Top 10 tinting lights
If you looking for tinting lights then you are right place. We are searching for the best tinting lights on the market and analyze these products to provide you the best choice.
1. iJDMTOY 12 by 48 inches Self Adhesive JDM Golden Yellow Headlights or Fog Lights Tint Vinyl Film
Feature
1 piece 12 by 48 inchesColor: JDM Gold Yellow
Self-adhesive, peel and stick
Stretchable with heat and water resistant
Easily cleansed with water and easy to remove without residual
Description
This page features one piece self-adhesive JDM golden yellow vinyl film sheet
in glossy finishing for headlights or fog lights.
The size is 12" x 48" (1' x 4'), the sheet thickness is about 0.005 inches.
when you order:
Quantity 1: 12" x 48"
Quantity 2: 2 separated pieces of 12" x 48" and so on....
Fitment:
Universal Fit. You can use this JDM golden yellow vinyl film for any headlights,
fog lights, sidemarker lights or even top part of the windshield, etc.
Simply clean the surface and apply this high quality vinyl sheet to anything
smooth surface and cut off the edge. It will not damage your lamp nor leave any
residual later when you remove this.
Please note:
It is not pre-cut to any lamp's exact shape.
2. VViViD Air-Tint Dark Black Headlight/Tail Light Window Tint (120" x 60" Bulk roll)
Feature
VVIVID Air-Tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. They include an air-release membrane which allows you to install the tint dry ( without installation liquid ) Ready to use out of the box!This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape.
This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!
Made with scratch-resistant automotive grade cast vinyl, VVIVID Air-Tints were developed in Canada to reduce the risk of shrinkage and peeling almost completely! The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights.
NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHT TINTS - THIS PRE-CUT SHEET IS 120" x 60"
Description
All headlight tints come with a subtle natural air release pattern and can be installed using either dry or wet application methods. These tint films are the first of their kind and are designed to conform to any difficult surface that would otherwise be impossible with standard headlight tints. This film is also self healing and scratches will go away with heat! USE: Simply cut vinyl to shape, apply it to surface. To make vinyl conform to shape, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!3. Headlights, Tail Lights, Fog Lights Tint Vinyl Film, Self Adhesive (Small 12''X48'', JDM Golden Yellow)
Feature
Stretchable with heat and water resistantSelf-adhesive, peel and stick
Easily cleansed with water and easy to remove without residual
Color: BLACK
Size: 12''X48''
Description
Why is headlight protection so valuable ? It has been estimated that on average 1 out of every 6 automobiles will require headlight replacement due to damage from road debris. Replacing headlight components can be an expensive and time consuming process, the average headlamp set costs $450 to replace. Plastic headlights tend to dull and lose their transparency, glass headlights tend to break and fracture as they wear. what tools do I need for install headlight tint? Vinyl Squeegee (Credit Card /w cloth wrap will work) Soft Cloth Towel Spray Bottle with soapy water Hair Dryer or a Heat Gun How to Install Headlight and Tail Light Tint film? 1. Clean the surface of the Headlight or Tail light with soap and water to ensure all debris are removed from the surface of the Tail Light. 2. Carefully remove the Overlay from the sheet and spray the overlay's adhesive side with Soap and Water. The Soap and Water will prevent the Overlay's adhesive from sticking while you apply it the Tail Light. 3. Carefully apply/align the Overlay on the Tail Light and smooth out as much crease as possible by using your fingers. Use the vinyl squeegee to push out all the soapy water on the front face of the Tail Light. The more soapy water you push out the less bubbling there will be. Note: Make sure the crease are evenly distributed on the Overlay, therefore you can easily smooth it out with a heat Gun and Squeegee. 4. Carefully pull and fold the side inward. If necessary, use the hair dryer to soften up the vinyl and squeegee out all the crease. 5. Heat up the excess vinyl (heating up the vinyl will soften it and makes it easy to trim) and trim. Note: Don't worry if you over stretch the vinyl. Any excess vinyl protruding can be easily removed using a brand new exacto knife.4. 12 by 48 Inches Self Adhesive Headlight, Tail Lights, Fog Lights Tint Vinyl Film (12 X 48, Light Black)
Feature
1 piece 12 by 48 inchesColor: light black
Self-adhesive, peel and stick
Stretchable with heat and water resistant
Easily cleansed with water and easy to remove without residual
Description
1 piece 12 by 48 inches, Color: light black. Smooth surfaceStretchablSelf-adhesive Easy removal with no residual Suitable for any headlights, fog lights, side marker lights or seven top part of the windshield.5. LED Light Bar Nilight 52Inch 300W LED Work Light Spot Flood Combo LED Lights Led Bar Driving Off-Road Lights for Off-road Vehicle, ATV, SUV, UTV, 4WD, Jeep, Boat,2 Years Warranty
Feature
BRIGHT WHITE LIGHT: Made of high-quality LED chips and PC lens with high light transmittance, the light bar can efficiently light up the dark road.EFFECTIVE PROTECTION: With IP67 waterproof rate, the light bar can effectively resist water and dust, avoiding moisture and condensation.
