Top 10 weed wacker brush blade
If you looking for weed wacker brush blade then you are right place. We are searching for the best weed wacker brush blade on the market and analyze these products to provide you the best choice.
1. Grass Gator 4680 Brush Cutter Extra Heavy Duty Replacement Trimmer Head
Feature
Will fit 99-percent of all straight shaft gas trimmersIt is designed for heavy duty, commercial grade, gas trimmers with engines of 25-cc or more
The grass gator heavy duty is excellent for both grass, weeds, and heavy brush
Description
Grass Gator #4680 Brush Cutter Extra Heavy Duty Replacement Trimmer Head Made in USA2. Wisamic 10" 80T Carbide Blade Tip with Washer Brush Cutter Trimmer Weed Eater Blade (2)
Feature
Carbide tipped blade is estimated to last about 10 times longer than plain steel.More teeth creates more aggregate cutting surfaces for longer lasting durability.
Carbide Tipped Trimmer Brushcutter Blade-80 Teeth. Comes with 2 pieces with 2 washers which is for fit for 8" blade diameter.
Universal fit. Arbor Bore Size: 25.4mm (1")or 20mm(0.8"). Blade Diameter: 255mm (10")/203mm(8")
Suitable for cutting brush and grass.
Description
FeatureIt fits any garden trimmer, brush cutter, weed eater that takes 1" (25.4mm)or 0.8"(20mm).
Carbide is reputed to be one of the hardest-strongest alloys.
This Blade fits most Brush Cutters on the Market. Specification
Material: Carbide
Arbor Bore Size: 25.4mm (1")/0.8"(20mm) (by using the wahsers)
Blade Diameter: 255mm (10")/203mm(8") (by using the wahsers) Package content
2 x 80 Teeth Carbide Brush Cutter Blade
2 x Washer Note
1. Please use protective gloves when fitting.
2. Please refer to the owner's manual of your trimmer / brush cutter / week eater and our product description to determine whether our blades will fit your tools.
3. 2pk-8"-80t -- Multi-Use Brush Specialty -- RENEGADE BLADE - Carbide Brush Cutter weed eater Blades, 203mm diameter
Feature
Pack of {2} -- Carbide Tipped Trimmer Brushcutter Blades 8" diameter - 80 Teeth brazed-weldedNew Reducter Washer is NOW the exact thickness of blade neasure with caliper and see plus it smashes when tightened down so if it loosens it is not due to the washer. and smashes when tightened. Carbide lasts apx. 10x longer than plain steel
Our blades will blow away any 40 tooth blade, after all we offer over
twice as much carbide due to over double the teeth. Test and see.!!!
a 40 tooth jagged blade will seize in a tree limb, ours will not...
Description
UNIVERSAL FIT: ***NEW Thinner Reducer Washer***. You can measure "Washer" thickness with a Caliper, the Washer is the exact thickness of the blade and will even smash somewhat when firmly tightened. This blade will fit any Trimmer-Brush cutter that takes a 1" = 25.4mm or 7/8" = 20mm arbor. Our blade is built for any RPM even super high RPM Trimmers (10,000+ rpm). Manufactured with a more flexible steel as compared to the much more brittle steel found with table saw blades (table saw blades can shatter if they hit an obstacle, plus they are only built for approx. 3,450 rpm so they should never be used with Gasoline powered Garden Trimmers). The carbide tips are welded-brazed on and will not come off.--- NOTE: sorry, but we have NO answers regarding your particular Trimmer/brush cutter. It is up to you to determine whether: (1) a Blade can even be attached to your Trimmer. (2) what blade attachment hardware is available for your Trimmer such as: fittings, blade guards, or attachments. (3) The arbor size it takes. This is the hole in the middle of the blade, sizes we offer are mentioned above and are the most standard in the industry. (4) Our blades will outperform any 40 tooth blade, as we offer over twice the aggregate cutting surface due to Two or Three times as many CARBIDE teeth. More Carbide for the same buck means VALUE and DURABILITY. (5) NOTE: Jagged teeth do nothing since at high RPM's, cutting material does not sink into teeth cavities, and less teeth are prone to tearing cuts with lots of seizing in limbs... only the outer teeth tips do the cutting, our blades are the smoothest cutting in the industry. Try pruning a hedge with a 40 tooth then try ours, you will see what we are saying. The CARBIDE MIX in our teeth is 2nd to none, take the test challenge. Just Tungsten is not enough; additives like: Hafnium, Tantalum, Titanium, Molybdenum, Silicone, Zirconium, Boron, Niobium, Chromium, & Vanadium, make for a better Carbide Mix for longer lasting teeth.4. Wisamic 10" 60T Carbide Blade Tip with Washer Brush Cutter Trimmer Weed Eater Blade-2 Pack
Feature
Carbide tipped blade is estimated to last about 10 times longer than plain steel.More teeth creates more aggregate cutting surfaces for longer lasting durability.
