Top dewalt drill press cordless for 2022
If you looking for dewalt drill press cordless then you are right place. We are searching for the best dewalt drill press cordless on the market and analyze these products to provide you the best choice.
1. wolfcraft 4525404 Muilt-Angle Drill Guide Attachment for 1/4in. and 3/8in. Drills
Feature
Drill Guide that can be used in horizontal, vertical or angle positionsGuide-bars themselves have springs for a quick return when doing repetitive drilling
Drill adapter itself slides up and down on guide-bars
Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place
Fits all 1/4-inch or 3/8-inch drills
Description
Turn your portable drill into a drill press and get the accuracy you need at a job site! The guide attaches directly to a 3/8" drill chuck, and allows you to drill larger pieces you can't fit on your stationary press. Pre-drilled holes allow you to attach a base or mount it to a table. Features: Turns your portable drill into a portable drill press Sets up in seconds for hand-held drilling of accurate holes Attaches directly to a 3/8" drill chuck Allows you to drill larger pieces you can't fit on your stationary press Pre-drilled holes allow you to attach a base or mount it to a table Maximum 6000 RPM2. DEWALT DWE1622K 2-Speed Magnetic Drill Press, 2-Inch
Feature
10 amp motor, 2-speed settingsl ;No Load Speed : 300/450 rpmOverload protection electronics which prevent motor damage
Quick Change chuck system
Magnetic coolant bottle can be placed on either side of tool or on a work surface
4-3/8 inch Drill travel offers maximum capacity for heavy duty applications
Description
The DEWALT DWE1622K 2" 2-Speed Magnetic Drill Press features a 10 amp motor with 2-speed settings that provide optimal performance in a variety of applications. This press has overload protection electronics which prevent motor damage and excess accessory wear designed for long life. A Quick Change chuck system allows for tool free change between 3/4" Weldon Shank and 1/2" keyed chuck, and the Quick Release feed handles provide tool free change of handles to either side of the tool. The magnetic self feed cooling tank allows the user to regulate the flow of cooling fluid and can be placed on either side of tool or on a work surface to allow for a variety of tool orientations. 4" Drill travel offers maximum capacity for heavy duty applications, along with a motor height adjustment that gives greater range of accessory compatibility. Includes: DWE1622 Drill Press, Safety chain, and Height adjustment tool, Quick change 1/2-in keyed chuck, Kit box3. Evolution Power Tools 849713054050 EVO28 Magnetic Drilling System
Feature
6 Inch Stroke LengthHeavy-Duty Magnetic Holding Power
Includes 1/2 Inch Chuck and Key
Integrated Coolant System
Left or Right Handles
7/16"- 1-1/8" Cutting Diameter
2" Depth of Cut
High Quality Construction
Right or Left Spoke Handles
Description
1-1/8 Inch x 2 Inch Capacity Magnetic Drill with heavy-duty magnetic holding power. Includes chuck and adaptor for twist drills up to 1/2 inch diameter. Right or left side handles. Integrated coolant system.4. Evolution Power Tools A-CC6SET-1 CYCLONE Premium 1-Inch Annular Cutter Set with Pilot Pins-For Use With Magnetic Drills, 6-Piece
Feature
Free Pilot Pin Included3/4" Weldon shank with 2 flats - fits most standard magnetic drill presses
Made of M2AL High Speed Steel
Description
Evolution annular cutters save time and energy when compared to twist drills. By cutting only the periphery of the hole, annular cutters produce a reamed, finished, burr-free hole. No pre-step drilling is required; holes are cut in as little as 15 seconds. The CC6SET1 includes six 1-Inch cutters with diameters of 9/16-Inch, 5/8-Inch, 11/16-Inch, 13/16-Inch, 15/16-Inch, and 1-Inch all within a specially made carrying case.5. Hougen HMD904 115-Volt Magnetic Drill w/coolant bottle plus 1/2" drill chuck, adapter and 12002 rotabroach cutter kit
Feature
The mag drill of choice for fabrication. Lightweight, compact, powerful, & versatile. Now better than ever completely redesigned with more features.Large 7/16"-1-1/2" dia. / 2" D.O.C. Capacity and a 450 RPM motor. New - pilot light for low light or no light conditions, New - two stage magnet 30% power increase when motor is turned on.
