Top foam cannon nozzle 1.1 for 2022
If you looking for foam cannon nozzle 1.1 then you are right place. We are searching for the best foam cannon nozzle 1.1 on the market and analyze these products to provide you the best choice.
1. Mingle Foam Cannon Orifice Nozzle Tips and Foam Maker, Universal 1.1 mm Thread Nozzle and Mesh Filter for Snow Foam Lance, 3000 PSI
Feature
ATTENTION: Please screw in the orifice nozzle tighten enough, or it is hard to get thick foam.Include 1 piece of foam maker (mesh filter) and 1 piece of orifice nozzle tips (foam generator nozzle). They assembly inside foam cannon for foam generation. They creates thick foam suds that stick to your car.
If foam cannon works not very well as before, maybe mesh filter wore down and foam cannon orifice tips blocked. You can replace them with new ones and it will recover.
FOAM MAKER: Size: Diameter 0.61 x Height 0.41 inch; foam creator made of stainless steel, work durably in the foam blaster; Filtration accuracy: 100. Max. Pressure: 3000 PSI.
ORIFICE NOZZLE TIPS: NPT male screw nozzles, about 0.28 inch, Orifice Size 1.1 mm. Made of brass, work durably in the foam blaster. Max. Pressure: 3000 PSI.
Description
MINGLE Foam Cannon Foam Maker and Orifice Nozzle Tips from AMZ Tool will make your garden activities more efficient and colorfully, helping people relief the tiredness of spraying and cleaning in the garden.Foam Maker Specifications:
Diameter 0.61 x Height 0.41 inch;
Material: stainless steel;
High pressure: up to 3,000 PSI .
Orifice Nozzle Specifications:
NPT male screw, about 0.28 inch fitting, Orifice Size 1.1 mm;
Material: brass;
high pressure: up to 3,000 PSI .
Application:
Standard foam maker and foam generator nozzles assembly in Snow Foam Lance. Foam blaster mesh filter and foam blaster orifice nozzle are consumable. If foam cannon works not very well as before, maybe mesh filter wore down and foam cannon orifice tips blocked. You can replace them with new ones and it will recover. These product are universal for snow foam lance.
How to replace Foam Maker
1. Pull the inner core out of plastic coat. 2. Pull out the plastic coat and find the foam maker. 3. Replace with new foam maker. 4. Install the Plastic coat and inner core.
How to replace Orifice Nozzle
1. unscrew 1/4 inch quick connector plug. 2. Unscrew foam cannon nozzle with slot screwdriver. 3. Screw new foam cannon nozzle. 4. Screw 1/4 inch quick connector plug.
WARNING:
Serious injury may come from high pressure discharge produced by pressure washers. Please keep out of the reach of human body.
Warranty:
This product is guaranteed against defects for 24 months from date of order.
Our products come with guarantees that cannot be excluded under the American Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
Package List:
1 x Foam Cannon Foam Maker
1 x Foam Cannon Orifice Nozzle Tip
2. RESNSTAR 2 Pack Foam Cannon Orifice Nozzle Tips, Universal Foam Generator Nozzles for Snow Foam Lance (1.1 mm, 3000 PSI)
Feature
Made of premium brass, work durablyUniversal replacement orifice nozzle tips fit most brands of pressure washer
NPT male screw nozzles, about 0.28 inch fitting, orifice size 1.1 mm
Max. Pressure: 3000 PSI 2 pieces of standard
VERY EASY TO USE AND REPLACE
Description
Makes your garden activities more efficient and colorfully, helping u relief the tiredness of spraying and cleaning in the garden.Package Includes:
2 x Foam Cannon Orifice Nozzle Tips
WARNING:
Serious injury may come from high pressure discharge produced by pressure washers, please keep the direction away from people or animal.
3. Blue Homer 1.1 mm Foam Cannon Orifice Nozzle, Universal Thread Tips for Snow Foam Lance, 3000 PSI, 2-Pack
Feature
Universal orifice nozzle to generate thick foam inside foam cannon, 2-packOrifice size 1.1 mm, Male NPT screw fitting, about 0.28 inch. Working Pressure is up to 3000 PSI.
If foam cannon works not very well as before, maybe orifice tip damaged or blocked. You can replace with new one and it will recover.
Include 2 pieces of high replacement foam generator nozzles for snow foam lance. Made of brass, work durably in the foam blaster.
