Top electronics meter
If you looking for electronics meter then you are right place. We are searching for the best electronics meter on the market and analyze these products to provide you the best choice.
1. First Alert BRK 9120B Hardwired Smoke Alarm with Battery Backup
Feature
Keep your family safe with this hardwired smoke alarm; the battery backup means constant monitoring, even if there's a power failureEquipped with an ionization sensor, this smoke alarm reliably detects smoke from fast-flaming fires and alerts you with an 85-decibel alarm
To ensure complete protection make sure to place one on each level of your home and in each bedroom
Can connect to other compatible BRK or First Alert smoke detectors, to ensure all alarms will sound when smoke is detected
Simple to use, with a single test/silence button, and side-load battery compartment; tamper-resistant locking brackets and universal mounting brackets make installation easy
Rigorously tested to meet UL standards.120V AC power with 9V battery backup to keep alarm functioning during power outage.
Description
This First Alert hardwired smoke alarm includes a 9-volt battery backup that continues to protect you in the event of a power failure. The detector features an ionization sensor for detection of smoke and fast-flaming fires, as well as a loud, 85-decibel alarm. One button silences any nuisance alarms, and also tests detector functions, while lights indicate if the alarm detects smoke. The latching alarm indicator automatically identifies which unit initiated the alarm, even after the conditions that set off the alarm have subsided. And an end-of-life signal enhances your safety by letting you know when it's time to replace the unit. Connect it to compatible BRK or First Alert alarms within a single-family residence. When one alarm is triggered, all connected alarms will sound.2. Etekcity Lasergrip 774 Non-contact Digital Laser Infrared Thermometer Temperature Gun -58~ 716 (-50 ~ 380), Yellow and Black
Feature
BETTER ACCURACY: The Distance to Spot Ratio is 12:1, meaning the Lasergrip 774 can accurately measure targets at greater distances compared to most other IR Thermometers; For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17 inches (36cm)TARGET QUICKER: Measure surface temperature ranging from -58~ 716 / -50 ~ 380, you can choose the unit from / ; Response time: 500Ms; A built in Laser gives you the precision to hone in on the exact space you want to measure
ADDED FUNCTIONS: The LCD screen is backlit, also has an Auto-Off function to extend the battery life, and features a low battery indicator so you never accidentally run out of juice (battery included)
VERSATILE DESIGN: Infrared Technology makes this thermometer handy to measure the surface temperature of various objects especially temperatures above boiling points and below freezing points; Use it when you are cooking and barbequing, performing auto maintenance, doing home repairs, and a host of other tasks
NOTE: The thermometer can't measure the internal temperature of an object; Temperature readings from this devices are inanimate objects, the measured temperature for humans or animals will not be correct; FDA, FCC, CE approved; Class 2 laser, optical power 0.5-0.9mW; 2-Year Warranty by Etekcity
Description
NOTE1. The measuring surface is about 2cm below the infrared aiming point.
2. For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17inches (36cm).
Etekcity Laser grip 774 Thermometer guns have been used by major airports and security offices during the 2014 Ebola outbreak.
Laser Guided
Aim with precision at whatever you wish to measure, thanks to the laser beam guidance feature. Even from a far distance, the laser provides a mark to ensure accuracy every time you make a measurement.
Infrared Lens
The Infrared lens inside the Laser grip 774 Thermometer provides temperature readings without the need to touch or come close to anything dangerously hot or cold.
You'll be able to effortlessly measure high temperatures, hazardous and inaccessible objects, and even moving targets; such as hot engine parts, cooking surfaces, swimming pools, bath water, wine coolers, hot asphalt, electric bearings, and much more.
Specifications
Temperature Range: -50380 (-58716)
Accuracy: 2% or 2
Distance Spot Ratio: 12:1
Emissivity Adjustable: 0.95(fixed)
Response Time and Wavelength: <500ms and (8-14)
Repeatability: 1% or1
Resolution: 0.1 or 0.1
Storage Temperature: -20-50 (-4-122)
Operating Temperature: 0-50 (50-122)
