Top 9 recommendation proximity sensor for arduino for 2022
When you looking for proximity sensor for arduino, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable proximity sensor for arduino is not an easy task. In this post, we show you how to find the right proximity sensor for arduino along with our top-rated reviews. Please check out our suggestions to find the best proximity sensor for arduino for you.
1. kuman 5pcs Hc-sr04 Ultrasonic Distance Measuring Sensor Module kit for Arduino UNO Mega R3 Mega2560 Duemilanove Nano Raspberry Pi 3 Robot K18
Feature
Update new version: Add 3 items as gift: 1*HC-SR04 Bracket + Male to Femal jump wires 20pin +10*cable ties for fixing HC-SR04Ranging distance: 2cm~450cm.High precision: up to 0.3cm.Effectual angle:15 degree.Module precision:blind spots (2cm)-SUPER CLOSE
Power supply :5V DC. Quiescent current : <2mA.Size : 4.5 x 2.5 x 1.5 cm / 1.8x 1 x 0.59inch (L*W*T)
Automatically send eight "40 kHz "and detect whether there is a pulse signal back.
Mode of connection:4 pins VCC, Trig (control side), echo (receiver), out (empty),GND
Description
Feature:There are 4 pins out of the module: VCC , Trig(control side), Echo(receiver),out (empty) GND .So it's a very easy interface for controller to use it ranging.
The all process is : pull the Trig pin to high level for more than 10us impulse , the module start ranging ; finish ranging , If you find an object in front , Echo pin will be high level , and based on the different distance,it will take the different duration of high level. So we can calculated the distance easily:
The test distance = (Duration of high level * speed of sound (340M/S))/2
Module details:
Voltage: DC5V;
Static current: Less than 2mA;
Output signal: Electric frequency signal, high level 5V, low level 0V;
Sensor angle: Not more than 15 degrees;
Detection distance: 2cm-450cm;
High precision: Up to 0.3cm;
Package includes:
5* HC-SR04 Ultrasonic Distance Sensor
1*HC-SR04 Bracket
1*Male to Femal jump wires 20pin
10*cable ties for fixing HC-SR04
2. Elegoo HC-SR04 Ultrasonic Module Distance Sensor for Arduino UNO MEGA2560 Nano Robot XBee ZigBee, Set of 5
Feature
Ultrasonic hc-sr04 distance measuring transducer sensorHC-SR04 consists of ultrasonic transmitter, receiver, and control circuit. When trigged it sends out a series of 40KHz ultrasonic pulses and receives echo from an object.
~Power supply: 5V DC; quiescent current: less than 2mA; effectual angle: less than 15; distance: 2cm500cm; resolution: 0.3 cm~
Package Content: 5pcs HC-SR04 with a little gift
Description
Elegoo Inc. is a professional manufacturer and exporter that is concerned with the design, development production and marketing of arduino, 3d printers, raspberry pi and STM32.
Our Dream is to make the best price and best quality produce for customers.
So we would like to receive your valuable suggestions for our products and we can improve them for you.
Ultrasonic HC-SR04 Distance Measuring Transducer Sensor
HC-SR04 consists of ultrasonic transmitter, receiver, and control circuit.
When trigged it sends out a series of 40KHz ultrasonic pulses and receives echo from an object.
The distance between the unit and the object is calculated by measuring the traveling time of sound and output it as the width of a TTL pulse.
power supply :5V DC
quiescent current : <2mA
effectual angle: <15
ranging distance : 2cm 500 cm
resolution : 0.3 cm
Package including:
5 pcs in the Antistatic Resealable Bag
gift : 10pcs female to male cable
3. Keywish 5PCS HC-SR04 Ultrasonic Module Kit Distance Sensor for Arduino UNO Mega R3 Mega2560 Nano Duemilanove Nano Raspberry Pi 3 Robot
Feature
Ultrasonic HC-SR04 Distance Measuring Transducer Sensor Module: using IO trigger for at least 10us high level signal.HC-SR04 consists of ultrasonic transmitter, receiver, and control circuit. When trigged it will sends out a series of 40KHz ultrasonic pulses automatically and receives echo from an object. The distance between the unit and the object is calculated by measuring the traveling time of sound and output it as the width of a TTL pulse.
The HC-SR04 arduino ultrasonic sensor can send eight 40 KHZ and detect whether there is any pulse signal back. If it back, a high level signal will be outputed by IO, and the duration of the signal is the time from sending ultrasonic to returning.