SATISFACTION GUARANTEED: 2 YEARS WARRANTY and FAST REPLY WITHIN 10 HOURS. Blue Homer always stand behind our products, please free to contact us if any questions
Description
Blue Homer Foam Cannon Orifice Nozzle Tips will make your garden activities more efficient, helping people relief the tiredness of cleaning the car.Specifications:
Orifice Size 1.1 mm, male NPT screw fitting, about 0.28 inch;
Material: brass;
Working pressure: up to 3,000 PSI .
Application:
Standard foam generator nozzle for Snow Foam Lance. The orifice nozzle is consumable. If your foam blaster works not very well as before, maybe orifice nozzle blocked or damaged. You can replace it with new one and it will recover. This product is universal for snow foam lance.
How to replace orifice nozzle
1. unscrew 1/4'' quick connect plug. 2. Unscrew foam cannon nozzle with slot screwdriver. 3. Screw new nozzle. 4. Screw 1/4 inch quick connect plug.
WARNING:
Serious injury may come from high pressure discharge produced by pressure washers. Please keep out of the reach of human body.
Warranty:
This product is guaranteed against defects for 24 months from date of order.
Our products come with guarantees that cannot be excluded under the American Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
Package List:
2 x Foam Cannon Orifice Nozzle Tips
4. Mingle Foam Cannon Orifice Nozzle Tips, High Replacement Thread Nozzle for Snow Foam Lance, 1.1 mm, 2-Pack
Feature
Universal orifice nozzle tips in snow foam lance for thick foam generation, Orifice Size 1.1 mmWhen foam cannon works not very well as before, maybe foam cannon orifice tips blocked or damaged. Try to replace it with new orifice nozzle and it will recover.
NPT male screw nozzles, fitting is 0.28 inch. Made of brass, work durably in the foam cannon gun.
Max. Pressure is 3000 PSI. Package List: Two standard foam generator nozzles for foam blaster.
SATISFACTION GUARANTEED: 2 YEARS WARRANTY AND FAST REPLY WITHIN 10 HOURS. AMZ Tool are professional on foam cannon parts and always stand behind our products, please free to contact us if any questions
Description
MINGLE Foam Cannon Orifice Nozzle Tips will make your washing activities more efficient, helping people relief the tiredness of spraying and cleaning.Specifications:
NPT male screw, fitting is 0.28 inch, Orifice Size 1.1 mm;
high pressure: up to 3,000 PSI .
Material: brass;
Application:
Standard foam generator nozzles assembly in Snow Foam Lance. Foam blaster orifice nozzle is consumable. When your foam cannon works not very well as before, maybe your foam cannon orifice tips damaged or blocked. Try to replace it with new one and your foam canon will recover. This product is universal for snow foam lance.
How to replace
1. unscrew 1/4 inch quick connector plug. 2. Unscrew orifice nozzle with slot screwdriver. 3. Screw new orifice nozzle. 4. Screw 1/4 inch quick connector plug.
Package List:
2 x Foam Cannon Orifice Nozzle Tips
WARNING:
Serious injury may come from high pressure discharge produced by pressure washers. Please keep out of the reach of human body.
Warranty:
This product is guaranteed against defects for 24 months from date of order.
Our products come with guarantees that cannot be excluded under the American Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
5. Blue Homer Foam Cannon 1.1 mm Orifice Nozzle Tips and Foam Maker, Universal Accessories for Snow Foam Lance, 3000 PSI, 2-Pack
Feature
Include 1 piece universal 1.1 mm orifice nozzle tip and 1 piece standard foam maker. They are high replacement parts for foam cannon and generate thick foam suds that stick to your car.If foam cannon works not very well as before, maybe foam maker wore down and orifice tip blocked. Please replace them and foam blaster will recover.
ORIFICE NOZZLE: Orifice Size 1.1 mm, Male NPT screw fitting, about 0.28 inch. Made of high quality brass. Working Pressure is up to 3000 PSI.
FOAM MAKER: Size: Diameter 0.61 x Height 0.41 inch; foam creator made of stainless steel, Filtration accuracy: 100.
SATISFACTION GUARANTEED: 2 YEARS WARRANTY and FAST REPLY WITHIN 10 HOURS. Blue Homer always stand behind our products, please free to contact us if any questions
Description
Blue Homer Foam Cannon Orifice Nozzle and Foam Maker will make your washing more efficient, helping people relief the tiredness of clean your car.Foam Maker Specifications:
Diameter 0.61 x Height 0.41 inch;
Material: stainless steel;
Working pressure is up to 3,000 PSI.
