Top recommendation for cabinet feet metal adjustable

Finding your suitable cabinet feet metal adjustable is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best cabinet feet metal adjustable including detail information and customer reviews. Let’s find out which is your favorite one.

Product Features Editor's score Go to site
VOVOV Furniture Cabinet Metal Legs Adjustable Stainless Steel Kitchen Feet Round Black and Silver 50 x 50mm Pack of 4 + 16x Screw VOVOV Furniture Cabinet Metal Legs Adjustable Stainless Steel Kitchen Feet Round Black and Silver 50 x 50mm Pack of 4 + 16x Screw
Go to amazon.com
Antrader Metal Adjustable Round Cabinet Sofa Bed Furniture Cabinet Foot legs feet Support Set of 4 with Screws (50x150mm) Antrader Metal Adjustable Round Cabinet Sofa Bed Furniture Cabinet Foot legs feet Support Set of 4 with Screws (50x150mm)
Go to amazon.com
HEVERP (4-Pack) Furniture Cabinet Metal Legs Kitchen Adjustable Stainless Steel Feet Round (10CM) HEVERP (4-Pack) Furniture Cabinet Metal Legs Kitchen Adjustable Stainless Steel Feet Round (10CM)
Go to amazon.com
Heavy Duty Leveler Legs w/Lock Nuts - 8,000 Lb. Capacity Leveling Feet for Furniture, Cabinets, Workbench - 4 Pack Heavy Duty Leveler Legs w/Lock Nuts - 8,000 Lb. Capacity Leveling Feet for Furniture, Cabinets, Workbench - 4 Pack
Go to amazon.com
Angelakerry 4pcs 35cm Furniture Legs Cabinet Feet Aluminum Metal Leg Table Adjustable Square Base Angelakerry 4pcs 35cm Furniture Legs Cabinet Feet Aluminum Metal Leg Table Adjustable Square Base
Go to amazon.com
Tinksky Metal Furniture Legs Kitchen Adjustable Feet Round Furniture Legs- 4pcs(Silver) Tinksky Metal Furniture Legs Kitchen Adjustable Feet Round Furniture Legs- 4pcs(Silver)
Go to amazon.com
Xmada Metal Cabinet Furniture Legs Stainless Steel Cabinet Feet Adjustable Kitchen Feet Round (50 x 50 mm) Xmada Metal Cabinet Furniture Legs Stainless Steel Cabinet Feet Adjustable Kitchen Feet Round (50 x 50 mm)
Go to amazon.com
Antrader Metal Adjustable Round Cabinet Sofa Bed Furniture Cabinet Foot legs feet 50x250mm Set of 4 Come with Attachment Screws Antrader Metal Adjustable Round Cabinet Sofa Bed Furniture Cabinet Foot legs feet 50x250mm Set of 4 Come with Attachment Screws
Go to amazon.com
Furniture Legs Cabinet Metal Owfeel Stainless Steel Metal Adjustable Furniture Leg for Sofa Table Cabinets Shelves Set of 4 50x50mm Furniture Legs Cabinet Metal Owfeel Stainless Steel Metal Adjustable Furniture Leg for Sofa Table Cabinets Shelves Set of 4 50x50mm
Go to amazon.com
PIXNOR Furniture Cabinet Metal Legs Adjustable Stainless Steel Kitchen Feet Round Pack of 4 PIXNOR Furniture Cabinet Metal Legs Adjustable Stainless Steel Kitchen Feet Round Pack of 4
Go to amazon.com
Related posts:

1. VOVOV Furniture Cabinet Metal Legs Adjustable Stainless Steel Kitchen Feet Round Black and Silver 50 x 50mm Pack of 4 + 16x Screw

Feature

Unique design of adjustable height.
Accessories for DIY furniture, cabinets, shelves ect.
Size: 50x50mm (DiaxH);Black Steel Pads Width:60X60Mm (2.35X2.35Inch);Height:50mm/1.96Inch
Made of Stainless Steel durable.
Easy Install, Adjustable Height. Including 16 screw

Description

Feature:

Accessories for DIY furniture, cabinets, shelves ect.
Unique design of adjustable height.
Made of Stainless Steel durable.

Specification:

Material: stainless steel+plastic
Color: black+sliver
Size: approx. 50 x 60 x 50mm/1.97 x 2.36 x 1.97"(Dia x W x H)
Diameter: approx. 5cm/2"
Weight: approx. 317g

Package include:

4x Stainless Steel Table Leg + 16x Screw

2. Antrader Metal Adjustable Round Cabinet Sofa Bed Furniture Cabinet Foot legs feet Support Set of 4 with Screws (50x150mm)

Feature

Package Content:4pcs x Adjustable Furniture Leg, Some Screws ;Weigh:540g; Material: Plastic,Metal.
Product Name:Adjustable Furniture Leg; Color:Silver Tone, Black.
Total Size: 64 x 64 x 150mm / 2.5" x 2.5" x 6"(L*W*H)
Hole Distance:50mm / 2"; Hole Diameter:5mm / 0.2".
Diameter: 50mm / 2" ; Adjustable Height Range: 0-20mm.

