Top 10 best factory radio amp adapter
Finding the best factory radio amp adapter suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
1. PAC Premium Amplifier Add-On/replacement Radio Sound System Interface Kit GM - PAC AOEMGM1416
Feature
The factory amp (if equiped) & system will remain unchanged.Interface is transformer isolated, maintains phase and is linear from 20 to 20,000 HZ.
This 4 channel interface will allow the output to be adjusted to the input requirements of the new amplifier, providing 2:1 gain and infinite attenuation.
The input connectors plug into the factory stereo and vehicle harness.
The 4 female RCA output jacks plug for connecting to the new amplifier.
Description
PAC Premium Amplifier Add-On/replacement Radio Sound System Interface Kit GM - PAC AOEMGM1416.2. PAC SNI-35 Variable LOC Line Out Converter
Feature
Adjustable Line Output ConverterUse the SNI-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier (RCA) level input
Utilize Audio Transformer for Noise Isolation
Phase Adjusted
.5 dB Linearity from 20 - 20,000 Hz
Description
The SNI-35 Adjustable 2-Channel Line-Out Converter from PAC Audio is a line-out converter for factory radios with 2 to 50 watts per channel, accepts speaker level input and provides stereo RCA output signal for adding an aftermarket amplified audio system. It allows 50 watts maximum input per channel and has a linear 20Hz to 20,000Hz output based on input signal. The transformer isolated for optimal sound and performance. The unit maintains correct phasing and works with most factory-installed radios.3. Kicker KISLOC 2-Channel K-Series Speaker Cable to RCA Adapter with Line Out Converter
Feature
K-Series Interconnect CableWorld's first micro surface mount line-out converter
Two channel Speaker to RCA
K-Grip dual-mold connectors offer sure grip
Split pin RCA with silver tinned OFC wire
Description
2-Channel K-Series Speaker Cable to RCA Adapter with Line Out Converter4. SCOSCHE LOC2SL Car Stereo 2-Channel Adjustable Amplifier Add-On Adapter in Black
Feature
ADD SUBWOOFERS: Works with high power car stereos (up to 80 watts per channel) to add subwoofer systems to any car stereo.EASY TO INSTALL: Provides amplifier remote turn on output without removing car stereo.
OUTPUT CONVERSION: Converts car stereo speaker wire outputs to RCA Cable outputs.
ADDITIONAL CHANNEL: Allows the addition of 2-channel or mono amplifiers to factory or aftermarket stereos.
CONTROLLER: Includes mountable remote for adjusting subwoofer level from the dash.
REQUIRED FOR USE: You must have an aftermarket amplifier in order to use this product.
BUY WITH CONFIDENCE: Backed by Scosche's Lifetime Tech Support and Limited Lifetime Warranty.
Description
The Scosche amplifier 2-channel adapter is the ideal solution for taking the high signal from your stock stereo or amplifier and then tapping into the stock speaker wire and converting it to a 2-channel RCA signal output Mountable level control included that lets you adjust the bass levels of the subwoofer directly from the dash. This speaker wire to RCA converter is compatible with high power car stereos up to 80 watts per channel. Perfect for fast installation when adding a subwoofer to your factory car stereo system for a new sound experience.5. Rockford RFHLC High Level Speaker Signal to Low Level RCA Adapter
Feature
2-Channel High-to-Low Level ConverterHigh-to-low signal converter to connect 4-channel amplifiers to radios without RCA output
Output Voltage: Up to 3V (low-level)
Description
Rockford 2 CHANNEL HI LO CONVERTER6. PYLE PLVHL60 2 Channel Speaker to RCA Converter
Feature
2 Channel Hi/Low Level RCA ConverterLevel Adjustable
Ground Loop Isolation and Noise Elimination
Aluminum Housing
Max Input: 50W
2 x Female RCA Outputs
Dimensions: 3.6''L x 2.6''W x 1.08''H
Sold as : Unit
2 Channel Hi/Low Level RCA Converter - 2 x Female RCA Outputs
Level Adjustable - Dimensions: 3.6''L x 2.6''W x 1.08''H
Description
This Pyle Link line out converter takes a takes a low-level input and converts it to a high-level input and converts it to a high-level RCA output. Adjust the levels using the built-in control. Ground loop isolation and noise elimination smoothes out your signal for output to an amplifier. Aluminum housing keeps your equipment safe. Max input 50 W.7. PAC LP7-2R L.O.C. PRO Series 2-Channel Line Output Converter with Remote Turn On
Feature
Built-in remote turn-on circuitAccepts both high-level & low-level input
Single stereo gain controls
Ultra compact housings achieved by recessing transformers into circuit board
High power-conservatively rated @ 55W per channel
Pro series 2-channel high power line output converter
Designed to optimize audio levels between radio and amplifier to achieve the best audio quality
Ideal use when replacing factory (OEM) radio or amplifier
Configurable for speaker level or RCA level input/output
Ultra-Compact size for greater installation flexibility
Description
L.O.C. Pro series 2-channel line output converter with remote turn on. Surface mount construction (SMT) for reliable and noise-free operation.8. PAC AOEM-FRD24 Add-On Amplifier Interface with 24-Pin Connector for 2005-Up Ford Vehicles
Feature
Interface that Allows the Replacement or Addition of an Amplifier in Select Ford Vehicles without Factory Amplified THX Sound SystemInterface is transformer isolated
Provides 2:1 gain and infinite attenuation
Linear from 20-20,000 Hz.Not compatible in vehicles equipped with the THX or Sony amplified systems
Input connectors plug into factory stereo and vehicle harness
Maintains phase
Linear from 20-20,000 Hz
Description
This adapter is a plug and play add-an-amplifier kit for factory Ford/Lincoln/Mercury stereo systems. Easy and simple installation without having to cut up or splice the factory stereo wiring. Use this adapter to add an aftermarket amplifier to your existing stereo system. 4 channel adapter that is linear from 20 to 20k hz. Adjustable, independant gain controls for each channel. An amplifier turn on wire is provided.9. Factory Radio Amp Amplifier Interface Install Adapter Wiring Wire Harness Cable
Feature
Used to add an amp or sub to your factory system.One complete piece, no need to tape wires together.
Comes with an inline converter.
Fully adjustable gain control.
See description for fitment
Description
Toyota- 4Runner (2000-2011); Camry (2000-2011); Celica (2000-2005); Corolla (2000-2011); Echo (2000-2005); FJ Cruiser (2007-2010); Highlander (2001-2010); Matrix (2005-2011); MR2 Spyder (2000-2005); Prius (2001-2008); RAV4 (2000-2011); Sequoia (2001-2011); Sienna (2000-2011); Solara (2000-2008); Tacoma (2000-2011); Tundra (2000-2011); Venza (2009-2011); Yaris (2007-2010).10. Factory Radio Add Amplifier Amp Interface Adapter Wiring Wire Harness Converter
Feature
Used to add an amp or sub to your factory system.One complete piece, no need to tape wires together.
Comes with an inline converter. Fully adjustable gain control.
Acura- TSX (2009-2012) Honda CRV (2007-2011); Fit (2007-2013); Odyssey (2008-2010)
See description for fitment
Recent Comments