Top 9 recommendation v6 hotend 24v 2022
When you looking for v6 hotend 24v, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable v6 hotend 24v is not an easy task. In this post, we show you how to find the right v6 hotend 24v along with our top-rated reviews. Please check out our suggestions to find the best v6 hotend 24v for you.
![[Gulfcoast Robotics] All Metal V6 Bowden Extruder Hotend for 3D Printer - 24V /1.75mm Filament / 0.4mm Nozzle.](https://images-na.ssl-images-amazon.com/images/I/51fOQTqPMWL.jpg)
1. [Gulfcoast Robotics] All Metal V6 Bowden Extruder Hotend for 3D Printer - 24V /1.75mm Filament / 0.4mm Nozzle.
Feature
Link to online assembly and configuration instructions is printed on the packageOur hotend comes with original design silicone protective sock
24V 40W heater, 24V fan, NTC 3950 pre-wired thermistor are included in the kit
Includes 1 meter long 4mm OD 2mm ID bowden line PTFE tubing
Description
Hotend is equipped with NTC3950 thermistors, 24V 40W heater, 24V fan
24V powered V6 hotend can be used as upgrade to various 3d printers with 24V power supplies, as well as for DIY projects.
NTC 3950 Thermistor parameters:
Use TEMP Sensor number 11 in Marlin firmware.
Small Size: 1.25mmx2.0mm glass bead.
High accuracy: 1%.
Resistance value at 25C=100K.
Wiring insulation: high temperature teflon/PTFE.
Wiring length: 1 meter.
Package contents:
1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle.
1 x 24 40W Heater with 1 meter long wiring.
1 x NTC3950 Thermistor wuth 1 meter long wiring.
1 x Heatsink Shroud with High Speed Fan 3010 24V 0.13A.
1 x One Meter long Bowden tubing 4mm OD 2mm ID.
1 x PC4-01 threaded 1/8" NPT fitting.
1 x Thermal Protection Silicone Sock.
2. EAONE All-Metal J-Head V6 Hotend Kit with 5 Pcs Extruder Print Head + 5 Pcs Nozzle Throat + 4 Pcs Volcano Extruder Nozzles + 1 Pc Volcano Heating Block for E3D V6 Makerbot RepRap 3D Printers
Feature
Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 5 pcs brass extruder nozzles(1x0.2mm/1x0.3mm/2x0.4mm/1x0.5mm), 4 pcs brass volcano extruder print head(1x0.6/1x0.8/1x1.0/1x1.2) and a volcano heating block, 5 Pcs stainless steel nozzle throat and M3 hex driverSpecification: brass material extruder nozzles, output diameter 0.2mm/ 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280C, 12V high speed fan, radiating quickly
Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall
Description
EAONE J-Head V6 Hotend Kit
Specification
12V/40W heater,temperature can be up to 280CLong-term temperature: 240C/ short-term temperature: 280C
12V high speed fan with shroud, radiating quickly
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 tube fitting
Volcano heating block
Outer thread : M6 M7
Nozzle throat outer diameter: 6mm
Nozzle throat inner diameter: 4mm
Teflon pipe inner diameter: 2mm
Length of nozzle throat: 22.5mm
Filament diameter : 1.75mm
Extruder brass nozzle input diameter: 1.75mm
Extruder brass nozzle output diameter: 0.2mm 0.3mm 0.4mm 0.5mm
Volcano extruder nozzle output diameter: 0.6mm 0.8mm 1.0mm 1.2mm
Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer
Attention: Small parts, keep away from children
package including:
1 x all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/ extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.2mm nozzle print head
1 x 0.3mm nozzle print head
2 x 0.4mm nozzle print head
1 x 0.5mm nozzle print head
1 x 0.6mm volcano nozzle print head
1 x 0.8mm volcano nozzle print head
1 x 1.0mm volcano nozzle print head
1 x 1.2mm volcano nozzle print head
1 x volcano heating block
5 x 1.75mm stainless steel nozzle throat
1 x M3 hex driver
3. Genuine E3D V6 All-Metal HotEnd 1.75mm Universal w/Bowden Full Kit - 24V (V6-175-B-24V)
Feature
Genuine E3D PartsThe E3D V6 Hot End: Smaller, Easier, High Performance
High Temperature Performance
The V6 can comfortably reach 300C with the supplied thermistor
Low bulk in X/Y dimensions
Description
Print the Widest Possible Range of Materials
The signature all-metal design allows you to reliably print high temperature materials, and it has added extra functionality with soft and flexible filaments. This opens up a huge range of new opportunities for your printer.
High Temperature Performance
The V6 can comfortably reach 300C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) or PT100 you can reach over 400C. This not only allows you to print extremely high temperature materials like Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated with PEEK/PTFE designs. The PTFE filament guide inside the V6 HotEnd is never subjected to high temperatures, so there is no risk of damage through overheating.
