Top ammo box locking hardware
If you looking for ammo box locking hardware then you are right place. We are searching for the best ammo box locking hardware on the market and analyze these products to provide you the best choice.
1. Case Club Locking Hardware for Steel Ammo Can
Feature
Ammo Can and padlock NOT INCLUDEDWorks on 50 Cal, Fat 50, 30 Cal, 20 mm, 40 mm ammo cans
Will work with medium size locks as large as 1/4" lock shackle
Stainless steel hardware which helps prevent rust, and no thread locking adhesive required!
Includes installation directions & gasket washer to keep ammo can watertight
Description
Ammo Can and padlock NOT INCLUDED. Turn your steel ammo can into a secure locking case with Case Club's Ammo Can Locking Hardware. Simply drill into your can in the center of the hole of the closing latch, follow installation instructions of the Locking Hardware, and secure your padlock! This product also works great in conjunction with Case Club's Ammo Can Foam options (available on Amazon), and can even turn your ammo can into a convenient/inexpensive/sturdy/ and legal gun case! Will work with medium size locks as large as 1/4" inch shackle but be advised many "standard" locks use a 5/16" inch thick shackle & will be too large!2. Ammo Box Can Lock Hardware Kit .50 Cal, Fat 50,l 30 Cal, 20 mm, 40 mm (1 Count)
Feature
Ammo Can and lock in picture not includedWorks on 50 Cal,Fat 50, 30 Cal, 20 mm, 40 mm ammo cans
Will work with medium size locks as large as 1/4" lock shackle
Kit includes: The Stainless Steel stud, One large washer,
One small washer, One neoprene washer , One Grade 8 nylon locknut, and instructions.
Description
Captain Jon's Green Can Ammo Locking Hardware. Second Generation Now Stainless Steel and Easier to install. Still the Real Deal. Still High Quality. And still the Best and Easiest way out there to "Make your ammo can - Lockable and Safe. " One Piece 1/2" Solid Stainless Steel Stud and 5/16" Threads (Made in the USA) (PatPending) No thread locker compound needed. Ammo Can Waterproofing stays intact. (Thanks Bob Whitehead) The padlock stud is now a one piece design (post and thread together). Made from Solid (1/2") machined STAINLESS 303 STEEL. Made right here in the good old US of A. (Could of done it cheaper overseas but why?. The stud is secured with a nylon locknut that is Grade 8 Steel (zinc plated) thus eliminating the need for any thread locking compound. The watertight integrity of the can stays intact because we now include a Neoprene Washer that goes on the inside (or outside) . The large and small washers included are all steel and zinc plated for rust protection. The padlock stud will take up to a 1/4" lock shackle. Overkill, but once again why scrimp when security is your goal? Installation involves drilling one 11/32"or 5/16" hole, put on the neoprene washer, then the small metal washer, then the locknut and you are Done. Will work on all Ammo can lids. Slotted lids ( slotted lids require two ), Big hole lids, and Small hole lids. For the small hole lids some minor fitting may be needed. Very Minor. The stud is now a true 1/2" so any filing will be very minor as the lid hole is a 1/2" too. If you have a slotted lid or a large hole lid then NO filing/fitting will be needed. Buy these and you will not regret it. Remember - when you mean it , Green it. (tm) This product has a 100% guarantee. If for any reason it doesn't meet your expectations, return it for a full refund.3. Army Force Gear Ammo Can Lock Kit .50 Cal, Fat 50, 30 Cal, 20 mm, 40 mm Ammunition Cans - 5 pack
Feature
THE BEST OUT THERE - The best and easiest way out there to make your ammo can lockable and safe! And waterproof.KIT INCLUDES - Top quality stainless steel stud, one large washer, one small washer, one neoprene washer, one grade 8 nylon locknut, and instructions.
ONE SIZE FITS ALL - Works on 50 Cal, Fat 50, 30 Cal, 20 mm, 40 mm Ammo cans. Will work with medium size locks as large as 1/4" lock shackle
WHAT YOU GET - You get the lock hardware kit; you DO NOT GET the Ammo can and padlock
100% SATISFACTION GUARANTEE - This product has a 100% guarantee. If for any reason it doesn't meet your expectations, return it for a full refund.
