Top pond pump non submersible
If you looking for pond pump non submersible then you are right place. We are searching for the best pond pump non submersible on the market and analyze these products to provide you the best choice.
1. Simple Deluxe LGPUMP1056G 1056 GPH ULF Listed Submersible Water Pump with 15' Cord, Black
Feature
#1 HAS PRE-FILTER INCLUDED - Pre-filter on the intake prevents debris from entering your pump and extend the life of your pump, Max flow rate: 1056 GPH, Max Lift Height 12ftDURABLE QUALITY - Our Polished Aluminum Oxide Ceramic Impeller Shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts
SAFE & EASY - Safe for fish with no exposed copper. Easy to clean with no tools required to disassemble and clean filter/impeller. Our Electric Cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures
3 size threaded nozzles.83in, 1.06in, 1.34in) - PLEASE NOTE inline and outlet nozzles has different thread size. The thicker ones are for Inline use and the thinner ones are for outlet
VERSATILE - Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems
2. Decdeal Submersible Water Pump DC 12V 5W Ultra-quiet Pump for Pond, Aquarium, 280L/H Lift 300cm
Feature
Brushless, permanent magnetic rotor, maintenance-free.Stator and circuit board sealed by epoxy resin.
The axis is enclosed with static sealing, which can avoid leaking problems.
Adopt high performance stainless steel shaft.
Super long working life (more than 30,000 hours).Small size, high efficiency, low consumption, low noise (less than 35db).
Description
This is a mini size submersible water pump. It's equipped with a brushless motor providing smooth and quiet operation than a non-brushless water pump.
Features:
IP68 waterproof grade, totally submersible in the water.
With a filter, avoiding blocking the inlet.
4 rubber suckers on the bottom, can adsorb on the smooth surface and reduce noise and vibration.
Small size, high efficiency, low noise (less than 35db).
Suitable for aquarium, fountain, car cooling, computer water cooling system and circulation systems.
Note:
1. Please check the voltage and power of the pump power before power on.
2. Please cut off the power before you install/put in/take away the pump from the water; otherwise, the pump can't outlet water due to the air in it.
3. It can be used in the water or other liquids(without particles and impurities); NOT for viscous and acid-base liquids.
4. DO NOT dry burn the pump, otherwise it would be damaged.
5. Switch on-off the power repeatedly for several times to eliminate the air in the pump impeller and the pipe.
Specifications:
Color: Black
Pump material: PC + ABS
Rated Voltage: DC 12V
Max. Power: 5W
Max. Current: 416mA
Max. Flow Quantity: 280L/H
Max. Lift: 300cm / 9.84ft
Noise: Less than 35dB
Outer Dia. of Inlet/Outlet: 8.5mm / 0.33in
Inner Dia. of Inlet/Outlet: 6mm / 0.24in
Waterproof Class: IP68
Max. Liquid Temperature: 60C
Cable Length: 100cm / 39.4in
Product Size: 59.5 * 49 * 42mm / 2.34 * 1.9 * 1.65in
Product Weight: 67g / 2.37oz
Package Size: 6.3 * 6 * 5.4cm / 2.5 * 2.36 * 2.12in
Package Weight: 82g / 2.9oz
Package List:
1 * DC12V Brushless Pump
1 * Filter
1 * User Manual(English)
3. Simple Deluxe 400 GPH UL Listed Submersible Pump with 15' Cord, Water Pump for Fish Tank, Hydroponics, Aquaponics, Fountains, Ponds, Statuary, Aquariums & Inline
Feature
#1 HAS PRE-FILTER INCLUDED - Pre-filter on the intake prevents debris from entering your pump and extend the life of your pump Max flow rate: 400GPH, Max Lift Height 8.2ftDURABLE QUALITY - Our Polished Aluminum Oxide Ceramic Impeller Shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts
SAFE & EASY - Safe for fish with no exposed copper. Easy to clean with no tools required to disassemble and clean filter/impeller. Our Electric Cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures
3 THREADED NOZZLES(0.51in, 0.62in, 0.75in) - Threaded fittings make it more stable. 4 SUCTION CUP at bottom and 15' CORD, so you can stick it on the right side of the aquarium, either vertically or horizontally
VERSATILE - Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems
Description
Simple DeluxeSubmersible Pumpsare quality products, designed using the very latest technological developments.The pumps are suitable for use in hydroponic systems, ponds, aquariums, fountains and filter systems.
