ignition on loss of signal
Overview
A must-have safety device for any model with a gasoline engine, with the Evolution Optical Electronic Kill Switch you can kill your gas engine remotely from your transmitter without having to touch your model. The kill switch is fiber optically coupled to isolate your radio system from the ignition system so you won't have to worry about interference.
4. DLE Engine Kill Switch Shipped in US,ZYHOBBY RC Opto Kill Switch with Futaba Plug DLA DLE DA Ignition Cut Off
Feature
Fiber Optic conpled input/outputFits: Most gas RC cars, boats, planes, helicopters
Include a mountable LED indicator once start ignition
Can automatically cut off by turn off the transmitter power
Shut down the transmitter power or receiver to cut off automatically
Description
ZYHOBBY RC Opto DLE Engine Kill Switch for DLA DLE DA Ignition Cut OffThis device allows you to safely and remotely kill your electronic ignition equipped engine from your transmitter. This kill switch is Fiber Optically Coupled to isolate your ignition system from your radio system. (No Interference!!)
Compatibility Devices
DLE20/DLE30/DLE35 RA/DLE55/DLE55 RA/DLE60/DLE111/DLE170/DLE222 and AGM30/AGM60 gas engines
Specification
* Brand: Rcexl
*Material: metal + plastic
* Model: Opto Gas Engine Kill Switch
* Type: Version 2.0
* Fits: Most gas RC cars, boats, planes, helicopters
* Input battery: Li-Po, Li-ion, A123, Ni-Mh, NiCad
* Output current: 3V 3A / 20V 16A
Features
* Include a mountable LED indicator once start ignition
* Fiber Optic conpled input/output
* PIC12F675 Controller
* Low Voltage Drop-Less than 150mv.
* Low to 3V 3A output
* Up to 20 Volt 16 amp MOS-FET (IRF7456) output.
* Reverse Battery input protection.
* Pure Surface Mount Technology
* Universal connectors with heavy gauge wires
* Can automatically cut off by turn off the transmitter power
* Shut down the transmitter power or receiver to cut off automatically
*This device allows you to safely kill your engine at anytime(on the ground, or in the air!)
Note
*This switch does not have BEC function (BEC: Battery Eliminator Circuitry)
*Do not touch grease or water or corrosive materials when installing
Package
1 x Opto Gas Engine Kill Switch V2.0
5. Redcat Racing Gas Engine Kill Switch Vehicle
Feature
Gas Engine Kill SwitchGenuine Redcat Racing Gas & Nitro Engines, Spare Parts, Tools & Accessories
Redcat Racing Part Number RRC-05K
Description
Use the Parts Search at www.redcatracing.com to make sure you are purchasing the right part for your vehicle. This item is compatible with the following Redcat Racing models: RAMPAGE CHIMERA SR, RAMPAGE DUNERUNNER, RAMPAGE MT, RAMPAGE RALLY, RAMPAGE TT, RAMPAGE XR, RAMPAGEXB, RAMPAGEXSC, RAMPAGEXTRAMPAGE CHIMERA SR, RAMPAGE DUNERUNNER, RAMPAGE MT, RAMPAGE RALLY, RAMPAGE TT, RAMPAGE XR, RAMPAGEXSC, RAMPAGEXT.6. TOP SPEED RC WORLD Remote Engine Kill Switch Kit for Hpi Rovan Km 1/5 Rc Buggies Baja 5B 5T 5SC
Feature
Gas Engine Killer for R/C ModelSingle Channel Assistant Control for R/C Model
Compatible with Normal 2/3 CH R/C Systems & Futaba PPM Signals(JR PPM Signal Excluded).
Description
TOP SPEED RC WORLD Remote Engine Kill Switch KitInput power3- 6.2V @7mA Typical, 100mA MaxHave Very Safe & reliable HV Insulation Using Optical-CouplerNoise Filters & Signal ShapingLow Power Consumption, Very Low Stand-By Current.7. Rcexl Opto Gas Engine Kill Switch
Feature
This device allows you to safely and remotely kill your electronic ignition equipped engine from your transmitter. This kill switch is Fiber Optically Coupled to isolate your ignition system from your radio system. (No Interference!!)The kill switch not including BEC function. (BEC: Battery Eliminator Circuitry)
8. Engine Kill Switch fit ZENOAH CY FUELIE for King Motor ROVAN HPI Baja 5B 5T 5SC
Feature
Fit: HPI, Rovan, KingMotor bajaFit: Zenoah, CY Car engines
9. DuraTrax Kill Switch Assembly 23cc
Feature
This is the DuraTrax Engine Kill Switch for the 23cc Engine.Features: Two 3" (76mm) long (+/-) leads with spade connectors Red kill switch on a black base For the DuraTrax 23cc EngineIncludes: One DuraTrax Engine Kill SwitchDescription
This is the Engine Kill Switch for the Duratrax 23cc gas engine, DTXG0270. / / FEATURES: Red kill switch on a black base / Two 3"" (76mm) long (+/-) leads with spade connectors / / INCLUDES: One kill switch for the Duratrax 23cc gas engine / / / mcw 9/20/04 / ir/jxs10. Remote Kill Switch kit for Rovan HPI Baja 5B Buggy 5T King Motor T1000 LOSI
Feature
For HPI Baja 5B buggy 5T King Motor T1000 LOSIFeature 1: You can Remotely shut off the engine from your remote control. This Requires a free 3rd channel on your radio Transmitter (often marked as AUX). This ideally needs to be a 3rd channel with On & Off function. Works with all 3 Channel Radio systems that have on/off function on 3rd channel. So far, I have only found the Spectrum DX3C not having an on/off function on third channel.
Feature 2: This Kill Switches' microprocessor constantly monitors the signal to the receiver for glitches or weak radio signal. If the radio Signal or the Battery supply falls under the required level, the module Shuts the Engine OFF (cuts off electricity to the spark plug).
Description
Two Functions:1) Allows you toShut Off your engine from your remote using the 3rd channel
2) "Auto EngineShut Off" Feature kills the engine Automaticallywhen Battery is Low orradio signal is weak
-Ideal Safety Feature for all RCengineswitha petrol/gasoline motor, Magneto Ignition, and stop switch.
Works for:HPI Baja 5B, SS, 5T, 5SC, Losi 5ive-T, FG Marder, RedCat, Rovan, King Motor, etc...etc...
Feature 1:You can Remotely shut off the engine from your remote control. ThisRequires a free 3rd channel on your radioTransmitter (often marked as AUX). This ideally needs to be a3rd channel withOn & Off function. Works with all 3 Channel Radio systems that have on/off function on 3rd channel. Sofar,I haveonly found the Spectrum DX3Cnot having an on/off function on third channel.
Feature 2:This Kill Switches' microprocessor constantlymonitors the signalto the receiver for glitchesor weak radio signal. If the radio Signalor theBattery supply falls under the required level, themodule Shuts the EngineOFF(cuts off electricity to the spark plug).
Recent Comments