Ranging distance: 2cm~450cm. High precision: up to 0.3cm. Effectual angle:15 degree. Module precision: blind spots (2cm)-SUPER CLOSE.
HC-SR04 Power supply: 5V DC; Quiescent current: <2mA; Size : 4.5 x 2.5 x 1.5 cm / 1.8x 1 x 0.59inch (L*W*T).
Description
Specifications: Power Supply:5V DC; Quiescent Current: <2mA; Effectual Angle: <15; Ranging Distance : 2cm - 500 cm; Resolution: 0.3 cm; Output Signal: Electric frequency signal, high level 5V, low level 0V; Mode of Connection: VCC/trig(T)/Echo(R)/GND (VCC supply 5V, and GND is ground wire. TRIG is trigger control signal input, ECHO is echo signal output). Feature: There are 4 pins out of the module: VCC, Trig(control side), Echo(receiver),out (empty) GND. It's an easy interface for controller to use its range. The all process is: pull the Trig pin to high level for more than 10us impulse , the module start ranging. Finish range, if you find an object in front , Echo pin will be high level, and based on the different distance, it will take the different duration of high level. So we can calculated the distance easily. The test distance = (Duration of high level * speed of sound (340M/S))/2 Package includes: 5 X Ultrasonic Sensor Module 10 pin X female to male cable Attention: 1.The module should be inserted in the circuit before power on, avoiding it works in a high level. 2.The module should not connect with power directly, if connect, the GND terminal should connect with the module first, or the module would not work fine. 3.When test objects, the range of area should not less than 0.5 square meters and the plane should as smooth as possible, otherwise, it will affect the results of measuring.4. Gowoops 5PCS HC-SR04 Ultrasonic Module Distance Measuring Transducer Sensor for Arduino
Feature
Use IO port TRIG to trigger ranging. It needs 10 us high level signal at least.Module can send 8 pro 40 kz square wave automatically, and will test if there is any signal returned.
If there is signal returned, output one high level signal via IO port ECHO. The duration of the high level signal is the time from transmitter to receiving with the ultrasonic.
Testing distance =duration of high level*sound velocity(340m/s) / 2
Static Current(Max) : 2mA ;Electrical Level Output : 5V High; Detection Distance : 2cm-450cm;High Precision: : 2mm
Description
Module main technical parameters:Working Voltage : 5V(DC)
Static current: Less than 2mA.
Output signal: Electric frequency signal, high level 5V, low level 0V.
Sensor angle: Not more than 15 degrees.
Detection distance: 2cm-450cm.
High precision: Up to 0.3cm
Input trigger signal: 10us TTL impulse
Echo signal : output TTL PWL signal
Mode of connection: VCC/ trig(T)/ Echo(R)/ GND (VCC supply 5V, and GND is ground wire. TRIG is trigger control signal input, ECHO is echo signal output.)
Quantity: 5PC
Package Content:
5X Ultrasonic Module HC-SR04 Distance Measuring Transducer Sensor for Arduino
5. HC-SR04 Ultrasonic Sensor Distance Module (5pcs) for Arduino UNO MEGA2560 Nano Robot XBee ZigBee by ElecRight
Feature
HC-SR04 Ultrasonic Sensor Distance Module: using IO trigger for at least 10us high level signalThe hc-sr04 arduino ultrasonic sensor can send eight 40 kHz and detect whether there is any pulse signal back.If it back, a high level signal will be outputed by IO, and the duration of the signal is the time from sending ultrasonic to returning
Hc-sr04 Test Distance : high level time velocity of sound (340M/S) /2
Hc-sr04 Power Supply : 5V DC; Quiescent Current : <2mA,; Effectual Angle: <15 ; Detection Distance : 2cm~500 cm; Resolution : 0.3 cm
Package Content: 5pcs HC-SR04 in the antistatic resealable bag with a gift
Description
ElecRight as a professional electronic manufacturer and exporter, looking forward to receiving your valuable suggestions of our products, we will try our best to make you satisfied.
HC-SR04 Ultrasonic Sensor
Power Supply :5V DC
Quiescent Current : <2mA
Effectual Angle: <15
Ranging Distance : 2cm - 500 cm
Resolution : 0.3 cm
Mode of Connection: VCC/ trig(T)/ Echo(R)/ GND
(VCC supply 5V, and GND is ground wire. TRIG is trigger control signal input, ECHO is echo signal output.)