New - slot drive arbor for more accuracy and quicker change out of accessories, New - housing - stronger stiffer, more ergonomic, positive slug ejection.
Feed handles quickly change from side to side, lift detector safety system, rear mounted controls, gravity feed coolant system (hmd904 w/ coolant bottle) Made in U.S. A. One year warranty
Fabricators kit includes HMD904 w/coolant bottle plus 1/2" drill chuck, adapter and 12002 Rotabroach cutter kit.
Description
The HMD904 with its powerful performance, lightweight size, small footprint and hole capacity is the most popular model in the line of Hougen magnetic drills.The LED light is built into the base of the magnet and allows the operator to more efficiently and quickly line up the pilot with the hole's center location in low light or no light conditions. Powering the drill is a proprietary Hougen motor with a new design to the aluminum casing to improve durability.
The addition of a two stage magnet increases magnetic holding power by 30% when the drill motor is turned on. This saves energy and increases magnet life. A new arbor system utilizes a 5/8" slot drive for more rigidity, hole accuracy and quicker use of accessories such as drill chucks and tapping attachments.
The HMD904 has many additional features that make the drill easier to use; a more robust housing design with an ergonomic carrying handle, a spot to hold the hex wrench, reversible feed handles and a d-ring on the back of the magnet for quickly attaching the safety chain.
The HMD904 weighs just 28.9 lbs (13.1 kg), measures 19-5/8"H x 7-3/4"W x 11-5/8"L (499mm x 197mm x 295mm) and provides drilling capacities from 7/16" up to 1-1/2" (12 - 38mm) diameter and 2" (50mm) depth of cut. The drill has an electrical rating of 9A and a 450 RPM motor.
For safety the HMD904 incorporates Hougen exclusive features to insure a safe work environment including a no-adjustment safety switch, which shuts down the drill motor if lift of the magnetic base is detected plus an LED indicator that monitors this sensor and alerts if the safety switch is not properly engaged. A two stage power on switch prevents drill rotation unless the magnet has first been engaged, and, in the case of a power interruption, safety circuitry will keep the drill motor off after power is restored until the start button is manually depressed. The HMD904 is made in USA Swartz Creek, MI. Hougenmagdrills.com
6. Hougen HMD904S 115-Volt Swivel Base Magnetic Drill w/coolant bottle plus 1/2" drill chuck, adapter and 12002 rotabroach cutter kit
Feature
The mag drill of choice for fabrication. Lightweight, compact, powerful, & versatile. Now better than ever completely redesigned with more featuresLarge 7/16"-1-1/2" dia. / 2" D.O.C. Capacity and a 450 RPM motor. New - pilot light for low light or no light conditions, New - two stage magnet 30% power increase when motor is turned on
Swivel Base adds even greater versatility: Precisely line up your pilot with the holes center location, One stroke lock and unlock handle, Great for horizontal, overhead, tight areas, and getting out over another piece of steel, New - slot drive arbor for more accuracy and quicker change out of accessories
New - housing - stronger stiffer, more ergonomic, positive slug ejection, Feed handles quickly change from side to side, lift detector safety system, rear mounted controls, gravity feed coolant system (hmd904 w/ coolant bottle)
Fabricators kit includes HMD904 Swivel Base w/coolant bottle plus 1/2" drill chuck, adapter and 12002 Rotabroach cutter kit. Made in U.S. A.
Description
The mag drill of choice for fabrication. Lightweight, compact, powerful, & versatile. Now better than ever completely redesigned with more featuresThe HMD904S with its powerful performance, lightweight size, small footprint and hole capacity is the most popular model in the line of Hougen magnetic drills.The LED light is built into the base of the magnet and allows the operator to more efficiently and quickly line up the pilot with the hole's center location in low light or no light conditions. Powering the drill is a proprietary Hougen motor with a new design to the aluminum casing to improve durability.
The addition of a two stage magnet increases magnetic holding power by 30% when the drill motor is turned on. This saves energy and increases magnet life. A new arbor system utilizes a 5/8" slot drive for more rigidity, hole accuracy and quicker use of accessories such as drill chucks and tapping attachments.
The HMD904S has many additional features that make the drill easier to use; a more robust housing design with an ergonomic carrying handle, a spot to hold the hex wrench, reversible feed handles and a d-ring on the back of the magnet for quickly attaching the safety chain.