Compact
E3D focussed on cutting as much bulk from the E3D V6 as possible. This means an overall length of just 62mm, and low bulk in X/Y dimensions!
Easy to Use
The new thermistor cartridge simply slides into place and is secured with a single screw. High temperature glass is used in the sleeving to insulate the thermistor legs as well. This makes installing or removing the thermistor a quick and clean process compared to previous methods involving fiddly taping.
High Quality Printing
E3D kept the sharp thermal transition that gives the high quality printing performance users have come to expect from E3D HotEnds. A sharp thermal break gives better control over filament output so you get more immediate start and stops when extruding as well as retracts that are more effective in combating ooze. This means sharper, more accurate prints that have less stringing, oozing or blobbing.
Adaptable
The V6 is a fully-integrated part of the E3D Ecosystem. E3D's nozzles and blocks give more opportunity to choose how to print.
4. Genuine E3D V6 All-Metal HotEnd 3mm Universal w/Bowden Full Kit - 24V (V6-300-B-24V)
Feature
Genuine E3D PartsThe E3D V6 Hot End: Smaller, Easier, High Performance
High Temperature Performance
The V6 can comfortably reach 300C with the supplied thermistor
Low bulk in X/Y dimensions
Description
Print the Widest Possible Range of Materials
The signature all-metal design allows you to reliably print high temperature materials, and it has added extra functionality with soft and flexible filaments. This opens up a huge range of new opportunities for your printer.
High Temperature Performance
The V6 can comfortably reach 300C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) or PT100 you can reach over 400C. This not only allows you to print extremely high temperature materials like Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated with PEEK/PTFE designs. The PTFE filament guide inside the V6 HotEnd is never subjected to high temperatures, so there is no risk of damage through overheating.
Compact
E3D focussed on cutting as much bulk from the E3D V6 as possible. This means an overall length of just 62mm, and low bulk in X/Y dimensions!
Easy to Use
The new thermistor cartridge simply slides into place and is secured with a single screw. High temperature glass is used in the sleeving to insulate the thermistor legs as well. This makes installing or removing the thermistor a quick and clean process compared to previous methods involving fiddly taping.
High Quality Printing
E3D kept the sharp thermal transition that gives the high quality printing performance users have come to expect from E3D HotEnds. A sharp thermal break gives better control over filament output so you get more immediate start and stops when extruding as well as retracts that are more effective in combating ooze. This means sharper, more accurate prints that have less stringing, oozing or blobbing.
Adaptable
The V6 is a fully-integrated part of the E3D Ecosystem. E3D's nozzles and blocks give more opportunity to choose how to print.
5. Genuine E3D V6 Gold HotEnd 24v (V6-175-GOLD-24V)
Feature
Genuine E3D PartsThe Gold edition V6 has been upgraded with some of the very best components available from E3D
The aluminium heater block for a plated copper-alloy block
The standard brass nozzle has been swapped in favor of hardened steel
Description
To celebrate the E3D V6's third birthday we wanted to do something special to show off the HotEnd that spawned a whole ecosystem. More than just bling, the Gold edition V6 has been upgraded with some of the very best components available from E3D, at a lower price point than purchasing components individually. We upgraded the following stock components for the best we sell in order to create the bacon of HotEnds:
Golden Heat Sink
We've blinged up the heat sink with gold anodising, so that everyone can see from 10 yards away that you are a fancy individual who will only accept the best of the best in HotEnd technology.
Heater Block
We've switched the aluminium heater block for a plated copper-alloy block, again increasing heat transfer to the filament and reducing the chance of filament goo sticking to it. This reduces the need for a sock, so that you can show off the shiny engraving.
Nozzle
The standard brass nozzle has been swapped in favour of hardened steel. Whereas brass nozzles can be worn down and even ruined by abrasive materials, hardened steel will last a lifetime. If you print with carbon fibre, filled filaments, or even glow in the dark filament then these nozzles are a must.
Heater Cartridge
We've swapped standard heaters for our upcoming high precision, quick release heater cartridges. Spot-on physical dimensions and electrical specifications guarantee perfect performance. Quick release also makes tinkering with your HotEnd a doddle.
Fan Duct
A clear, molded plastic fan duct shows off the beautiful golden heatsink to its very best.
PTFE Guide
We've upgraded the standard PTFE guide to High Tolerance Capricorn PTFE Tubing. This new bowden tubing has a tight diameter and much-reduced friction, giving smoother, more accurate extrusion.
6. E3D V6 All-Metal HotEnd Full Kit - 1.75mm Universal (Direct) (24V)
Feature
E3D V6 all metal hotend 0.4mm nozzle for 1.75mm filament (Direct) (24V).The E3D V6 has been redesigned from the ground up: smaller, easier and higher performance.
Use up to 300C with the supplied thermistor for Polycarbonate, Nylon, PLA, ABS and more.