Certifications: FDA, FCC, CE, ROHS
Package Included
1 x Etekcity Non-Contact Infrared Thermometer
1 x 9-Volt Battery
1 x User's Manual
2 Year Warranty by Etekcity .
3. Etekcity Digital Multimeter, MSR-R500 Electronic Amp Volt Current Ohm Voltage Meter Ammeter Multimeters with Diode and Continuity Test Tester, Backlight LCD Display (Red)
Feature
ACCURATELY MEASURES: Voltage, current, resistance, diode, continuity, and moreHELPFUL TROUBLESHOOTING: Use it to safely and accurately troubleshoot automotive and household electrical issues
EASE OF USE: Data Hold button holds a reading; large backlit LCD with large digits is easily visible in dimly lit areas
SAMPLING SPEED: 3 times per second. Built-in support stand allows for hand free use
SAFETY PROTECTION: Overload protection on all ranges. Protective rubber sleeve around the multimeter adds extra drop protection
1 Year Warranty and Lifetime Support from Etekcity
Note: the meter can not be used to test AC current and can not be used to test AC voltage like the voltage of RECEPTACLE WHEN the dial is located in the DC current range
Description
Do It All, and Then Some
The Etekcity MSR-R500 Digital Multimeter is a practical tool for electricians, hobbyists, and general household use. It is easy to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing. It can be used to diagnose, assemble, and repair circuitry and wiring. Other features include a low battery indicator, continuity buzzer, and overload protection. It's tough rubber sleeve protects it from the drops and falls associated with the toughest jobs.
Built for Everyday Use
A Data Hold function keeps the measurements displayed on the MSR-R500 while you record them and a larger display makes the MSR-R500 multimeter even easier to read. Add in the LCD backlight and protective rubber bumper and this is the meter for every job.
Specifications
Safety/Compliances: IEC61010 CAT.I 600V, CAT.II 300V, double insulation
Max.display: 1999, 3 1/2 digits
Range selection: Manual ranging
Overload display: Display OL
Sampling Speed: 2 times per second
Power: 1 x 9V 6F22 Battery Included (Low Battery Indication)
Diode Test: Yes
Continuity Test: Yes
Square Wave Output: Yes
Dimensions: 5.1" x 2.9" x 1.4"
DC Voltage: 200mV/2000mV/20V/200V (0.5%+2), 500V (0.8%+2)
AC Voltage: 200V/500V (2%+10)
DC Current: 2000A/20mA (1%+2), 200mA (1.2%+2), 10A (2%+5)
Resistance: 200 (0.8%+5), 2000/20K/200K (0.8%+2), 20M (1%+5), 200M [5%(reading-10)+10]
Package Includes
1 x Etekcity MSR-R500 Digital Multimeter
2 x Test Leads (pair)
1 x GP Supercell 6F22 9V Battery
1 x User's Manual
4. EEEKit 2-Pack Mini LCD Digital Electronic Temperature Humidity Meter Indoor Thermometer Hygrometer (Black)
Feature
Room indoor thermometer hygrometer tool, with built-in probeTemperature Measurement Accuracy: 1.0
Humidity Measurement Accuracy: 5% (at Room Temperature 25)
Real color could be a little bit different from stock photos due to screen reflection
Note: Button batteries are included
Description
Product DescriptionKit Includes: 2 x Digital Thermometer Hygrometer.
Please note that EEEKit and Amazon.com are the only sellers on Amazon that are authorized to sell products with the EEEKit name. Buy from sellers EEEKit or Amazon.com to ensure authenticity and better service.
Product Specification:
Temperature measurement accuracy: 1.0
Temperature sampling cycle: 10 seconds
Relative Humidity Test range: 10% -99%
Humidity Resolution: 1%
Humidity measurement accuracy: 5 (at room temperature 25)%
Size: 48 x 28.6 x 15 (mm)
Display resolution: 0.1
Display: LCD (three and a half)
Power: 0.15 mW under working conditions
Battery: 2 1.5V of LR44 button batteries
5. Yeeco AC 80-300V 100A Din-Rail Digital Multi Function Meter Gauge Multimeter Voltage Current Power Electricity Meter LED Voltmeter Ammeter Volt Amp Power Frequency Factor Monitor
Feature
Tesing range: AC 80-300V; AC 0.00-100.0A; 45.00-65.00Hz; 0.0-30000W; 0.000-99999kmh; 1.000-0.000 power factor; Achieving multi test result shown at the same time which helps you a lot in electronics work0.31" LED display, 4-digit voltage, 5-digit curren/ frequency display (these parameters are shown in RED LED); 5-digit power and electricity display (these parameters are shown in GREEN LED)
With one SAM CK button on the display which used for V/A/W to cos/Hz/kwh display switching, there are indicators beside the corresponding parameters in order to tell you what value does the display show
Size: 54mm x 80mm x 64mm(length x width x height); Din-rail installation; Built-in transformer, measuring instrument loop wires through the hole on the right (11mm hole can pass through the maximum of 12 square (mm) standard copper / meet the maximum load Current 100A