Description
Army Force Gear Ammo Can Locking Hardware is made from stainless steel easy to install, this is one of the top high quality Ammo can lock kit on the market.
Ammo Box and padlock are NOT INCLUDED. Turn your steel ammo can into a secure locking case with the AFG Ammo Can Locking Kit. Simply drill into your ammo can in the center of the hole of the closing latch, follow the included instructions or visit our site for a short how to and you are all set. Convert your box to a gun case or any secure locked box, perfect for any prepper, survivalist or just anyone that wants to lock their ammo can. This product has a 100% guarantee. If for any reason it doesn't meet your expectations, return it for a full refund.
4. Ultimate Arms Gear Mil-Spec Ammo Can Steel Safe Lock Fits 60mm, 40mm, 20mm, 50 cal and 30 cal Box Cans, 3pc Hardware Kit System Includes L-Shaped Bracket Hinge, Bolt & Lock with Keys
Feature
Keep your ammo secure and protected with our Ammo Can "Safe Lock" System, that turns your ammo can into an indestructible safe.Its heavy-grade steel "L" shaped bracket cannot be bent, hammered, or pried off, once secured to the ammo can, so only you can get in.
Fits 60mm, 40mm, 20mm, 50 cal., and 30 cal Ammo Can.
Brand New, Includes 3pc Hardware System Only, No Ammo Can.
Description
Official Product of Ultimate Arms Gear, Brand New.5. ACM New MilSpec 50 Cal Ammo Can with Locking Hardware
Feature
Includes pre-installed stainless steel locking hardware on a 50 Cal Ammo CanPadlock hole: 0.25" dia, OD: 12"x6"x7.5" plus 0.5" locking hardware, ID: 11"x5.625"x6.875"
O-ring seal on lid and locking hardware for watertight seal
Padlock is not included
Store your equipment with the confidence of a military grade ammo can
Description
Ammo Can Man's 50 Cal Ammo Can with locking hardware brings the added security element to an already superior storage container. Protect the contents with this military grade ammo can made of steel and corrosion resistant paint with a water tight seal.6. 11.8" All Metal 50 Caliber Ammo Can with Installed Locking Hardware by Modern Warrior
Feature
The 50 caliber ammo can measures 11.8"L x 6"W x 7.5"HRubber sealed to provide air tight and waterproof storage
Convenient carry handle that folds flat
Hinged lid with attached locking hardware (padlock not included)
By Modern Warrior
Description
Keep belongings safe and dry with this 50 caliber heavy duty steel ammo can. The box measures 11.8"L x 6"W x 7.5"H and has a convenient carry handle that folds flat. The rubber seal ensures no water will penetrate and the attached locking hardware means items will stay safe and secure. (Padlock not included). By Modern Warrior7. Ammo Box Can Lock Hardware Kit .50 Cal, Fat 50, 30 Cal, 20 mm, 40 mm (10 Count)
Feature
Ammo Can and lock in picture not includedWorks on 50 Cal,Fat 50, 30 Cal, 20 mm, 40 mm ammo cans
Will work with medium size locks as large as 1/4" lock shackle
Kit includes: The Stainless Steel stud, One large washer,
One small washer, One neoprene washer , One Grade 8 nylon locknut, and instructions.
