Top 10 tunnel ram for 2022
If you looking for tunnel ram then you are right place. We are searching for the best tunnel ram on the market and analyze these products to provide you the best choice.
1. Edelbrock 7110 Street Tunnel Ram Intake Manifold
Feature
Network of passages that direct air or air-fuel mixture from the throttle body to the intake ports in the cylinder headEngine breathing is enhanced if the intake manifold is configured to optimize the pressure pulses in the intake system
Single-plane, high-rise, dual-quad design delivers excellent mid-range torque and outstanding horsepower from 3,500 RPM up to 7,500
Great for engines with slightly modified heads
Top has vacuum outlet for power brakes
Description
The Edelbrock Street Tunnel Ram Intake Manifold is designed for operating below 7,500 RPM where low-end torque is not a prime factor. Engine breathing is enhanced if the intake manifold is configured to optimize the pressure pulses in the intake system. It is great for engines with slightly modified heads. They are applicable to all street machines, street rods, pro-street cars and marine applications. Their single-plane, high-rise, dual-quad design delivers excellent mid-range torque and outstanding horsepower from 3,500 RPM up to 7,500. The top has a vacuum outlet for power brakes. Carburetor center to carburetor center is 8.875.2. Gasser Style Competition Air Scoop for Blown/Tunnel Ram Engine-Plain
Feature
This Hilborn-style scoop is just the finishing touch for that blown or tunnel ram engineAir cleaner scoop is designed to be used with two 4 barrel dual quad carbs with a 5-1/8" neck
Can be used on single 4 barrel applications if the scoop will be above the distributor
Description
This Hilborn-style scoop is just the finishing touch for that blown or tunnel ram engine. This air cleaner scoop is designed to be used with two 4 barrel dual quad carbs with a 5-1/8" neck, but it can be used on single 4 barrel applications if the scoop will be above the distributor and is centered over the carb. Available in: Plain - raw, unfinished casting Black - wrinkle coated PolishedApproximate measurements are 20" long, 9-1/2" wide and 6" tall. Includes air filters, mounting plates and hardware. 925-11900 Instructions (PDF) Note: Carb center spacing can be no wider than 9-1/4".3. Polished Gasser Style Competition Air Scoop-Blown/Tunnel Ram Engine
Feature
This Hilborn-style scoop is just the finishing touch for that blown or tunnel ram engineAir cleaner scoop is designed to be used with two 4 barrel dual quad carbs with a 5-1/8" neck
Can be used on single 4 barrel applications if the scoop will be above the distributor
Description
This Hilborn-style scoop is just the finishing touch for that blown or tunnel ram engine. This air cleaner scoop is designed to be used with two 4 barrel dual quad carbs with a 5-1/8" neck, but it can be used on single 4 barrel applications if the scoop will be above the distributor and is centered over the carb. Available in: Plain - raw, unfinished casting Black - wrinkle coated PolishedApproximate measurements are 20" long, 9-1/2" wide and 6" tall. Includes air filters, mounting plates and hardware. 925-11900 Instructions (PDF) Note: Carb center spacing can be no wider than 9-1/4".4. Edelbrock 7115 Street Tunnel Ram Intake Manifold
Feature
Includes a vacuum outlet for power brakesDesigned for big block engines
Power band ranges between 3,500 7,500 RPM
Measures 10.63" in height, and port dimensions measure 1.89 tall x 1.56 wide
Description
Edelbrock Street Tunnel Ram Intake Manifolds are designed for big block engines and the power band ranges between 3,500 to 7,500 RPM. These manifolds measure 10.63 inch in height, and port dimensions measure 1.89 tall by 1.56 wide.5. JEGS 15790 In-Line Tunnel Ram Linkage Kit
Feature
Made in the USADescription
In-Line Tunnel Ram Linkage Kit6. Enderle 71-1000 BBC TUNNEL RAM LINKAGE
Feature
ENDERLE71-1000
Carburetor Linkage Kits
Description
Enderle#71-1000 Throttle Linkage Kit, Dual Quad, Tunnel Ram, Sideways Mount, Chevy,Big Block, Holley, Edelbrock, Quick Fuel, Kit. These high quality Enderle tunnel ram throttle linkage kits feature splined shafts, black anodized aluminum linkage arms, left and right adjustable heim joints and hex shaped aluminum linkage rods. They are built for maximum strength and adjustability. Designed to fit standard 4150 style carburetors or 4500 Dominator series carburetors when mounted sideways. Installation instructions included.7. (2) Chrome Velocity Stacks Washable Air Filter 2x4 Carburetor Blower Tunnel Ram
Description
These velocity stacks are perfect for blower and tunnel ram applications. They come with base for 5-1/8" carburetors and adapter for 4-3/16" carburetors. Includes mounting stud.8. Enderle 72-2000 SBC TUNNEL RAM LINKAGE
Feature
Enderle 72-2000 SBC Tunnel Ram LinkageProduct Dimension (LxWxH): 13.8x4.3x2.3
Description
Enderle 72-2000 SBC Tunnel Ram Linkage . Product Dimension (LxWxH): 13.8x4.3x2.3.9. Edelbrock 7071 Side Mount Throttle Linkage Kit
Feature
Great for engines with slightly modified headsApplicable to street machines, street rods, pro street and marine
Effective method for the control of high velocity mixture flow
Adjustable forward mount style that allows to dial in the required amount of throttle
Designed for small block vehicles
Description
The Edelbrock Throttle Linkage Kit is designed for dual carburetor equipped street tunnel ram manifolds. It works with sideways mounted carburetors in vehicles operating below 7,500 RPM where low-end torque is not a prime factor. The distance from carburetor center to carburetor center should be 8.88 and the manifold top with bottom height should be 9.25. It does not fit raised port cylinder heads.10. Pro-Filer 187-9 Hitman Tunnel Ram 9.8 Deck Height Intake Manifold
Feature
PROFILER PERFORMANCE PRODUCTS 187-9 BBC Hitman Tunnel Ram Intake Manifold 9.8 DHDimensions in Inches (LxWxH): 24.3 x 24.3 x 10.1
Recent Comments