This multimeter can save the value of electric energy and go on cumulating when the meter will power on next time while powering off.Only use this tester gauge to measure 50Hz AC electricity
Description
Accuracy: 1% 2 words
Display Mode:
- AC voltage and power factor use four-digit 0.32 inch red LED;
-AC current and power frequency use five-digit 0.32 inch red LED;
-Active power and electric energy use five-digit 0.32 inch green LED;
Testing Range:
-AC 80.0-300.0V;
-AC0.0-100.0A(when testing current is 100A lower,current display resolution is 0.01A; when testing current is 100A higher,current display resolution is 0.1A; testing range will switch automatically)
-Active power: 0.0-30000W
-Electric energy: 0.000-99999kwh
-Power frequency: 45.00-65.00Hz
-Power factor: 1.000-0.000
Speed: 2 times/second
Size: 54x80x64mm
Installation: Din
Package include:
1xDin-rail multi-function digital meter
6. Cen-Tech Digital Amp Ohm Volt Meter Ac Dc Voltmeter Multimeter,Red
Feature
Test AC/DC voltage, DC current, resistance, transistor and diode, battery testFeatures an easy-to-read 3-1/2 digit LCD display
Automatic zero adjust
Comes with battery and two 32" test leads
Use this multimeter to make precise electronic measurements and tests.
Description
This versatile 7 function digital multimeter provides precise measurements and tests for a variety of electronics. This multimeter tests AC voltage, DC voltage, DC current, continuity, resistance, transistor and battery test. Features an easy-to-read digital LCD display and automatic zero adjust.7. Innova 3320 Auto-Ranging Digital Multimeter
Feature
UL certified product designed to safely and accurately troubleshoot a variety of automotive and household electrical problemsAuto-ranging scales eliminate the need to dial in the correct range when making electronic measurements
Features large digital display and color coded LED's for battery quick check
Single-setting resistance function for AC and DC voltage
Protective rubber corner guards for drop protection
Description
The INNOVA 3320 is a Auto-Ranging Multimeter designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It's auto-ranging scales eliminate the need to dial in the correct range when making electronic measurements. The 10 MegOhm input is safe for automotive and household uses (i.e., household outlets, fuses, wiring, general-purpose batteries, vehicle battery and charging system, automotive circuits and more). The color-coded LEDs allow you to quickly check household batteries (green = good, yellow = weak and red = replace). Includes attachable test leads, holders and stand for hands free use and features protective rubber corner guards for drop protection. The INNOVA 3320 has a single setting resistance function for AC and DC voltage.8. Neoteck Pocket Digital Multimeter 8233D PRO 2000 Counts Auto Ranging Digital Multimeters Digital Multi Tester-DC Current Resistance Diodes Transistor Audible Continuity Tester with Backlit LCD
Feature
Neoteck 2000 Counts 8233D PRO Pocket Digital Multimeter 2000F Capacitance and 200KHz Frequency Measurement, Accurately Measures Current, Voltage, Resistance, and More, Maximum Reading over Time, Auto-ranging and Continuity BuzzerLarge Backlit LCD Display Auto Polarity Display, Easy to Read Large Backlit LCD Display, Back-light Makes a Real Difference in Low Light Areas
CE Rated Digital Mulimeter with Over Load Protection Designed to Safely and Accurately Troubleshoot a Variety of Automotive and Household Electrical
Nice Protective Orange Shell with Stand Built The Case with Our Multimeter is Some Kind of Non Slip, Slightly Soft Plastic that Will Help with Drop Protection, The Stand Places the Device at a 45 Degree Angle and Makes the Screen Easy to See Hands Free
Included 9V Volt BatteryThe Compartment Lid at the Back is Secured by One Cross Head Screw, Not Difficult to Remove at All; Also, Included 2 x Test leads and 2 x Banana Plug to Alligator Clip Cable
Description
All Neoteck Product Comes With 18 Months US Base Warranty
Overview:
Neoteck 8233D PRO multimeter using the word high 15mm LCD display with backlight, even in low light places can clearly read the display value. Is a high performance, high reliability, compact handheld 3 1/2 digit digital multimeter auto range. This Meter is designed to meet IEC 61010-1 & CAT II 600V over voltage category and double insulation. The meter with holster that is giving the main body, though downsized, high resistance against the shock of a drop.