Carbide Tipped Trimmer Brushcutter Blade-60 Teeth. Comes with 2 pieces with 2 washers which is for fit for 8" blade diameter.
Universal fit. Arbor Bore Size: 25.4mm (1")or 20mm(0.8"). Blade Diameter: 255mm (10")/203mm(8")
Suitable for cutting brush and grass.
Description
FeatureIt fits any garden trimmer, brush cutter, weed eater that takes 1" (25.4mm)or 0.8"(20mm).
Carbide is reputed to be one of the hardest-strongest alloys.
This Blade fits most Brush Cutters on the Market. Specification
Material: Carbide
Arbor Bore Size: 25.4mm (1")/0.8"(20mm) (by using the wahsers)
Blade Diameter: 255mm (10")/203mm(8") (by using the wahsers) Package content
2 x 60 Teeth Carbide Brush Cutter Blade
2 x Washer Note
1. Please use protective gloves when fitting.
2. Please refer to the owner's manual of your trimmer / brush cutter / week eater and our product description to determine whether our blades will fit your tools.
5. Renegade Blade 2pk-8"-(1) 32 teeth & (1) 80 teeth COMBO 2 Blade Pack Carbide Brush Cutter weed eater Blades - (1) BRUSH & (1) MULTI-use blade pack - 203mm diameter
Feature
Pack of {2} -- 8" COMBO SPECIALTY PACK -- Carbide Tipped Trimmer Brush cutter Blades, (1) 32 Tooth & (1) 80 toothBLADE ATTACHMENT PARTS: Our blades are "Universal Fit" provided you FIRST acquire "Blade Kit" parts for your Trimmer model, (we don't sell these parts). IMPORTANT>> A blade does {NOT} fit directly on the tiny 5/16" axle that the "String Spool" screws onto, ALL string trimmers require some type of blade mounting parts (normally 2 small discs, nut, and cotter pin) to run a blade (YouTube can show this). We offer TWO arbor sizes: 25.4mm (same as 1") & also 20.0mm with reducer washer.
CARBIDE -- is estimated to last 10x longer than plain steel but does not cost 10x more creating incredible value. The CARBIDE MIX in our teeth is proprietary and 2nd to none.
FIVE BLADE TYPES -- All 5 specialty types of blades we offer are as follows: (1) RSB. multi-use: 8-80t, 9-100t, 10-120t... (2) RSB. brush & brambles: 8-32t, 9-36t, 10-40t... (3) Red RAZOR Hybrid combination blade: 8-56t, 9-68t, 10-80t... (4) Green VIPER Hybrid brush & brambles: 8-44t, 9-48t, 10-52t... (5) Blue HAWK Hybrid brush only: 8-20t, 9-20t,10-20t
RENEGADE BLADE is the ONLY Carbide Brush Blade BRAND on Amazon that has a {REPORT} from the foremost Testing Laboratory: UL, LLC.
