Top 10 brushless whoop flight controller
If you looking for brushless whoop flight controller then you are right place. We are searching for the best brushless whoop flight controller on the market and analyze these products to provide you the best choice.
1. BETAFPV F4 1S Brushless Flight Controller Frsky Receiver Integrated ESC OSD Smart Audio for FPV Micro Racing Drone
Feature
The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it should be setted as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.This is a SPI Frsky receiver. Binding easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
F411 Processor can reach to 100MHz, much faster than the F3 Flight Controller with 72Mhz. Integrated with Frsky receiver only. You can click here to get the Cli Dump of Beta75pro with the FC: http://support.betafpv.com/support/solutions/articles/27000050395-cli-dump-of-f4-1s-brushless-flight-controller-frsky-version
Firmware version: betaflight_matekf411rx_3.4.0. Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode). Support Smart Audio.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Description
BETAFPV F4 1S Brushless Flight Controller Frsky Receiver Integrated ESC OSD Smart Audio for FPV Micro Racing Drone
Binding Procedure--Easier than usual. No need to click the bind button when power on.
a.Power on the board, connecting the battery or USB power. Then the green receiver LED start to flash.
b.Press the bind button for 3s. Then the green receiver LED will be solid on. It means the receiver is in bind mode and you could start to bind your radio transmitter.
Checking here: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
Specifiction
Item: F4 1S Brushless FC Frsky
Firmware version: betaflight_matekf411rx_3.4.0
CPU: STM32F411CEU6 (100MHZ, 256K FLASH)
Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection)
Size: 26mm x 26mm, compatible with the Inductrix quad frame, Beta65 Pro frame, Beta75 Pro frame, Whoop B06 frame etc
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
Weight: 4g
Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
Recommend Parts:
Frame: Beta65 Pro / Beta75 Pro frame
https://www.amazon.com/dp/B078GLW4HK
https://www.amazon.com/dp/B078H7R3PV
Props: 31mm 4-Blades / 40mm 4-blades props
https://www.amazon.com/dp/B07D7WSL3L
https://www.amazon.com/dp/B07B2P7TF4
Motors: 0703 / 0603 motors
https://www.amazon.com/dp/B079HXLJJ5
https://www.amazon.com/dp/B078N93QVP
Battery: 550mAh 1S batteries
https://www.amazon.com/dp/B078WR2FVR
Package List:
1 * F4 1S brushless flight controller
4 * M1.2x4mm screws
4 * M1.4x5mm screws
4 * Anti-vibration ruber dampers
2. USAQ Betaflight F3 Micro 6A 2S 4-in-1 Brushless ESC OSD Flight Controller Micro Cube
Feature
Built in PDB, OSD, and 4-in-1 ESC.Total weight of only 6.5g!
Ideal for 65-120mm frames.
Complete F3 flight controller-Betaflight ready!
Description
Flight Controller Specifications:Dimensions: 20*20mm
Mounting Dimensions: 16*16mm
Weight: 1.9g
Processor: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000 ( connected by SPI)
Firmware version: betaflight_3.1.0_OMNIBUS
Built-in BEC: 5V/0.5A
Receiver: PPM, Spektrum 1024/2048, SBUS, IBUS, XBUS, SumD SumH RX etc.
Power supply: 2S lipo battery ( 6.5V-8.4V)
Suitable for 60mm-80mm mini brushless FPV Quadcopter frame
ESC Specifications:
Item name: 4 In 1 6A BLHeli_S ESC
Size: 25x29mm (includes solder pad)
Mounting holes: 16x16mm, 2mm
Weight: 3g
Input voltage: 2S lipo
Con. Current: 6A
Peak Current: 10A (5S)
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G
BEC: NO
Driver: 3 in 1 MOS
Supports Dshot Oneshot multishot
Features:
-Support programmable LED Sprit (turn off transponder before using)
-Support BLheli/BLHELI_S suite Pass-through ready
-Support PPM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
-Default Dshot600
-Built-in voltage detection, alarm
-Built-in Betaflight-OSD
-Buzzer solder pin
-LED_STRIP connector
Package included:
1* Super_S F3 flight control board
1* Super_S BS06D 6A 4in1 ESC
8*M2*5+5 Nylon column
8*M2 Nuts
8*M2 Screw Requires Betaflight to Configure
Drivers required are available from Betaflight Welcome Screen.