Quantity: 5pcs
Attention:
The module should be inserted in the circuit before been powered to avoid producing high level of misoperation; if producted, power it again.
The module is not suggested to connect directly to electric, if connected electric, the GND terminal should be connected the module first, otherwise,it will affect the normal work of the module.
When tested objects, the range of area is not less than 0.5 square meters and the plane requests as smooth as possible, otherwise ,it will affect the results of measuring.
6. SunFounder 5 pcs Ultrasonic Module HC-SR04 Distance Sensor for Arduino UNO MEGA R3 Mega2560 Duemilanove Nano Robot Rapsberry Pi 3 B+, 2 & RPi Model B+ XBee ZigBee
Feature
Ultrasonic hc-sr04 distance measuring transducer sensor, it consists of ultrasonic transmitter, receiver, and control circuit.HC-SR04 Ultrasonic Sensor Distance Module: using IO trigger for at least 10us high level signalWhen triggered it sends out a series of 40KHz ultrasonic pulses and receives echo from an object.
Hc-sr04 Test Distance following formula: L = 1/2 T C ( L is the distance, T is the time between the emission and reception, and C is the sonic speed)
Power Supply : 5V DC; Quiescent Current : <2mA,; Effectual Angle: <15 ; Detection Distance : 2cm~450 cm; Resolution : 0.3 cm
Package Content: 5 HC-SR04 Ultrasonic Sensors , 10 Female-Male Dupont Cables , 10 Female-Female Dupont Cables , 1 Exquisite package box
Description
IntroductionThe SunFounder HC-SR04 Ultrasonic Ranging module includes an ultrasonic transmitter, receiver and circuits. It has 4 pins: VCC, TRIG, ECHO and GND. The anti-reverse pin header onside makes it easy to connect and apply.
As for the ranging principle, it is quite simple to understand: pull up the pin Trig to High thus providing high level signals of at least 10us, so the module starts to detect and measure the distance; if an object is detected, the ECHO pin will be High, and the duration of it being High depends on the distance detected, thus giving the distance calculation formula: Distance = Duration of High ECHO * Speed of sound (340m/s)/2.
For more details, visit http://wiki.sunfounder.cc/index.php?title=Ultrasonic_Module
Specifications
Operating voltage: 5V
Working current: 16mA.
Weight: 90g;
Dimensions: 46 x 20.5 x 19.5 mm (thickness of anti-reverse pin socket included)
Component List
5 HC-SR04 Ultrasonic Sensors
10 Female-Male Dupont Cables
10 Female-Female Dupont Cables
1 Exquisite package box
7. Smraza 5pcs Ultrasonic Module HC-SR04 Distance Sensor with 2pcs Mounting Bracket for Arduino UNO MEGA R3 Mega2560 Duemilanove Nano Robot XBee ZigBee S03
Feature
Test mode :Using IO trigger for high level signal.( Not less that 10us),The Module sends eight 40 kHz automatically and detect whether there is a pulse signal back.The detection zone: 0.78~196 in/ (2cm~500cm); High precision: up to 0.12 in/(0.3 cm) Effectual angle: less than 15
Power supply: 5V DC; Quiescent current: less than 2mA.
Test distance = ((Duration of high level)*(Sonic :340m/s))/2
Package included: 5pcs HC-SR04+ 2pcs Mounting Bracket(support HC-SR04 only)
Description
If you need more information, please contact us via email to get support.Parameters:
1. Use voltage: DC5V
2. Quiescent current: less than 2mA
3. level output: high 5V low 0V
5. Induction angle: no more than 15 degrees
6. Detection range: 0.78~196 in/ (2cm~500cm)
7. High accuracy: up to 0.12 in/(0.3 cm)
8. Connection mode: VCC, trig (control), echo (receiving end), GND ground wire
Module working principle:
Pull the Trig pin to high level for more than 10us impulse, the module start ranging.
The module automatically sends eight 40KHz square wave to detect whether a signal is returned.
Finished ranging, If you find an object in front, Echo pin will be high level, and based on the different distance, it will take the different duration of high level.
