Top 10 scanners antennas for 2022

If you looking for scanners antennas then you are right place. We are searching for the best scanners antennas on the market and analyze these products to provide you the best choice.

Product	Features	Editor's score	Go to site
	A Pair Telescopic Antennas BNC Connectors for Portable Radio Scanner		Go to amazon.com
	TELESCOPIC BNC MALE SWIVEL ANTENNA WITH METAL CONNECTOR FOR PORTABLE OR BASE RADIO SCANNERS, WIRELESS MICROPHONES, REMOTE RECEIVERS, TEST EQUIPMENT, AND FREQUENCY COUNTERS		Go to amazon.com
	Firlar Scanner antenna for Uniden Motorola Radio BNC Glass Mount 4" Mobile Full Band		Go to amazon.com
	E-outstanding 7 Section Telescopic BNC Male Swivel Antenna,for TV FM Radio Scanners Remote Receivers,and Other Electronics Products		Go to amazon.com
	BNC Scanner Radio Receiver Glass Mount Wire Antenna Analog or Digital Reception includes 2 Suction Cups For Mounting On Glass in Vehicle or Home		Go to amazon.com
	Tram 1199 Glass Mount All-Band Scanner Antenna		Go to amazon.com
	Tram 1410 Broad Band Discone/Scanner Base Antenna		Go to amazon.com
	TRAM 1089-BNC Scanner Mini-Magnet Antenna VHF/UHF/800mhz-1,300mhz with BNC-Male Connector		Go to amazon.com
	ANT32 Uniden Bearcat Motorola Type Telescopic Scanner Antenna Plugs Into Back of Scanner		Go to amazon.com
	Rubber Antenna Multi-band Flexible High Gain with BNC Connector for Hand Held Scanner Radios Analog or Digital. 100 MHz to 900 MHZ bands		Go to amazon.com

Related posts:

1. A Pair Telescopic Antennas BNC Connectors for Portable Radio Scanner

Feature

Total length (body + Base): approx. 5 inches
Full extended length (body + base): approx. 16.5 inches
Replacement for Sound/Voice Machines, PA System, VHF/UHF Wireless System

Description

Telescopic Antenna BNC Connector for Portable Radio Scanner

2. TELESCOPIC BNC MALE SWIVEL ANTENNA WITH METAL CONNECTOR FOR PORTABLE OR BASE RADIO SCANNERS, WIRELESS MICROPHONES, REMOTE RECEIVERS, TEST EQUIPMENT, AND FREQUENCY COUNTERS

Feature

ANTENNA LENGTH: 7" retracted, 20" extended (or anywhere in between)
Frequency range of 25 - 1300 MHz analog or digital. Heavy duty BNC connector
Uniden Bearcat, Radio Shack, GRE, Regency, RELM, plus all brands of receivers, microphones, test equipment, radio controlled receivers which use a BNC type male antenna.
Frequency range of 25 - 1300 MHz analog or digital. . Scanner World USA - Original registered item sold and shipped only by Scanner World
PACKAGE QUANTITY INCLUDES ONE ANTENNA which has a swivel at the base that allows the BNC male connector to be moved to the correct position for use on a portable or base radio receiver, either vertical or right angle. (See photo).

Description

Covers complete frequency range of 25 - 1300 MHz with any brand or model of radio scanner or frequency counter, Analog or Digital, that uses a BNC connector. This antenna has a swivel at the base that allows the BNC male connector to be moved to the correct position for use on a portable or base radio receiver or frequency counter. Uniden Bearcat, Radio Shack, GRE, Regency, RELM, plus all brands of receivers using a BNC male antenna.

3. Firlar Scanner antenna for Uniden Motorola Radio BNC Glass Mount 4" Mobile Full Band

Feature

Connector: BNC Male
Antenna Length: 4"
Mount Style: glass mount
Receive Frequency: 30MHz - 1200 MHz
Our antenna come with BNC type connector, work with radio or scanner with BNC type connector, or use our antenna adapter to convert for other type radio use

Description

Features:
Connector: BNC Male
Antenna Length: 4 "
Cable Length: approx 5'
Mount Style: glass mount
Receive Frequency: 30MHz - 1200 MHz

4. E-outstanding 7 Section Telescopic BNC Male Swivel Antenna,for TV FM Radio Scanners Remote Receivers,and Other Electronics Products