Description
(1)---UNIVERSAL FIT -- each of our blades will fit either 25.4mm Arbor (same as 1") or a 20mm Arbor with included "reducer washer" with YOUR "Blade Hardware". (2)--- IMPORTANT |BLADE HARDWARE: A Blade will {not} fit onto the Trimmer Axel Shaft by itself like the String Line Dispenser Spool will, so you must acquire "Blade Hardware" (mounting adapter kit or parts) that consists typically of two small discs; one has a raised circle on it that the blade hole (arbor) fits onto, the 2nd small disc is the cap disc, then screw on the Nut and apply a Cotter Pin. Sorry, we DO NOT supply blade hardware. (3)--- CARBIDE MIX in our teeth is proprietary and 2nd to none. Just Tungsten is not enough; additives like: Hafnium, Tantalum, Titanium, Molybdenum, Silicone, Zirconium, Boron, Niobium, Chromium, & Vanadium, make for a better Carbide Mix for longer lasting teeth. (4)--- ULTRA HIGH RPM: Our blade is built for any RPM even super high RPM Trimmers (10,000+ rpm). Manufactured with a more flexible steel as compared to the much more brittle steel found with table saw blades (table saw blades can shatter if they hit an obstacle, plus they are only built for approx. 3,450 rpm so they should never be used with gasoline powered Garden Trimmers. (5)--- RENEGADE BLADE is the ONLY Carbide Brush Blade BRAND on AMAZON that has a {REPORT} from the foremost Testing Laboratory: UL, LLC. (6)--- CHOOSING THE CORRECT BLADE: Blades line up on a polarity scale with maximum TEETH on one end [for CUT] all the way to maximum CAVITIES [for GRAB] on the other end. EXAMPLE: Wood tree limbs require more teeth and no cavities, and wispy flexible brush or grass requires maximum grab as teeth alone just pushes grass over without cutting. THEREFORE: You must pick a {Teeth & Cavity Pattern} that best suits your material being cut. We offer blades to handle any: Wood, Bushes, Brambles, Hedging, Brush & Grass.6. WW Brush Cutter
Feature
Universal fit for 99 percent of all gas straight shaft trimmersIdeal for cutting thick weeds and brush
Uses 3 replaceable and durable metal blades that meet ANSI safety standards
This is a Weed Warrior replacement part
Part Number 16246B
This is an aftermarket of generic part
Description
The Brush Cutter replacement trimmer head is equipped with durable metal blades to easily cut thick weeds and brush. Plus, it's universal and will fit most gas straight shaft trimmers.7. 12" x 3 Teeth Steel Brush Cutter, Trimmer, Weed Eater Blade
Feature
It fits either 1" (25.4 mm) or 20 mm arborGreat for cutting brushwood, bushes, densely grass
Diameter: 300 mm (12 inches)
Thickness: 3.0 mm
Description
This Heavy duty brush cutter blade is designed for cutting and clearing heavy weeds and underbrush, Use a flat file for sharpening.8. Forester Chainsaw Tooth 9" Brush Blade
Feature
Warning: Please keep in mind that all safety gear should be used when ripping through brush like crazy.I don't want to get anyone hurt. I would recommend our Heavy Duty Leg Protectors
Use Eye Protection!
Description
Forester Chain Saw Tooth BrushCutter Brush Grass Blade 9" Fits Most Gas and Electric Trimmers 9" X 1" Arbor 20 MM Bushing Included 10000 Max RPM Ideal for all brush cutting applications. Saw chain cutters are easily sharpened with a round file. Fits most brush cutters 30cc and Up. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.9. Forester Chainsaw Tooth 9" Brush Blade with 3/16" Round File 2 Piece Bundle
Feature
2 Piece Bundle Including 1 9" Brush Blade and 1 3/16" (.325" pitch) Round FileWarning: Please keep in mind that all safety gear should be used when ripping through brush like crazy
The max speed is 10,000 Rpm's and I would recommend our Heavy Duty Leg Protectors and Eye Protection!
Sharpening File Included and you will be able to sharpen the teeth with a round file for years of use!
This blade is very easy to use on a trimmer with a 1" arbor; The blade has 20 Teeth.
Description
This blade is for use on straight shaft trimmers only , not for use on curved machines. If you want a wider range of files to choose from for sharpening all your tools look for our Premium Chainsaw Sharpening Kit Fits All Models 8 Piece Bundle or 9 Piece Bundle Including a Vise!10. Forester Chainsaw Tooth 7" Brush Blade
Feature
Forester Chainsaw Tooth 7" Brush Blade1" Center hole with spacer to convert to 20mm
Use 7/32 round file (not included)
Warning: Please keep in mind that all safety gear should be used when ripping through brush like crazy
Recent Comments