Safest Choice- The pumps have been developed on the basis of the so-called synchronous technology, whereby the electrical parts are fully encapsulated in epoxy resin
Reliable - The pumps have an economical, powerful and reliable motor. The entire series are suitable for installation on dry land for in-line use or submersible into the water. Our submersible pumps are equipped with a ceramic shaft and therefore also suitable for use in salt water
Simple Deluxe 400 GPH Submersible Water Pump
- Pre-filter
- 15 ft Waterproof Cord
- Lift Height 8.2 ft
- Product Dimension(Inch) 5.35 x 2.72 x 3.39
- Nozzles 2x0.51 inch, 0.62 inch, 2x0.75 inch
4. Simple Deluxe 290 GPH UL Listed Submersible Pump with 6' Cord, Water Pump for Fish Tank, Hydroponics, Aquaponics, Fountains, Ponds, Statuary, Aquariums & Inline
Feature
#1 HAS PRE-FILTER INCLUDED - Pre-filter on the intake prevents debris from entering your pump and extend the life of your pump, Max flow rate: 290GPH, Max Lift Height 6.3ftDURABLE QUALITY - Our Polished Aluminum Oxide Ceramic Impeller Shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts
SAFE & EASY - Safe for fish with no exposed copper. Easy to clean with no tools required to disassemble and clean filter/impeller. Our Electric Cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures
3 THREADED NOZZLES(0.51in, 0.62in, 0.75in) - Threaded fittings make it more stable. 4 SUCTION CUP at bottom and 6' CORD, so you can stick it on the right side of the aquarium, either vertically or horizontally
VERSATILE - Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems
Description
"Our submersible pumps are quality products, designed using the very latest technological developments. The pumps are suitable for use in hydroponic systems, ponds, aquariums, fountains and filter systems. The pumps have been developed on the basis of the so-called synchronous technology, whereby the electrical parts are fully encapsulated in epoxy resin.The pumps have an economical, powerful and reliable motor. The entire series are suitable for installation on dry land for in-line use or submersible into the water. Our submersible pumps are equipped with a ceramic shaft and therefore also suitable for use in salt water."
5. Little Giant WGP-80-PW Dual Discharge Waterfall and Stream Pump, 673 watts, 3500 GPH
Feature
POND WATER PUMP: A pump is the heartbeat of your waterfall or stream, and this Little Giant 3500 GPH 673-Watt Dual Discharge Waterfall Pump is the perfect heart for water feature.STREAM PUMP: The powerful, direct-drive pump produces mind-blowing starting torque and flow pressure than comparable magnetic drive submersible pumps. Corrosion-resistant body designed for non-potable submersible use.
DUAL DISCHARGE PUMP: With a unique dual-discharge design, this pump allows for operation of 2 water features simultaneously. It can be used in ponds, waterfalls, and streams with up to 2,400 gallons of water and a maximum pumping height of 29 feet.
VERSATILITY: It is extremely versatile and able to be used vertically or horizontally. It is efficient, oil-less and safe for use in your pond.
WATERFALL PUMP WARRANTY: It must be plugged into a proper 120-Volt outlet in order to keep your water moving. It has 3500 GPH capacity, 1-1/4-Inch female pipe thread discharge; 1-1/4-inch barbed adaptor discharge. It provides 3-year warranty.