BETTER LIGHTING EFFECT: You can see further and have wider vision with the appropriate combination of spot beam and flood beam.
SIDE MOUNTING BRACKET: The sturdy side mounting bracket can firmly fix the light bar. It is quakeproof when passing through rugged terrain.
PACKAGE INCLUD: 1PC 52Inch LED Light Bar and Mounting Bracket.
Description
Specification: high intensity LEDs beam type: flood spot Combo beam input voltage: 9-30v DC waterproof rate: IP67 LED color temperature: 6000k-6500k working lifespan: over 30,000 hours working temperature: -40~ 60degree material: 6063 aluminum profile, high quality LED chips, pc lens.For off road use only.6. LinkedGo 60% VLT Light Blue Car Window Tinting (36inch6.5FT)
Feature
It is 2ply window tint film, not metallic film, tint non-reflective, suit for front rear side window and back window, it's not violate the US state lawsVisible light transmission 60 percent
SR Coating,Colored Film,Transparent Adhesive,Release liner
UV blocks glare, Water-Activated Adhesive
Three year warranty for car window tinting
Description
Delivery time : 3-5 days, Shipping Item: UPS Express, this product also suit for car front glass (a) MaterialPET Type2PLY Size:20inch*10FT Color:Light Blue (b) VLT:60% UV:99% (c) Easy to Install LinkedGo Auto Tints are easy to install. It's key importance is utilizing plenty of LinkedGo application solution to keep the film and window wet during installation. Do not attempt to install the film dry or with plain water. The soap water, the better. The application solution lubricates the film so you can "slide" it to the correct position. Then the solution helps to remove air, dust, and dirt when you squeegee down the film. Install when ambient temperature is between 45 and 90 degrees F and avoid direct sunlight. You have 24 hours to fix any imperfections. Simply peel back the film being careful not to tear or crease it, clean away the imperfection, and remount. After 24 hours the film is bonded to the window. Please check your state tint laws prior to purchasing. In some instances it may be beneficial to use lighter tint on the forward side windows and darker on the back side and rear windows.7. Purple Auto Car Sticker for Fog Light Headlight Taillight Film Sheet for Car Modification (12 Inch X 48 Inch)
Feature
this product is specially designed for auto modification fancier , we purpose to bring more driving fun to drivers.Fit All vehicles such as Cars, Trucks, SUVs, and etc.Suitable for office, dance hall, bar, exhibition or home use
no pollution, no noise, no electronic interference
Material: Vinyl, Self-adhesive, Stretchable, Smooth surface, Waterproof
Easy removal with no residual
Description
1. Material: Vinyl 2. Waterproof 3. Smooth surface 4. Stretchable 5. Self-adhesive 6. Easy removal with no residual 7. Suitable for any headlights, fog lights, side marker lights or seven top part of the windshield, etc. 8. Designed to fit standard E27 fittings. 9 . Suitable for office, dance hall, bar, exhibition or home use. 10. Color: There have 10 colors to choose(dark Black, light Black, Grind arenaceous black,Red, Purple, Green, Orange, yellow,Blue, light blue) 11 . Size: 12 inch x 48 inch8. 40% shade color 24 Inches by 10 Feet Window Tint Film Roll, for privacy and heat reduction
Feature
99% anti-UV rateGood heat reduction
Select any visual light transmission between 5%-50%
Can be cut for many application such as window tinting, car tinting and etc.