3. BeeCore OMNIBUS F3 V1 Flight Controller Built-in OSD Integrated 5A Blheli_S DSHOT600 Brushless ESC
Feature
Firmware: betaflight_3.2.0_OMNIBUSCPU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection)
Power supply: 1S battery input (DC 3.6-4.2V)
BEC: Built-in 5V / 0.5A step-up circuit
Description
Compatible Receivers signal: PPM, SBUS, IBUS, Spektrum DSM2 / DSMX, 1024/2048.Built-in OSD interface
Active buzzer interface (with buzzer)
Support BLheli suite ESC programming
Support DHSOT ESC
Built-in voltage detection, alarm
Board size: 28.5 * 28.5MM
Screw hole spacing: 36 * 36MM diameter 3.0MM
Board weight: 2.8 g
ESC:
Power supply: 1S
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
Package Included:
1 X OMNIBUS F3 V1 Flight Controller Built-in OSD Integrated 5A Blheli_S DSHOT Brushless ESC
1 X Buzzer
1 X Power cable
4. Fusion X3 AIO Omnibus F3 Flight Controller OSD 5A 1S Blheli_S Brushless ESC Dshot600
Feature
CPU: STM32F303CCT6 (72MHZ, 256K FLASH)Sensor: MPU-6000 three-axis accelerometer / three-axis gyroscope (SPI connection)
Power supply: 1S battery input (DC 3.6-4.35V)
Built-in 5V/1A voltage booster regulation module
Receiver: PPM, SBUS, IBUS, Spektrum DSM2 / DSMX, 1024/2048.
Description
Built-in OSD interfaceActive buzzer interface (with buzzer)
Supports programmable LEDStrip
Support BLheli suite ESC programming
Support DHSOT ESC
Built-in voltage detection, alarm
Board size: 28 * 30MM
Screw hole spacing: 16 * 16MM diameter 2.5MM
Board weight: 3.1 grams
ESC:
Power supply: 1S LIPO/LIHVCurrent: 5A continuous peak 6A (for 3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Signal support: D-shot150, D-shot300, Oneshot125, Multishot, PWM
Package Included:
1 X OMNIBUS F3+4 IN 1 5A ESC1 X 5V Buzzer
1 X Power cable
5. BETAFPV Beta65X 2S Whoop Frame Kit with 2 Sets 31mm 4-Blade Props 1.0mm Shaft Blue for 65mm 2S Brushless Whoop Drone Like Beta65X BNF
Feature
Betafpv Beta65X 2S Whoop Frame is designed for 65mm 2S whoop drone, with a customed battery slot to support 2pcs 1S whoop style batteries, like 1S 260mah battery.The light and durable frame is clear plastic material only 3.6g/pcs, with a 26mm x 26mm FC mounting columns can match whoop style flight controller, like 2S F4 Brushless Flight Controller.
There are 2 sets 31mm 4-blade props 1.0mm shaft hole in this kit, can fit the 110x motors perfectly, only weighs 1.2g/set.
This frame natively support 0x0x motors, like 0802, 0705 etc. We highly recommend our Betafpv 1S 300mAh battery and 0802 brushelss motors for DIY your Beta65X 2S Brushless BNF.
Any technical support needed please contact: [email protected].
Description
BETAFPV Beta65X 2S Whoop Frame Kit with 2 Sets 31mm 4-Blade Props 1.0mm Shaft Blue for 65mm 2S Brushless Whoop Drone like Beta65X BNF
Specifications:
Frame
Material: Clear plastic
Diagonal motor to motor distance: 65mm
Motor mounting hole: for 0X0X series motors
FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern
Battery slot size: for 2pcs 1S whoop style batteries
Weight: 3.6g/pcs
Propellers
Prop: 31mm 4-blade props
Material: Clear plastic
Inner diameter: 1.0mm Shaft
Product material: Clear Plastic
Color: Blue
Weight (2CW+2CCW): 1.20(g) = 0.04(oz)
Recommend Parts:
Batteries: 300mAh 1S Lipo HV batteries -
Motors: 0X0X brushless motors, like 0802 17500KV motors
FC: Betafpv 2S Brushless FC
Package:
1 * Beta65X frame for 65mm 2S whoop drone
8 * 31mm 4-blade 1.0 shaft 2S Whoop Propellers (4CW + 4 CCW)
6. BETAFPV Beta75X 2S Whoop Frame Kit with 2 Sets 40mm 4-Blade Props 1.5mm Shaft Blue for 75mm 2S Brushless Whoop Drone Like Beta75X BNF
Feature
Betafpv Beta75X 2S Whoop Frame is designed for 75mm 2S whoop drone, with a customed battery slot to support 2S battery or 2pcs 1S battery series connection, can fit with 110x motors.The light and durable frame is clear plastic material only 7.1g/pcs, with a 26mm x 26mm FC mounting columns can match whoop style flight controller.