Description
Specification:
- Cord length: 16 feet
- Horsepower: 5/6 HP
- Voltage: 120V
- Amps: 6.3
- Wattage: 673 watts
- Dimensions: 11 x 6.35 x 8.1 inches
- Weight: 14.68 pounds
- Product warranty: 3-year warranty
With a unique dual-discharge design, this pump allows for operation of 2 water features simultaneously. It can be used in ponds, waterfalls, and streams with up to 2,400 gallons of water and a maximum pumping height of 29 feet. It must be plugged into a proper 120-Volt outlet in order to keep your water moving. It is ideal for use in waterfall and stream applications,
This pump is extremely versatile, able to be used vertically or horizontally. Powerful direct-drive pump produces greater starting torque and flow pressure than comparable magnetic drive submersible pumps. Corrosion resistant body designed for non potable submersible use. 1-1/4-inch female pipe thread discharge, 1-1/4-inch barbed adaptor discharge. Maximum pumping height of 29-feet. 3 year warranty. For up to 2400 gallons. 673 watts. 16-feet cord.
6. Driew Mini Submersible Water Pump, Brushless Water Pump 24V for Pond, Aquarium, Fish Tank Fountain Pumping, 900L/H
Feature
The shell is made of high-quality reinforced ABS,so it is durableWaterproof, amphibious design and equipped with rubber bracket for installation
Support submersible installation and non-submersible installation
DC 24V brushless water pump, Low power consumption, small size & high efficiency
It is suitable for aquarium, fountains, spout and hydroponic systems
Description
Product parameter:
1. Rated voltage: DC24V
2. Do not let the input exceed the rate voltage
3. No-load rated current: Within 0.5A
4. No load water flow: 24V/900L/H
5. H-Max (Lift Height): 24V 6 meters
6. Rated current under load: 1A
7. Suction: The pump has no self-priming function
8. Noise: 35dB MAX (background noise 30dB, within 0.5m)
9. Fluids usage: tap water, groundwater
10. Water temperature: -20C - 60C
11. Environmental Humidity: 45% - 90%
12. Working life under continuous usage: more than 20,000 hours
13. Motor: brushless motor
Package include:
1xWater Pump
7. PonicsPump PP80006: 800 GPH Submersible Pump with 6' Cord - 60W for Hydroponics, Aquaponics, Fountains, Ponds, Statuary, Aquariums, Waterfalls & more. Comes with 1 year limited warranty.
Feature
COMPLETE SELECTION: We have 8 sizes & 19 models. This model has a high quality 6 foot waterproof cord. A similar model with a 16 foot cord is available. Comes with adjustable input flow-rate screen and 3 outlet adaptors for 1/2", 5/8" and 3/4" inside diameter tubing.DURABLE QUALITY: Our Polished Aluminum Oxide Ceramic Impeller Shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts. This pump incorporates a magnetic wet-rotor design, so there is no seal to fail that would damage the pump motor.
EFFICIENT: Neodymium Iron Boron (NdFeB) Magnets are used in all our electric motors because they are the most powerful permanent magnetic materials commercially available and increase energy efficiency. Water-Lubricated Nitrile Bushings are used because they possess a very low coefficient of friction, have inherent vibration-dampening qualities and are non-polluting.
SAFE & EASY: Safe for fish with no exposed copper and oil free. Easy to clean with no tools required to disassemble and clean filter/impeller. Our SJTW Electric Cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures.
SPECIFICATIONS: Salt or fresh water ready with flow Rates of 793 Gallons Per Hour (GPH) @ 0' Lift; 775 GPH @ 1' Lift; 761 GPH @ 2' Lift; 726 GPH @ 3' Lift; 687 GPH @ 4' Lift; 660 GPH @ 5' Lift; 608 GPH @ 6' Lift; 528 GPH @ 7' Lift; 449 GPH @ 8' Lift; 330 GPH @ 9' Lift; 211 GPH @ 10' Lift; 79 GPH @ 11' Lift; Max Lift - 11' 6". Dimensions are 4.84" x 2.72" x 3.82". 120VAC - 60 WATTS - 60Hz. 1 year limited warranty when sold by FasterHarvest (previously PonicsFarms)
Description
PONICSPUMP 800 GPH SUBMERSIBLE PUMP DESIGNED FOR LONG SERVICE LIFEWe designed this 800 Gallon Per Hour (GPH) pump to have a long service life by:
Using aluminum oxide ceramic shaft and bearings which have 3 times the hardness of stainless steel,
Using a powerful permanent magnet wet rotor design that eliminates the need for a seal, which is a common cause of failure, and by
Using a heavy duty waterproof electric cord design to resist oil, grease and moisture while providing abrasion resistance.