Description
99% anti-UV rate Good heat reduction Select any visual light transmission between 5%-50% Can be cut for many application such as window tinting, car tinting and etc.9. KAFEEK Vehicle Glass Protective Film Car Window Wrapping Tint Vinyl Installing Tool (Set of 7)
Feature
Car Automotive Window Vinyl Film Wrap Application Installation Vehicle Tinting Tools Kit SetScrape off the bubbles downright under the film, cut the film as your wanted shape.
This wrapping tool includes various squeegees that help to install any flat,curved surfaces, corners.
Window Scraper kit is portable and convenient to use, with soft squeegee, no scratched when operating.
Suitable for professional and daily use of installing automotive window tint, paint protection films and vinyls.This is about one set of Car Window Repairing Tool (including 7 tools) as the picture shown.
Description
This set is great for installing automotive window tint, paint protection films and solar film applications. They can effectively remove the air bubbles produced during the film pasting, improve the efficiency and quality of film. They are portable and convenient to use, with soft squeegee without scratch when operating.Description
-Product Type: Car Wrapping Tool Kits for Solar Film
-Material: Plastic/Rubber/Stainless Steel
-Car Compatibility: Universal
-Compatibility: Suitable for application of all types of window tint film, paint protection film, decals,solar film,wrap film
Feature:
- Durable squeegee made from high quality stainless steel/rubber/plastic
- Scrape off the bubbles downright under the film, prevent glass car body and film
- Scratch-less, no marring or marks, just smooth motions that easily glides across vinyl films and painted surfaces
- Lightweight makes it easy to use and store in smaller spaces,Convenient to use
- 7pcs in one set. Complete tool kit for film installation. No other tools required
Package included:
1 Set (7 Pieces) as below:
1 x Rubber jelly squeegee with Handle
1 x Black conqueror squeegee
1 x 4" blue squeegee with Fabric Felt
1 x Pink Lil Chizler scraper
1 x Stainless steel knife with 10 Blades
1 x yellow contour squeegee
1 x 6" white Block Squeegee
Why choose us
*Hign-quality and durable
*Professional packaging protection
*7 days no reason return
*1-year warranty for any quality problem
*Please feel free to contact us if you have any question.It's our pleasure to answer your question.
10. 7MO Vehicle Vinyl Film Tool Kit for Car Wrapping 1 Set
Feature
Professional vinyl wrap squeegee tool kitDurable felt edge squeegee great for car vinyl wrapping
Vinyl cutter perfect for all vinyl applications
Retractable knife with snap off blades to maintain a sharp edge for precision cutting.
Perfect comfort handy grip knife to have at home, garage, office, or warehouse.
Description
Car Wrap Vinyl Tools100% Brand new and high quality
Specification:
1. Product Type:Car Vinyl Wrap Tool Kit
2. Material:Plastic/Stainless Steel
3. Color: Blue squeegee / Orange Cutter/Knife/10 Blades
4. Compatibility: Suitable for application of all types of window tint,decals,signs, wrap film and car vinyl cutting
Package Included:
1 Set (4 Pieces) as below:
1 x Blue medium-hard professional squeegee with self adhesive felt edge
1 x Orange Snitty Vinyl Cutter
1 x Knife
1 x 10 Blades
Features:
A.Super Squeegee Sleeve--high performance pro-grade squeegee pad
B.Squeegee with felt edge:
Firmly and durable.
This Squeegee tool is widely used in pad pasting, wallpaper pasting, glass cleanning and vehicles vinyl removal.
Perfect for all vinyl applications and won't scratch during installation.
Convenient to use.
C.Snitty Vinyl Cutting Knife:
Ideal for use in the warehouse or by sign makers and wide format printers.
The standard razor blade is encased in the plastic holder which allows excess film to be cut safely around a vehicle.
D.Knives:
Standard light duty multi-cartridge utility knife with 9 mm snap off blades. Heavy duty ABS grip. Good for professional window tinting, car wrapping and sign making.
E.Blades:
This type of blade is sharp and perfect for technical trimming on corners and hard to access areas.
Notice for vinyl cutting tool:
Before use it please reset the blades in correct track
Also press the blade lock to the bottom in order to FIXED BLADE
Using Carefully to prevent it to move from small gap and get your hurt
Recent Comments