Original E3D package. Assembly instruction available on E3D website.
Fast free shipping from 3DMakerWorld (Continental US)
Description
E3D V6 All Metal HotEnd Full Kit - 1.75mm Universal (Direct) (24v). The package contains the following parts:
Metal parts
- 1 x Aluminium Heatsink (Contains brass embedded bowden coupling ring pre-fitted in top)
- 1 x Stainless Steel Heatbreak
- 1 x Brass Nozzle (0.4mm)
- 1 x Aluminium Heater Block
Electronics
- 1 x 100K Semitec NTC thermistor
- 1 x 24v Heater Cartridge
- 1 x 24v 30x30x10mm fan
- 1 x High Temperature Fiberglass Wire - for Thermistor (150mm)
- 2 x 0.75mm Ferrules - for Solder-Free Wire Joins
Fixings
- 4 x Plastfast30 3.0 x 16 screws to attach the fan to the fan duct
- 1 x M3x3 socket dome screw and M3 washer to clamp thermistor
- 1 x M3x10 socket dome screw to clamp the heater block around the heater cartridge
- 1 x Fan Duct (Injection Moulded PC)
Please check the manufacturer's website for assembly instructions and detailed technical information.
7. INBBOX E3D V6 Hotend All Metal 24V V6 J Head Extruder Kit for Makerbot RepRap Prusa 3D PrinterGift1pcs Nozzle Cleaner
Feature
Package Include: All Metal V6 Hotend 12v/40w/1.75mm/0.4mm Extruder Full Kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ) free giftcleaning kit 1pcsApplicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer
High temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 C, 12V high speed fan, lose heat quickly
Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
Easy to install: NTC connector with terminal, you can install directly(Hotend is equipped with NTC3950 thermistors)
Description
Specification of All Metal V6 Hotend Full kit:*12V/40W heater, the temperature can up to 280CLong-term temperature: 240C/ short-term temperature: 280C
*12V high speed fan with shroud
*One meter long PTFE/teflon tubing 4mm OD 2mm ID
*PC4-01 Tube Fitting
Specification of Extruder Tube:
Type : Nozzle Throat
Outer Thread : M6 M7
Nozzle Throat Outer Diameter:6mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 22.5mm
Filament Diameter : 1.75mm
Material : Stainless Steel
Specification of Brass Nozzle:
Type : Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm
Note:
Compatibility:Compatible with all 1.75mm V6 E3D Makerbot 3D printer
Attention: Small parts, keep away from children
package including:
1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
gift1pcs cleaning kit
8. E3D V6 All-Metal HotEnd Full Kit - 1.75mm Universal (with Bowden add-on) (24V)
Feature
E3D V6 all metal hotend 0.4mm nozzle for 1.75mm filament (with Bowden add-on) (24V).The E3D V6 has been redesigned from the ground up: smaller, easier and higher performance.
Use up to 300C with the supplied thermistor for Polycarbonate, Nylon, PLA, ABS and more.
Original E3D package. Assembly instruction available on E3D website.
Fast free shipping from 3DMakerWorld (Continental US)
Description
E3D V6 All Metal HotEnd Full Kit - 1.75mm Universal (with Bowden add-on) (24v). The package contains the following parts:
Metal parts
- 1 x Aluminium Heatsink (Contains brass embedded bowden coupling ring pre-fitted in top)
- 1 x Stainless Steel Heatbreak
- 1 x Brass Nozzle (0.4mm)
- 1 x Aluminium Heater Block
Electronics
- 1 x 100K Semitec NTC thermistor
- 1 x 24v Heater Cartridge
- 1 x 24v 30x30x10mm fan
- 1 x High Temperature Fiberglass Wire - for Thermistor (150mm)
- 2 x 0.75mm Ferrules - for Solder-Free Wire Joins
Fixings
- 4 x Plastfast30 3.0 x 16 screws to attach the fan to the fan duct
- 1 x M3x3 socket dome screw and M3 washer to clamp thermistor
- 1 x M3x10 socket dome screw to clamp the heater block around the heater cartridge
- 1 x Fan Duct (Injection Moulded PC)
Bowden add-on
- 800mm of appropriately sized PTFE tubing.
- 1 x Screw in Coupler for extruder end of tubing.
Please check the manufacturer's website for assembly instructions and detailed technical information.
9. REPKORD 24v 40W 6mm x 20mm Stainless Steel Cartridge Heater RepRap for 3D Printer Hot-End E3D V6 and Volcano Compatible
Feature
24 volts40 watts
20mm length, 6mm diameter, 40in (1M) wire length.
Compatible with E3D v6 volcano and other hot-ends
1M Long cable for use in delta stlye configurations
Description
Get quality prints at an affordable cost. Vacuum sealed with desiccant. For best results, to keep your filament in top shape store in airtight container or zipper bag when not in use.
Recent Comments