There are 2 sets 40mm 4-blade props 1.5mm shaft hole in this kit, can fit the 110x motors perfectly, only weighs 2.4g/set.
If order this kit, highly recommend our Betafpv 300mAh battery and 1103 brushelss motors for DIY your Beta75X 2S Brushless BNF.
Any technical support needed please contact: [email protected]
Description
BETAFPV Beta75X 2S Whoop Frame Kit with 2 Sets 40mm 4-Blade Props 1.5mm Shaft Blue for 75mm 2S Brushless Whoop Drone like Beta75X BNF
Specifications:
Frame
Material: Clear plastic
Diagonal motor to motor distance: 75mm
Motor mounting hole: for 110x series motors
FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern
Battery slot size: 11.5x16mm, for BETAFPV 300mAh battery
Weight: 7.1g/pcs
Propellers
Prop: 40mm 4-blade props
Material: Clear plastic
Inner diameter: 1.5mm Shaft
Product material: Clear Plastic
Color: Blue
Weight (2CW+2CCW): 2.40(g) = 0.08(oz)
Recommend Parts:
Batteries: 300mAh 2S Lipo HV batteries
Motors: 110x brushless motors, like 1103 11000KV motors
FC: Betafpv 2S Brushless FC
Package:
1 * Beta75X frame for 75mm 2S whoop drone
8 * 40mm 4-blade 2S Whoop Propellers (4CW + 4 CCW)
7. BETAFPV 1200TVL FPV AIO Camera with OSD 25mW 48CH FPV Transmitter VTX 1/3" CMOS Sensor Support Smart Audio for Tiny Whoop Racing Drone
Feature
BETAFPV 1200TVL HD Camera is with three highlights of High Image Quality, Lightest Weight only 2.7g without VTX, Save time on adjusting VTX.The camera can be assembled on all of the drones from BETAFPV. But we don't recommend you assemble this cam on Beta65 drone as it's too heavy to carry on.
Support Smart Audio Function and compatible with Betafpv F3 V2 Frsky, F4 Brushless Frsky FC, F4 Brushed FC(No Receiver) etc. The flight controller can communicate with the video transmitter using the audio line in. It allows the flight controller to know what frequency the vtx is using, and to change it.
BETAFPV AIO 1200TVL camera NTSC is wtih Super Image Sensor of 1/3" CMOS Sensor is only 4.2g including VTX, small size with the dimension of 14x14x16mm without camera mount.
The camera mount with 30 degree tilt is not in cluding, but you can get it here :https://www.amazon.com/dp/B07HFB3MJR. If you have a 3D printer, you can also download the STL File: http://support.betafpv.com/support/solutions/articles/27000051075-1200tvl-cam-mount-stl-file.
Description
BETAFPV 1200TVL FPV AIO Camera with 25mW 48CH FPV Transmitter VTX 1/3" CMOS Sensor FOV 160 Degree Support Smart Audio for Tiny Whoop Racing Drone
SPECIFICATION
Smart Audio
Image Sensor: 1/3" CMOS Sensor
TV System: NTSC
Horizontal Resolution: 1200TVL
IMAGE: 16:9
Output power: 25mW
Supply Voltage: 2.9-5.5v
Size: 15*14 mm
Weight: 4.2g
Package included:
1 * BETAFPV 1200TVL FPV Camera without VTX
8. FEICHAO 75mm Indoor Brushless Whoop Racer Drone Combo Set Mini Frame Kit Crazybee ESC SE0703 Motor 4-Blades Propeller (Kit set with 1900KV motor)
Feature
The Flight Controller Compatible with Frsky Receiver, Please take it into account before ordering according to your Transmitter.If your Transmitter is Flysky Receiver, Please contact us, we will change the Crazybee F3 Flight Controller for Flysky to you.
2 Kinds of Brushless Motors are optional, SE0703 KV19000 1S Brushless Motor and SE0703 KV15000 1S Brushless Motor. Please choose the item as you want.
Description
Package included:1x Bwhoop75 75mm Wheelbase Indoor Brushless Racer Drone Frame Kit
4x SE0703 KV19000/KV15000 1S Brushless Motor
1x Crazybee F3 Flight Controller Compatible with Frsky Receiver (For Flysky Receiver optional)
1x 10Pairs 40mm 4-Blades Propellers CW CCW (Colorful)
9. BETAFPV Beta65S Lite BNF Micro Whoop Quadcopter Silverware Firmware Lite Brushed Flight Controller with 7X16mm 17500KV Brushed Motor
Feature
Supported radio transmitterBETAFPV TX01 radio transmitter; Jumper T8SG radio transmitter; Radio transmitter of toy drone like JJRC H67, Eachine E011 etc which using the Bayang protocol. If not sure whether your radio transmitter could support this FC board, please email us ( [email protected]) for help.As same as the Beta65S, more punch on throttle wth faster 716 17500KV motors and 3-blade props. BETAFPV Z01 aio 25mW vtx camera with 48 channels in total.
