Top 10 best rockford fosgate punch amplifier

Finding the best rockford fosgate punch amplifier suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.

Product	Features	Editor's score	Go to site
	Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier		Go to amazon.com
	Rockford P1000X1BD Punch 1-Channel Amplifier		Go to amazon.com
	Rockford Fosgate P400X4 Punch 4-Channel Amplifier		Go to amazon.com
	Rockford Fosgate PBR300X4 Punch BRT 300-Watt Ultra Compact 4-Channel Amplifier		Go to amazon.com
	Rockford Fosgate P1000X2 Punch 2-Channel Amplifier		Go to amazon.com
	Rockford P500X1BD Punch 1-Channel BD Amplifier		Go to amazon.com
	Rockford Fosgate Prime 1,200-Watt Class-D 1-Channel Amplifier		Go to amazon.com
	Rockford Fosgate Prime 750 Watt Class D 1 channel Amplifier		Go to amazon.com
	Rockford Fosgate R250X4 Prime 4-Channel Amplifier		Go to amazon.com
	Rockford Fosgate R400-4D 400 Watt Full-Range Class-D 4-Channel Amplifier		Go to amazon.com

Related posts:

1. Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier

Feature

300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
Cast Aluminum Heatsink with Stealth top mounted control panel
Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system

Description

The Prime R500X1D is a 500 watt mono amplifier using efficient Class-D circuit topology. This amplifier is capable of running a 2-Ohm load and includes on-board Punch Bass and remote Punch Level Control.

Rockford Fosgate performance in a small package - this Prime Series R500X1D mono amp can drive a sub with up to 500 watts RMS, so you can really feel your bass rockin'. You can use the low-pass filter and Rockford Fosgate's famous Punch boost to get the best possible bass from the sub and enclosure in your vehicle. A phase switch gets your subs firing along with your other speakers for maximum impact, while the speaker-level inputs let you hook this amp up to almost any system, even a factory stereo.

Remote PLC (Punch Level Control) 0 /180 Phase Switch Real time output and power supply thermal sensing Cast aluminum heatsink 4 Gauge power/ground connectors MOSFET power supply Over current protection Short circuit protection Muted turn on 1 Year Standard Warranty

2. Rockford P1000X1BD Punch 1-Channel Amplifier

Feature

300 Watts x 1 @ 4-Ohm / 500 Watts x 1 @ 2-Ohm / 1000 Watts x 1 @ 1-Ohm. Short circuit protection
Works with factory installed & aftermarket source units
Onboard 12dB/octave LowPass crossover & Infrasonic filter
On-board Punch EQ with +18dB boost at 45Hz
Cast Aluminum Heatsink with Stealth top mounted control panel

Description

The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers.

3. Rockford Fosgate P400X4 Punch 4-Channel Amplifier

Feature

50 Watts x 4 @ 4-Ohm 100 Watts x 4 @ 2-Ohm 200 Watts x 2 @ 4-Ohm Bridged
Works with factory installed & aftermarket source units
Onboard 12dB/octave LP/HP/AP crossover. NOTE: Use 40Hz @ 0dB (Track 5) for subwoofer amplifiers or 1kHz @ 0dB (Track 7) for full-range amplifiers.
On-board Punch EQ with +18dB boost at 45Hz
Cast Aluminum Heatsink with Stealth top mounted control panel

Description

The Punch P400X4 is a 4-channel amplifier producing 100 Watts into all four channels at 2-Ohm. The P400X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.

4. Rockford Fosgate PBR300X4 Punch BRT 300-Watt Ultra Compact 4-Channel Amplifier

Feature

Four-channel, 4-ohm (only) amplifier with 75 Watts x 4 @ 4-Ohms RMS power rating and 300 watts RMS total power
Designed for stereo front/rear systems that require little space--just 1.53 x 4.25 x 6.75 inches
High- and low-level inputs with variable 4-6 volt hi level DC offset voltage input turn-on control
Selectable 80Hz LP/AP/80Hz HP filter @ 12dB/Octave
One-year limited warranty

Description

Since day one, we have spearheaded the car audio revolution. Nothing has changed. Rockford Fosgate is still the global leader in audio innovation and your passion is our purpose. We engineer the best audio systems for your lifestyle!