Feature

Main Material: Steel,Brass;Sections : 7 Sections;Connector: BNC Male
Dimension: Folded:17cm/6.7";Unfolded Length: 76.5cm/30"
Mainly used for TV antenna or FM radio antenna, electric toy, remote control, VCD, and other communications antenna and other electronics products
Great replacement for your damaged TV antenna or FM radio antenna
Package Content: 1 x Telescopic BNC Male Connector Aerial

Description

Specifications:

Telescopic Antenna Q9 BNC Connector

7 section 17cm(6.7")long to 76.5cm(30") extended, have great flexibility

Diameter of Aerial:7mm,Diameter of BNC Male Connector:10mm

The diameter of the flat head bottom is 2.5mm,1.4mm thickness

Interface Type:BNC

Material:Stainless steel,Brass

Scope: Great for your damaged TV antenna or FM radio antenna, electric toy, remote control, VCD, and other communications antenna and other electronics products

Applicable effect: Enhanced intercom receiver sensitivity, increased the range of walkie exhaled. Effectively increase the intercom call effect, increase in calling distance, lets calls more clearly, calls farther distance

Package included:
1x Q9 BNC Connector Telescopic Antenna

5. BNC Scanner Radio Receiver Glass Mount Wire Antenna Analog or Digital Reception includes 2 Suction Cups For Mounting On Glass in Vehicle or Home

Feature

Use as a mobile antenna or an indoor antenna attached to an outside window for better home reception
Covers all bands. 25 - 1300 MHz. This antenna works with both digital or analog radio scanners.
Wire antenna is approximately 8 feet long.
Includes a BNC connector and suction cups to attach to glass. Wire antenna is approximately 8 feet long.
This item is an original Trademarked product of Scanner World USA, which is only available when ordered direct from Scanner World USA. BEWARE OF COUNTERFEIT PRODUCTS SOLD BY OTHER VENDORS.

Description

Covers all bands. 25 - 1300 MHz. Includes a BNC connector and suction cups to attach to glass. Wire antenna is approximately 8 feet long. or smooth metal surface. Use as a mobile antenna or an indoor antenna attached to an outside window for better home reception. . This antenna, fitted with a BNC connector, fits Uniden, Bearcat, GRE, Radio Shack, Realistic, AOR, Regency, Yupiteru, Kenwood, Yaesu, Icom, Alinco Whistler plus other brands of radio receivers using a BNC type connector. This antenna works with both digital or analog radio scanners receivers.

6. Tram 1199 Glass Mount All-Band Scanner Antenna

Feature

28 inch glass mount
Center-loaded design with extra long whip for improving signal reception
Covers 25mhz-1,300Mhz frequencies
17ft Coaxial cable with bnc Connector
28 inch glass mount
Center-loaded design with extra long whip for improving signal reception
Covers 25 mhz-13 MHz frequencies
17-Feet Coaxial cable with Banc connector

Description

The glass mount all-band scanner antenna is a 28 inch glass mount with a center-loaded design with an extra long whip for improving signal reception.

7. Tram 1410 Broad Band Discone/Scanner Base Antenna

Feature

Wideban reception covering 25/1300 MHz
Transmit bands 144-220-440-900-1290 MHz
Rust free stainless steel structure
Max power 200 Watts
SWR < 1/5:1
1 3/8" maximum mast diameter
UHF female (SO-239) connector
8 lower radials 32 3/4"
8 upper radials 11 1/4"

Description

Tram 1410 Broad Band Stainless Discone/Scanner Base Antenna 25 to1300 MHz. Discone/Scanner Base Antenna Description: Wide Band Receive from 25 to 1300 MHz. Transmit Bands: 144, 220, 440, 900 and 1200 MHz Frequency: 25 to 1300 MHz. Rust Resistant Stainless Steel Construction. 1 3/8 inch Maximum Mast Diameter required for installation (Not Included) Connector SO239 (UHF Female) Cable terminated with a PL259 connector required Max Power: 200 Watts 8 Lower Radials (32 inches) and 8 Upper Radials (10 1/2 inches)

8. TRAM 1089-BNC Scanner Mini-Magnet Antenna VHF/UHF/800mhz-1,300mhz with BNC-Male Connector

Feature

136mhz-150mhz Vhf 2.14dbi Gain
400mhz-470mhz Uhf 3dbi Gain
800mhz-960mhz 3dbi Gain

Description

Tram-Browning Inc. offers quality workmanship and materials. Their products provide exceptional performance and function thanks to expert engineering. They are proud to offer the Scanner Mini-Magnet Antenna VHF/UHF/800MHz to 1,300MHz with BNC-Male Connector.