Built in Bayang protocol native receiver, compatible with almost radio transmitter with deviation firmware or deviration compatible transmitter module.
Support level mode and acro mode. Also it has the ability to change setting for custom builds, or to adapt to personal preferences by stick gestures.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Description
BETAFPV 65S Lite Micro Whoop Quadcopter Silverware Firmware with Lite Brushed Flight Controller
The Beta65S Lite is a new version with BETAFPV Lite brushed flight controller. Powered by silverware, much simple and much affordable. It is ready to fly and the Silverware software does not require switch setting like Betaflight does.
Specification:
Wheelbase: 65mm
Weight: 25g (without battery)
Flight Controller: BETAFPV Lite Brushed Flight Controller
https://www.amazon.com/dp/B07BBN1S62
Motor: 7X16mm 17500KV Brushed Motor
http://www.amazon.com/dp/B074MWWQHD
Receiver: Bayang protocol
Camera and 5.8G Tx AIO 520TVL 1/4 Inch Camera 25mW 40CH
Power connector: JST-PH 2.0 connector, AKA PowerWhoop connector
Battery: 3.7V 260mah Lipo battery
Flight time: 3 mins
Supported radio transmitter
BETAFPV TX01 radio transmitter
Jumper T8SG radio transmitter
Radio transmitter of toy drone like JJRC H67, Eachine E011 etc which using the Bayang protocol.
Note: If you have a Frsky Tanaris QX7/X9D radio transmitter and want to try this FC board, just plug in a MTX90 multiprotocol module and done.
Compatible multiprotocol module:
MTX-9D multiprotocol module (Suit for Frsky Tanaris QX7 X9D X9D Plus X12S, Flysky TH9X, Turnigy 9XR/9XR PRO)
Other 4in1 multiprotocol module that support the Bayang protocol
Package Included
1 * Beta65S Lite Mico FPV Quad
10. Wolfwhoop Whoop-Tower Pro OMNIBUSF4 Pro Flight Controller FC Integrated OSD and PDB and VTX 4 in 1 Super Tower for RC FPV Racing Drone Quadcopter
Feature
The wiring has been optimized, which requires less soldering steps, thus making the assembling simple and quick when used in combination with PW-010.Support 3S-4S power input, Easy and quick OSD configuring
The VTX can be configured by RC transmitter via SA, or you can change setting directly by button.
Integratedwith STM32 F405 chip, compatible with Betaflight and Cleanflight (supports DHOTS150/300/600/1200) ESC with high operating speed, which achieves excellent flight experience. Moreover, it can generate powerfulcalculatingability and velocity, gives pilots easier, more stable and smooth flight experience
Please find more information from the detailed manual:http://wolfwhoop.com/uploadfile/2018/0108/20180108040146466.pdf Feel free to contact customer service by: [email protected]
Description
4032FC flight controls features:
* the wiring has been optimized, which requires less soldering steps, thus making the assembling simple and quick when used in combination with PW-010.
* Support 3S-4S power input
* Integratedwith STM32 F405 chip, compatible with Betaflight and Cleanflight (supports DHOTS150/300/600/1200) ESC with high operating speed, which achieves excellent flight experience. Moreover, it can generate powerfulcalculatingability and velocity, gives pilots easier, more stable and smooth flight experience.
*MPU 6000 6-axis gyroscope
* 280 barometer
*Supports receivers like SBUS PPM IBUS DSM2, etc.
* Easy and quick OSD configuring.
*Reserved soldering place for Buzzer and programmable LED light.
*Support SD slot
*Size:36*36MM(FC-4032) 48*36MM(PW-0010)
*Standard flight controller installation hole size: 30.5X30.5mm
*Firmware: Omnibus F4SD 3.2.2(factorydefault)
* Integrated BEC 5V output: 5V/1.5A (max:2A)
*LED strip has already connected with A08 through short circuit in factory default setting, for future firmware upgrading, please distribute LED connector to A08 and Save. Otherwise LED strip will not work.
For example: resource LED_STRIP 1 A08 (distribute LED connector to A08 and Save)
Recent Comments