So we can calculated the distance easily.The distance = ((Duration of high level)*(Sonic :340m/s))/2
Dimensions: 1.3 x 0.4 x 0.1 inch/3.03 x 1 x 0.25 cm (L*W*H)
Package included:
1) HC-SR04 Distance Sensor x5
2) Cartoon Mounting Bracket(Support HC-SR04 only) x2
3Male to Female Jumper Wires x10
Smraza is a professional manufacturer on making all electronics components based on Arduino and Raspberry Pi.If you have any technical questions, please contact us by email to get support.
8. Measuring Module Ranging Ultrasonic Distance Sensor for Obstacle Avoidance in Raspberry Pi or Arduino Projects Pack of 2
Feature
Please get the original ultrasonic sensor from" Ardess"! This is a really common sonar-type Ultrasonic Distance Sensor commonly used with Arduino's and raspbery microcontrollers, helping your robot avoid objects with few lines Arduino code.This ultrasonic module is different from the parallax sensor in that it uses the 4 pin connection vs a 3 pin connection. If you use an arduino controller for this it's no problem.
The sensor boards are pretty well-built without solder joints and all pins are clearly labeled on the board silkscreen. Legs are compatible with breadboards so it's easy to use for quick prototyping
Cheaper alternative,great option for arduino projects!!I'd recommend these range sensors to anyone needing to sense distance for any of there Arduino projects.
Description
ArdestTM is a registered trademark b ArdessIf you need some kind of simple "eye" for a robotics project this ultrasonic sensor could do well for finding and avoiding obstacles!
Use an HC-SR04 ultrasonic sensor to give your robot the perception of distance.
Application:
For collision avoidance projects, obstacle sensing Arduino tracked robot projects,autonomous vehicles and boats, physics lab classes
Features:
-Ultrasound modules/Ranging sensor works, both with Leonardo and mega.Great sensor for simple Arduino-based distance measurements, measuring distances Up to 30' and down to 3 inches.
- A lot of fun using these ultrasonic detectors for sonar on your Arduino powered obstacle avoidance robot.
--Objects as thin as cellophane or aluminum foil can be detected
How to Use:
There are 4 pins out of the module: VCC , Trig, Echo, GND.(Make the following connections from the HC-SR04 to the Arduino, respectively: VCC to 5V; GND to GND; Trig to any digital output; Echo to any digital input.)
The all process is : pull the Trig pin to high level for more than 10us impulse , the module start ranging ; finish ranging , If you find an object in front , Echo pin will be high level , and based on the different distance,it will take the different duration of high level. So we can calculated the distance easily.
Distance = ((Duration of high level)*(Sonic :340m/s))/2
Specification
1.Working Voltage : 5V(DC)
2.Static current: Less than 2mA.
3.Output signal: Electric frequency signal, high level 5V, low level 0V.
4.Sensor angle: Not more than 15 degrees
5.Detection distance: 2cm-450cm
6.High precision: Up to 0.3cm
7.Input trigger signal: 10us TTL impulse
8.Echo signal : output TTL PWL signal
9.Accuracy:+/-0.1cm(vary depending on the clock resolution real-time latency of the OS you use.)
Mode of connection:
1.VCC
2.trig(T)
3.echo(R)
4.GND
9. SMAKN Ultrasonic Module HY-SRF05 Distance Sensor for Arduino UNO R3 MEGA2560 DUE
Feature
Detection distance: 2cm-450cm; Electronic brick compatible interface; Breadboard friendly ; Dual transducer ; Arduino library readyWorking Voltage : 5V(DC); Static current: Less than 2mA.
Output signal: Electric frequency signal, high level 5V, low level 0V. Sensor angle: Not more than 15 degrees.
High precision: Up to 0.3cm; Working temperature:-20C--+60C; Size:4 5x 21mm( L x W)
Package includes: 1 x New Arduino Ultrasonic Module HY-SRF05 Distance Sensor
Description
Detecting range: 3cm-4MBest in 30 degree angle
Electronic brick compatible interface
5VDC power supply
Breadboard friendly
Dual transducer
Arduino library ready
Specification:
Working Voltage: 5V (DC)
Static current: Less than 2mA
Output signal: Electric frequency signal, high level 5V, low level 0V
Sensor angle: Not more than 15 degrees
Detection distance: 2cm-450cm
High precision: Up to 0.3cm
Working tempter:-20C___+60C
Weight: 10
Size: 45x 21mm (L x W)
Connector Pin:
VCC
Trig (T)
Echo(R)
OUT
GND
Package Included:
1 X HY-SRF05 Ultrasonic Ranging Sensor Module
Recent Comments