9. ANT32 Uniden Bearcat Motorola Type Telescopic Scanner Antenna Plugs Into Back of Scanner

Feature

Antenna length: collapsed 7" - fully extended 26"
This item ANT32 is an original Trademarked product of Scanner World USA, which is only available when ordered direct from Scanner World USA. BEWARE OF COUNTERFEIT PRODUCTS SOLD BY OTHER VENDORS.
Uniden Bearcat back of scanner telescopic antenna for use with base or mobile scanners that have a Motorola type connector for models listed below. ANT32 covers all frequency bands 25 - 1200 MHz.
This telescopic antenna connects in the back of the following models of Uniden Bearcat Base and Mobile Scanners shown below in the Motorola type antenna jack.

Description

This telescopic antenna connects in the back of the following models of Uniden Bearcat Base and Mobile Scanners in the Motorola type antenna jack. Bearcat I, Bearcat II, Bearcat III, BCIII, BC3; BCA, BC3-L, BC3-H, BC3-U, BC3-L/H, BC3-L/U, BC3-H/U, Bearcat IV, BCIV, BC4, Bearcat 5, BC5, Bearcat 5/800, Bearcat 6, BC6, Bearcat 8, BC8, Bearcat 12, BC12 Bearcat 17, BC17PTL, Bearcat 15 (10 channel crystal base scanner), Bearcat 101, BC101, Bearcat 140, BC140, Bearcat 142XL, BC142XL, Bearcat 144XL, BC144XL, Bearcat 145XL, BC145XL, Bearcat 147XLT, BC147XLT, Bearcat 147XLT-1, BC147XLT-1, Bearcat 148XLT, BC148XLT, Bearcat 148XLT-1, BC148XLT-1, Bearcat 150 (base scanner), Bearcat 160, BC160, Bearcat 170, BC170, Bearcat 172XL, BC172XL, Bearcat 172XLT, BC172XLT, Bearcat 175XL, BC175XL, Bearcat 177XLT, BC177XLT, Bearcat 178XLT, BC178XLT, Bearcat 180 (base scanner), Bearcat 200 (base scanner), Bearcat 201, BC201, Bearcat 210, BC210, BC210XL, BC210XLT, BC210XW, Bearcat 20/20, Bearcat 220, BC220 (base scanner), Bearcat 211, BC211, Bearcat 244, BC244CLT, Bearcat 250, BC250 (base scanner), Bearcat 250XL, BC250XL (base scanner), Bearcat 300, BC300, Bearcat 400XLT, BC400XLT, Bearcat 560XLT, BC560XLT, Bearcat 800XLT, BC800XLT, Cobra SR900, SR901, SR925, Montgomery Ward GED836A, GED-836A, GED838A, GED-838A, GED845, GED-845, Scanner World BC400XLT. If your scanner model is not shown above, please send a question through the CONTACT page. Uniden, Electra Bearcat, Cobra, Montgomery Ward Radio Scanners, some Regency, Realistic, Radio Shack scanners have used this type of Motorola type connectors in the past. Also known as AT49, AT-49, AT183, AT-183, BATY0419001, Banana jack style. NOT ALL SCANNERS HAVE THE SAME ANTENNA CONNECTOR. MAKE SURE THAT THE PICTURE OF THIS ANTENNA MATCHES THE TYPE YOU NEED BEFORE PLACING ORDER.

10. Rubber Antenna Multi-band Flexible High Gain with BNC Connector for Hand Held Scanner Radios Analog or Digital. 100 MHz to 900 MHZ bands

Feature

This antenna operates within the 100 MHz to 900 MHZ bands. Analog or digital reception.
Multi band antenna.
Approximately 15" long with BNC connector.
For use on hand held portable radio scanners that use a BNC type connector.
This antenna is an original Scanner World product, which is only available when ordered direct from Scanner World.

Description

MULTI-BAND FLEXIBLE HIGH GAIN RUBBER ANTENNA WITH BNC CONNECTOR. Great scanner reception within the Railroad, Marine, Commercial plus Military Aircraft frequency bands. Operates within the 100 MHz to 900 MHZ bands. Police, Fire, Public Service. 1/4 Wave on 150 MHz, 1/2 wave on 440 MHz - 2.15 dBi Gain Approximately 15" long with BNC connector. Works great for transmit and receive within the Railroad, Marine, Commercial plus Military Aircraft frequency bands. Works with both Analog and Digital hand held scanner model receivers.

Conclusion

All above are our suggestions for scanners antennas. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using scanners antennas with us by comment in this post. Thank you!