Comes with a one year limited warranty.
NEED HELP IN CHOOSING A PUMP?
Please see our guides and specifications in the photo section above.
NEED HELP IN CLEANING YOUR PUMP?
Please see our disassembly / re-assembly guide in the photo section above.
SAFETY WARNING: USE ON GFCI CIRCUIT!
To protect against dangerous electrical shock, always use any submersible pump on an electrical circuit that has Ground Fault Circuit Interrupter (GFCI) at either the plug or the breaker.
One year limited warranty only when product is purchased from FasterHarvest.
8. Anself Ultra-quiet DC12V 4.2W Water Oil Pump Waterproof Submersible for Pond Fountain Circulating
Feature
Brushless, permanent magnetic rotor, maintenance-free.Stator and circuit board sealed by epoxy resin.
Enclosed with static sealing, not dynamic, which can avoid leaking problems.
Small size, high efficiency, low consumption, low noise (less than 35db).
Wide temperature resistance range from 0C to 60C.Used in Aquarium, car cooling, humidifier, air conditioner, other cooling and circulation systems.
Description
This is a compact size submersible water pump(none self-prime). It's built by a brushless motor providing smooth and quiet operation than a non-brushless water pump.Note:
1. It can be used in the water or other liquids(without particles and impurities); NOT for acid and alkali solution.
2. DO NOT dry burn the pump, otherwise it would be damaged;
3. PLEASE let the pump vibrate several times in the water to exhaust air, then it can work normally.
Specifications:
Color: Black
Pump material: ABS
Temperature resistance range: 0 ~ 60C
Condition of use: Continuously
Power consumption: 4.2W
Rated voltage: 12V DC
Max flow rate: 240L/H
Max lift: 300cm / 9.8ft
Noise: Less than 35dB
Outer diameter of inlet / outlet: 9mm / 0.35in
Inner diameter of inlet / outlet: 6mm / 0.24in
Waterproof class: IP68
Product size: 56 * 52 * 47mm / 2.2 * 2 * 1.8in
Product weight: 64g / 2.28oz
Package size: 6.2 * 6.2 * 4cm / 2.44 * 2.44 * 1.57in
Package weight: 77g / 2.73oz
Package List:
1 * Brushless DC Pump
1 * Adapter Plate
9. Simple Deluxe 120 GPH UL UL Listed Submersible Pump with 6' Cord, Water Pump for Fish Tank, Hydroponics, Aquaponics, Fountains, Ponds, Statuary, Aquariums
Feature
WATER FLOW CONTROL - An adjustable knob to control the water flow rate. Max flow rate: 120GPH Max Lift Height: 3.1ftDURABLE QUALITY - Our Polished Aluminum Oxide Ceramic Impeller Shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts
SAFE & EASY - Safe for fish with no exposed copper. Easy to clean with no tools required to disassemble and clean impeller. Our Electric Cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures
COMPACT & MINI SIZE - The mini size makes the pump easy to hide or disguise in the water. Suction cups is great for mounting onto the glass surface. 6ft CORD. Dimensions: 2.56" x 1.65" x 1.95"
VERSATILE - Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems
This is not a food-grade pump. Do not use in the production of food for human consumption
10. Atlantic Water Gardens Pond & Waterfall Pump, Excels in Rigorous Conditions, 2050GPH
Feature
Direct Drive pumps have heavy-duty impellers attached directly to the motor forcleanouts and in-pond applicationsAtlantic SH-Series Direct Drive pumps thrive in dirty water applications, with higher head pressures and solids capability
Oil-free motors are safe for operation in water gardens with fish and plants
Pumps handle solids up to 1" in diameter for the most demanding in-pond and dewatering applications
Overload and thermal protection shuts down pump before overheating can cause damage
Non-corroding, high impact composite housing and stable base geometry make SH-Series the perfect clean-out pump
Recent Comments