5. Rockford Fosgate P1000X2 Punch 2-Channel Amplifier

Feature

300 Watts RMS x 2 @ 4-Ohms / 500 Watts RMS x 2 @ 2-Ohms / 1000 Watts RMS x 1 Bridged @ 4-Ohms (4-Ohm stable in bridged mode)
Works with factory installed & aftermarket source units. Operating Voltage 9 - 16 VDC
Crossover Controls: 50-250 Hz, 12 dB/octave
On-board Punch EQ with +18dB boost at 45Hz
Cast Aluminum Heatsink with Stealth top mounted control panel

Description

The Punch P1000X2 is a 2-channel stereo amplifier capable of producing 500 Watts into each channel at 2-Ohms. The P1000X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.

6. Rockford P500X1BD Punch 1-Channel BD Amplifier

Feature

150 Watts x 1 @ 4-Ohms, 300 watts x 1 @ 2-Ohms, 500 Watts x 1 @ 1-Ohms
Accepts High Level & RCA Level Input
Cast aluminum heatsink with Top Mount Controls
12dB/octave crossover
4 Gauge power/ground connectors

Description

The Prime R500X1D is a 500 watt mono amplifier using efficient Class-D circuit topology. This amplifier is capable of running a 2-Ohm load and includes on-board Punch Bass and remote Punch Level Control.

7. Rockford Fosgate Prime 1,200-Watt Class-D 1-Channel Amplifier

Feature

Misfit power and output stages
Frequency response: 20-250 Hz
Preamp-level inputs and outputs 4-gauge power and ground leads recommended -wiring and hardware not included with amplifier

Description

New Rockford Fosgate Prime 1200 Watt Class D 1 channel Amplifier

8. Rockford Fosgate Prime 750 Watt Class D 1 channel Amplifier

Feature

Tri-stage protection covers thermal, over-current and short circuits.
On-board PEQ (Punch Equalization) with 18 dB of boost at 45Hz
Variable crossover 12dB/octave slopes
Infrasonic filter. Low-Pass: Variable 50Hz - 500Hz at 12dB/Octave
Optional Remote PEQ (Level control)

Description

New Rockford Fosgate Prime 750 Watt Class D 1 channel Amplifier

9. Rockford Fosgate R250X4 Prime 4-Channel Amplifier

Feature

RMS Continuous Power: 40 Watts x 4 @ 4-Ohms, 60 Watts x 4 @ 2-Ohms, 125 Watts x 2 @ 4-Ohms Bridged
Works with factory installed & aftermarket source units
Onboard 12dB/octave LP/HP/AP crossover
On-board Punch EQ with +18dB boost at 45Hz
Class A/B Circuit Topology

Description

The Punch P1000X2is a 2-channel stereo amplifier capable of producing 500 Watts into each channel at 2-Ohms. The P1000X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.

10. Rockford Fosgate R400-4D 400 Watt Full-Range Class-D 4-Channel Amplifier

Feature

Tri-stage protection covers thermal, over-current and short circuits
On-board peq (punch equalization) with 18 db. of boost @ 45hz
2/4 channel switch, 4 Gauge power/ground connectors.Frequency Response 20Hz to 20kHz +/-1dB
12Db/octave crossover.Low Pass Frequencies 50 - 500 Hz High Pass Frequencies 50 - 500 Hz Bass Boost Frequency 45 Hz
Top mounted controls

Description

New Rockford Fosgate Prime 400 Watt Class D 4 channel Amplifier

Conclusion

By our suggestions above, we hope that you can found the best rockford fosgate punch amplifier for you. Please don't forget to share your experience by comment in this post. Thank you!