Orifice Nozzle Specifications:
Orifice Size 1.1 mm, Male NPT screw fitting, about 0.28 inch;
Material: brass;
Application:
Standard foam maker and foam generator nozzles assembly in Snow Foam Lance. They are universal and consumable. If foam blaster works not very well as before, maybe foam maker wore down and orifice nozzle blocked. Please replace them and foam blaster will recover.
How to replace Foam Maker
1. Pull the inner core out of plastic coat. 2. Pull out the plastic coat and find the foam maker. 3. Replace with new one. 4. Install the Plastic coat and inner core.
How to replace Orifice Nozzle
1. unscrew 1/4'' quick connect plug. 2. Unscrew orifice nozzle with slot screwdriver. 3. Screw new orifice nozzle. 4. Screw 1/4'' quick disconnect plug.
WARNING:
Serious injury may come from high pressure discharge produced by pressure washers. Please keep out of the reach of human body.
Warranty:
This product is guaranteed against defects for 24 months from date of order.
Our products come with guarantees that cannot be excluded under the American Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
Package List:
1 x Foam Cannon Foam Maker
1 x Foam Cannon 1.1 mm Orifice Nozzle.
6. Tool Daily Pressure Washer Foam Cannon for Car Wash, Snow Foam Lance, Additional Orifice Nozzle 1.1mm, 2 L, 1/4"
Feature
Tool Daily 1/4" quick disconnection Foam Cannon with 2 Liter container bottle and additional orifice nozzle 1.1 mm for Foam Blaster. Container bottle has bigger mouth to easily fill in and extra-wide neck to prevent crack issue.EASY to install: fill some soap into the bottle with warm water to get thick foam; Then connect 1/4" quick connection plug to Pressure Washer Gun or Wand. Specification for Pressure Washer: 1000 PSI to 3200 PSI, 2.0 to 5.3 GPM. Finally, adjust the knob to desired foam level and then Snow Foam Lance will disperse thick foam.
Additional orifice nozzle: Backup foam cannon orifice nozzle attachs. 1.1mm orifice nozzle create thicker foam than original one below 2500 PSI. Please use original nozzle if working pressure is higher than 2500 PSI.
Application: ideal for Motorcycle, Car Washing; Roofs, Driveways, Siding washing; floors, Windows washing, it is best product for Detailing Trucks or SUVs
Correlation: hot release no tips bucket filter sealant wax blaster free garden jet wash plastic generation warmer care using ounce design cans turn vehicle maker temp floor variable remover guy tank products enthusiast connectors powder device brush mix black way gpm it sfl bubble truck be wall dispenser mixing chemical container duty brass max tip machines fluid car hydro flow suction liter fittings heavy package washers system rinse kit pot out oz dial guns bar
Description
Our vision:We are committed to providing more efficient and safer garden management tools.
Warranty:
This product is guaranteed against defects for a 2 years warranty.
Our goods come with guarantees that cannot be excluded under the American Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
Feathers
i. Universal 1/4" quick disconnection foam cannon can fit most leading brands such as Karcher, Sun Joe, Honda, Generac, Simpson, Greenworks
ii. Adjustable snow foam lance can mix accurately and generate foam quickly. Fully adjustable dilution with setting dial.
iii. Bottle can be filled in 2 Liter cleaning fluid. Cleaning fluid suction amount and spray angle can be adjusted according to needs
iv. Application: ideal for Motorcycle, Car Washing; Roofs, Driveways, Siding washing; floors, Windows washing.
v. Specification: Material: brass+ABS; Specification: 1000 PSI to 3200 PSI, 2.0 to 5.3 GPM; Max Temperature: 60 / 140; Bottle Capacity: 2L.
How to install
i. Fill some soap into the bottle with warm water;
ii. Connect 1/4" quick connection plug to Pressure Washer Gun or Wand.
iii. Adjust the knob to desired foam level and Snow Foam Lance can disperse thick foam.
Function of orifice tips
1.1mm orifice nozzle create thicker foam than original one below 2500 PSI. Please use original nozzle if working pressure is higher than 2500 PSI.
How to replace with orifice tips
i. unscrew 1/4 inch plug.
ii. Unscrew foam lance nozzle with slot screwdriver.
iii. Screw new orifice nozzle.
vi. Screw 1/4 inch plug.