Description
Captain Jon's Green Can Ammo Locking Hardware. Second Generation Now Stainless Steel and Easier to install. Still the Real Deal. Still High Quality. And still the Best and Easiest way out there to "Make your ammo can - Lockable and Safe. " One Piece 1/2" Solid Stainless Steel Stud and 5/16" Threads (Made in the USA) (PatPending) No thread locker compound needed. Ammo Can Waterproofing stays intact. (Thanks Bob Whitehead) The padlock stud is now a one piece design (post and thread together). Made from Solid (1/2") machined STAINLESS 303 STEEL. Made right here in the good old US of A. (Could of done it cheaper overseas but why?. The stud is secured with a nylon locknut that is Grade 8 Steel (zinc plated) thus eliminating the need for any thread locking compound. The watertight integrity of the can stays intact because we now include a Neoprene Washer that goes on the inside (or outside) . The large and small washers included are all steel and zinc plated for rust protection. The padlock stud will take up to a 1/4" lock shackle. Overkill, but once again why scrimp when security is your goal? Installation involves drilling one 11/32"or 5/16" hole, put on the neoprene washer, then the small metal washer, then the locknut and you are Done. Will work on all Ammo can lids. Slotted lids ( slotted lids require two ), Big hole lids, and Small hole lids. For the small hole lids some minor fitting may be needed. Very Minor. The stud is now a true 1/2" so any filing will be very minor as the lid hole is a 1/2" too. If you have a slotted lid or a large hole lid then NO filing/fitting will be needed. Buy these and you will not regret it. Remember - when you mean it , Green it. (tm) This product has a 100% guarantee. If for any reason it doesn't meet your expectations, return it for a full refund.8. Wise Outdoors 5602-15 Tall Utility Dry Box, Orange
Feature
Extra-thick co-polymer construction will not warp from sun, cold or rough handling, comes with a lift out trayUnique MOLDED-IN retainers to stack boxes on top of one another, with true square inner sidewalls that allow gear to stack tight without shifting
Hand-laid lid gasket seals the inside from moisture to pretect gear from damage
Strong reinforced steel pin hinge system and beefy carry handle that stores within lid
Dimensions Outside: 15" Length, 7.75" Width, 11.5" Height; Dimensions Inside: 12" Length, 6" Width, 9.75" Depth
Description
Wise No.5602 Tall Utility Box is Constructed of Thick Wall Injection Molded Plastic. Patterned after the US Armed Forces Ammo Box is the toughest Storage Box you will find. Heavy Duty Hinge Pins and Locking Latch System. Recessed Carry Handle, Special Molded in Retainers to Stack Box on Box. Comes with Liftout Tray. Outer Dimensions: 15" L x 7.75" W x 11.5" H, Inner Dimensions: 12" L x 6" W x 9.75" D. Lifetime Warranty.9. Tactical Overlord Ammo Box Locking Kit Storage Converter Hardware Kit for .50 Cal, Fat 50, 30 Cal, 20 mm, 40 mm Ammunition Cans Set of 2 Made in The USA
Feature
THE BEST OUT THERE - The best and easiest way out there to make your ammo can lockable and safe! And waterproof.KIT INCLUDES - Top quality stainless steel stud, one large washer, one small washer, one neoprene washer, one grade 8 nylon locknut, and instructions.
ONE SIZE FITS ALL - Works on 50 Cal, Fat 50, 30 Cal, 20 mm, 40 mm Ammo cans. Will work with medium size locks as large as 1/4" lock shackle
WHAT YOU GET - You get the lock hardware kit; you DO NOT GET the Ammo can and padlock
100% SATISFACTION GUARANTEE - This product has a 100% guarantee. If for any reason it doesn't meet your expectations, return it for a full refund.
Description
Make your ammo can - Lockable and Safe. One Piece 1/2 Solid Stainless Steel Stud and 5/16" Threads (Made in the USA) No thread locker compound needed. Ammo Can Waterproofing stays intact.The stud is secured with a nylon lock-nut that is Grade 8 Steel (zinc plated) thus eliminating the need for any thread locking compound. The watertight integrity of the can stays intact because we include a Neoprene Washer that goes on the inside (or outside) . The large and small washers included are all steel and zinc plated for rust protection. The padlock stud will take up to a 1/4" lock shackle. This product has a 100% guarantee. If for any reason it doesnt meet your expectations, return it for a full refund.10. Stack-On GCB-900 Steel Pistol/Ammo Cabinet, Black
Feature
Includes fastening hardwareLocking mechanism passes through steel door and is secured
Units are fully lockable with key coded, double-bitted lock
Two removable shelves and foam padded bottom provide ample storage
Pre-drilled mounting holes allow for easy attachment to floor, ceiling, wall or other Stack-On pre-assembled gun cabinets
Recent Comments