Feature:
- Over load protection: Used the PTC protection circuit for Resistance, frequency measurement
- Double Current Fuses. High quality ,More Safety. Meet For Euro Standard.Safety Class: IEC 61010-1, CAT II 600V
- 2000F Capacitance and 200KHz Frequency measurement
- Make Sound of Continuity test more Loudly
- Back Light
- DATA HOLD function
- Low battery indication
- Auto Power-OFF
- Diode test
Specification:
- DC Voltage: 200mV/2V/20V/200V+-(0.5%+2) 600V+-(0.8%+2)
- AC Voltage: 2V/20V/200V+-(0.9%+3) 600V+-(1.2%+3)
- DC Current: 200uA/2000uA/20mA/200mA/10A+-(1.5%+3)
- AC Current: 200uA/2000uA/20mA/200mA/10A+-(1.5%+4)
- Resistance: 200ohm/2Kohm/20Kohm/200Kohm+-(0.8%+2) 2Mohm/20Mohm+-(1.0%+2)
- Frequency: 200kHz
- Capacitance:2000uF
- Diode check: Resolution: 0.001V, Will display the forward drop voltage
- Continuity check: If measured resistance less than 100, will buzzer is sounded. Sound loudly ,Easliy to hear
- Power Supply: 9V Battery(6F22) (include)
Package Include:
- 1 x Neoteck 8233D Pro Multimeter
- 2 x Test Leads
- 2 x Banana Plug to Alligator Clip Cable
- 1 x User Manual
- 1 x Box
9. Etekcity Digital Clamp Meter Multimeter, MSR-C600 Auto-Ranging Multimeters AC/DC voltmeter Ammeter with Voltage, AC Current, Amp, Volt, Ohm, Diode and Resistance Test Tester
Feature
Autoranging clamp multimeter measures AC currents, AC/DC voltage, resistance, and also provides diode and continuity testsThe clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
Additional features include: Data Hold, Max Reading, and an easy-to-read large LCD
Comes with a handy carrying pouch, perfect for use while you're on the go
Automatically enters sleep mode after 15 minutes of inactivity for energy conservation; 1-year warranty and lifetime support from Etekcity
Description
Etekcity's Digital Clamp Multimeter makes household electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. With a capacity of 400amps, the clip can comfortably extend to test cords and wires up to 28 mm in diameter. The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring. and easier. This device is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses.Specifications
Safety/Compliances: IEC61010 CAT.II 600V, CAT.III 300V over voltage and double insulation
Display: Maximum display 1999
Range selection: Auto ranging
Overload display: Display OL or OL
Measurement Speed: Updates 3 times/second
Max.Jaw Opening: 28mm diameter
Tested Max. Current Conductor Size: 26mm diameter
Diode test: Yes
Continuity test: Yes
Battery Life: about 150hours (alkaline battery)
AC Current:
-Range and Accuracy: 2A{<1A, (4%+40); 1A, (3%+30)}, 20A{4A, (3%+12), >4A, (2%+8)}, 200/400A (1.5%+5)
- Overload Protection: 400A rms
AC Voltage:
- Range and Accuracy: 2/20/200V (1.2%+5), 600V (1.5%+5)
- Input Impedance: 10 M<100pF
- Overload Protection: 600V rms
DC Voltage:
- Range and Accuracy: 200mV (0.8%+3); 2/20/200V (0.8%+1); 600V (1%+3)
- Input Impedance: 10 M
- Overload Protection: 600V rms
Resistance:
- Range and Accuracy: 200 (1.2%+2); 2/20/200K (1%+2); 2M (1.2%+2), 20M (1.5%+2)
- Input Impedance: 10 M
- Overload Protection: 600Vp
Package Includes
1 x Etekcity Digital Clamp Meter
2 x Test Leads (a pair)
2 x AAA 1.5V batteries (installed)
1 x Carrying Bag
1 x User Manual
10. Micsoa Multimeter Test Leads Banana Plug, Digital Multimeter Probes Electrical Test Probe 20A 1000V
Feature
PVC insulated test leads with shrouded universal banana plugs. Work with all brands of meters. Recommended for general purpose measurementsModular probe handles with gold-plated tips make it sharp, accurate and easy to get at small contact points on high-density boards
Provides comfort grip probes with silicone insulated test leads. Heat and cold resistant
Designed for safe use with your multimeter, the leads are rated to CAT III - 1000V for today's electrical environments
One Year Warranty. Great for commercial, industrial, and home use
Recent Comments