Package included
1 x foam cannon
1 x foam cannon orifice nozzle 1.1mm
7. TS Tool Supply Foam Cannon Lance 1.10mm Orifice Screw Nozzle tip for Thicker Foam
Feature
Replacement foam cannon orifice1.1mm Diameter
High Quality Brass
Description
Universal replacement screw orifice for most foam cannons.8. Apoulin Foam Cannon Orifice Nozzle - 2Pack1.1mm Orifice Nozzle Tip for Thick Foam 3000 PSI
Feature
WHAT YOU GET? - 2Pack 1.1mm 3000 PSI Brass Foam Cannon Orifice Nozzle.USE - Replacement Foam Cannon Orifice,If Your Foam Cannon Works BadPlease Replace Our Foam Cannon Orifice.
MODEL - Male Screw Nozzles,1.1MM,3000 PSI,0.28 inch Fitting.
MATERIAL - Foam Cannon Orifice Nozzle Made of Bras,Strong and Durable,Make You Work Better.
PROMISE - We offer a 12 month Warranty and 45 Days 100% Money Back or Free Exchange Guarantee. Please feel free to contact us at any time.
Description
UNIYO bring you the highest quality products have the best service !
Replacement Foam Cannon Orifice,If Your Foam Cannon Works BadPlease Replace Our Foam Cannon Orifice.
Male Screw Nozzles,1.1MM,3000 PSI,0.28 inch Fitting.
Foam Cannon Orifice Nozzle Made of Bras,Strong and Durable,Make You Work Better.
Our promise to you: Customers are our top priority
which is why our products offer a lifetime replacement guarantee
so you can be positive you are receiving the highest quality products!
Our highly appreciates all customers' opinions to improve the selling
also if anything you unsatisfied,
pls contact our customer service department for probable best solution.
Scroll Up & amp; Click Add To Cart Now!
9. Tatuo 5 Pack Foam Cannon Orifice Nozzle Tips, Universal Thread Nozzle for Snow Foam Lance, 1.1 mm, 3000 PSI
Feature
Universal orifice nozzle tips in snow foam lance for thick foam generation, orifice Size 1.1 mmNPT male screw nozzles, about 0.299 inch/7.6 mm fitting, made of brass, work durably in the foam cannon gun
If foam cannon works not very well as before, maybe foam cannon orifice tips damaged or blocked; You can replace it with new one and it will recover
Specificationmax pressure is 3000 PSI; Size: Diameter 0.35 x Height 0.433 inch8.9x11mm; Screw diameter is about 0.299 inch/7.6mm fitting
Package list: 5 standard foam generator nozzles for foam blaster
Description
Foam cannon orifice nozzle tips will make your washing activities more efficient, helping people relief the tiredness of spraying and cleaning
Specifications:
NPT male screw, about 0.299 inch/7.6mm fitting, orifice size 1.1 mm.
Product size: diameter 0.35 x Height 0.433 inch8.9x11mmscrew diameter is about 0.299 inch/7.6mm fitting, Orifice Size 1.1 mm.
Material: brass
Max pressure: up to 3,000 PSI.
Application:
Standard foam generator nozzles assembly in Snow Foam Lance. Foam blaster orifice nozzle is consumable. When your foam cannon works not very well as before, maybe your foam cannon orifice tips damaged or blocked. Try to replace it with new one and your foam canon will recover. This product is universal for snow foam lance.
How to replace
1. Unscrew 1/4 inch quick connector plug. 2.Unscrew orifice nozzle with slot screwdriver. 3.Screw new orifice nozzle. 4. Screw 1/4 inch quick connector plug.
Package includes:
5 x Foam cannon orifice nozzle tips
Warning: Serious injury may come from high pressure discharge produced by pressure washers. Please keep out of the reach of human body.
10. REKSIN STAR Foam Cannon Orifice Nozzle Tips, Universal Foam Generator Nozzles for Snow Foam Lance (1.1 mm, 3000 PSI) 2 Pack
Feature
Made of premium brass, work durablyUniversal replacement orifice nozzle tips fit most brands of pressure washer
NPT male screw nozzles, about 0.28 inch fitting, orifice size 1.1 mm
Max. Pressure: 3000 PSI 2 pieces of standard
VERY EASY TO USE AND REPLACE
Description
Makes your garden activities more efficient and colorfully, helping u relief the tiredness of spraying and cleaning in the garden.Package Includes:
2 x Foam Cannon Orifice Nozzle Tips
WARNING:
Serious injury may come from high pressure discharge produced by pressure washers, please keep the direction away from people or animal.
Recent Comments