The HMD904S weighs just 28.9 lbs (13.1 kg), measures 19-5/8"H x 7-3/4"W x 11-5/8"L (499mm x 197mm x 295mm) and provides drilling capacities from 7/16" up to 1-1/2" (12 - 38mm) diameter and 2" (50mm) depth of cut. The drill has an electrical rating of 9A and a 450 RPM motor.
For safety the HMD904 incorporates Hougen exclusive features to insure a safe work environment including a no-adjustment safety switch, which shuts down the drill motor if lift of the magnetic base is detected plus an LED indicator that monitors this sensor and alerts if the safety switch is not properly engaged. A two stage power on switch prevents drill rotation unless the magnet has first been engaged, and, in the case of a power interruption.
7. BLACK BLUEROCK Tools Model BRM-35A Typhoon Magnetic Drill Roto-Broach
Feature
Drilling Capacity: 7/16"-1 1/2" - 2" depthComes with Free Chuck, Adapter, Oil Bottle, Safety Chain and Case
110V, 60Hz, 570 RPM
Uses Standard 3/4" Weldon Shank
BLUEROCK Tools Brand
Description
Specifications: o Drilling Capacity: 7/16"-1 1/2" o Drilling Depth: 2" o Tool Holder: Direct Arbor with" Weldon Shank o Motor Data: 110V/AC 60Hz o Speed: 570 Revolutions per/min o Magnetic Adhesion: 2600 ft/lbs o G. W.: 37 lbs o N. W.: 28 lbs o Stroke: 6.5" o Size: 19" x 15" x 8" Standard Twist Drill Bit Capacity (with Free Chuck): Up to 1" with step drilling. Generally customers use smaller than 7/16" standard twist drills bits with this machine. Also note that only short bits can fit with the free chuck attached as there is only 3.5" from magnetic base to bottom of the chuck. Bits not included.8. Steel Dragon Tools MD40 Magnetic Drill Press with 1-1/2" Boring Diameter & 2700lb Magnetic Force
Feature
Suitable for drilling on any metal surface.Rack and pinion gear system for exact drilling depth.
Motor: High-Speed Series, Induction, 1,100 W, 110 V, 60 Hz, 15 A
Max Magnetic Force: 2,700 lbs. (12,000 N). Thinner metal will result in less force.
Maximum Boring Diameter: 1-1/2 in. (40 mm). Maximum Boring Depth: 7-1/2 in.
Description
Steel Dragon Tools MD40 Magnetic Drill Press with 1-1/2" Boring Diameter & 2700lb Magnetic Force
The Steel Dragon Tools MD40 Magnetic Drill Press will accept up to 2-inch, high-speed steel annular cutters with a maximum boring diameter of 1-1/2 in. (40 mm). This magnetic drill press will attach directly to the metal drilling surface with a powerful electromagnet. The electromagnet has 2,700 lbs. of max force and ensures the machine will not move during the drilling process.
A secured magnetic drill press provides more leverage than a hand drill, allowing the operator to cut even, consistent holes. The magnet also allows the drill to operate upside down.
A full line of 1-inch and 2-inch HSS annular cutters by Steel Dragon Tools are available.
Features:
- Suitable for drilling on any metal surface.
- Rack and pinion gear system for exact drilling depth.
- One (1) year warranty against manufacturer defect.
Specifications:
- Motor: High-Speed Series, Induction, 1,100 W, 110 V, 60 Hz, 15 A
- Max Magnetic Force: 2,700 lbs. (12,000 N). Thinner metal will result in less force.
- Maximum Boring Diameter: 1-1/2 in. (40 mm)
- Maximum Boring Depth: 7-1/2 in.
- Tool Holder: 3/4-inch Weldon Shank
- Spindle Speed: 670 RPM
- Overall Weight: 30 lbs.
9. MILWAUKEE 4272-21 1-5/8" Electromagnetic Drill Kit
Feature
Powerful 13 amp motorCapacity to cut up to 1-5/8 in. diameter holes
2 Speed gearbox 475/730 RPM
Tool can be adjusted tool-free between annular cutters at 475RPM and twist drill bits at 730 RPM.
Tool free motor head adjustment
Recent Comments