Description

The Best Product to Save Your Time and Money!

Package include:
4 x Furniture Legs

Feature:
1.The adjustable furniture leg is ideal for DIY furniture,cabinets, kitchen, furniture, office,shelves and so on.
2.It is adjustable and easy to install.
3.It's convenient for your life,it can also protect and decorate your furniture.
4.It is ideal, sturdy, very easy to fit and aesthetically pleasing.
5.Hard and durable material for long time use.
Come with attachment screws.

Welcome to our store! Enjoy quality and healthy life! We dare to use the new, heart, innovation to supply the best quality products! Any problem please feel free to contact us first so that we can supply the best service for you.

3. HEVERP (4-Pack) Furniture Cabinet Metal Legs Kitchen Adjustable Stainless Steel Feet Round (10CM)

Feature

Color: Silver, black. Material: stainless steel
Height (adjustable): Max. height 11.5cm /4.53 inch
Mini. height 10cm /3.94 inch. Diameter: 2 inch/5cm
Good accessories for DIY furniture, cabinets, shelves,and come with screws
Hard and durable material for long time use

Description

Description
This item is a pack of 4pcs stainless steel furniture legs, which features hard and durable material. With adjustable design, great accessories for DIY furniture, cabinets, shelves.
Note: The color of the item may vary slightly due to photography and your own computer

Features
- Material: stainless steel.
- Color: black+silver
- Height (adjustable): Max. height 11.5cm / 4.53 inch
- Mini. height 10cm / 3.94 inch.
- Diameter: 2 inch / 5cm.
- Accessories for DIY furniture, cabinets, shelves.
- Hard and durable material for long time use.

Package Including
4x (10CM)Stainless Steel Table Legs with screws
Questions & Answers

Questions:
What is the minimum and maximum height on these?
Answer:
3.92" is the minimum. By unscrewing the "lid", at most you'll gain 1/2 inch making the max 3.9 and 0.5 in

Question:
Do these adjust slightly for leveling out the unit they are used on or do they adjust from one certain height to another?
Answer:
You adjust the height by twisting the bottom of the feet. This allows for "fine tuning." If I recall, I believe the max adjustment is at least a centimeter or more.

Question:
Do these come with screws? If so, how deep are they? Thanks
Answer:
4 screws per foot. There are 0.62" length.

Question:
Can be used for sofa?
Answer:
yes , but there not very heavy duty. Has plastic treads and sleeve. My guess is they would be too light to carry that much load. However, if all four corners are securely mounted and you avoid any lateral pressure (ie. sliding sofa across floor or carpet instead of carrying) you could potentially get away with it for awhile. They would most likely not take any abuse. Hope this helps.

4. Heavy Duty Leveler Legs w/Lock Nuts - 8,000 Lb. Capacity Leveling Feet for Furniture, Cabinets, Workbench - 4 Pack

Feature

HEAVY DUTY - Made from 14 ga. (.080") steel. Load capacity is 2,000 lbs. per leg
INTEGRAL LEDGER - Ensures that the load is carried by the leveler, not the screws
LOCK NUTS INCLUDED - An absolute MUST for the workshop or garage, especially if any vibrating machinery is involved.
FREE SPINNING FOOT - Compensates for irregular floors. Polyethylene cap protects floors as it keeps moisture away
YOU GET - 4 Legs, 16 Installation screws (#10 x 3/4"), 5mm hex wrench

Description

Got a 8,000 lb. workbench that needs leveling?... Read On!
D.H.S. is pleased to offer a leveler that's tough as nails, but as easy to install as it is to adjust.

Real Steel
Housings are made from 14 ga. (.080"), zinc plated steel. Each has a 7/16" wide ledger that hooks under the cabinet. This ensures the load gets carried directly on the leveler, not the screws. BTW the screws we provide are no joke. They're 3/4" long #10 Philips head (nickel plated), perfect for supporting a bookcase with plywood sides or a workbench with 4 x 4 legs.

Versatile Threaded Leg
The legs have a 10mm dia. (a heavy 3/8") shaft that adjusts from 0" to 2-1/2". The feet are 1-1/4" dia. and spin freely on the threaded shaft. This allows them to tilt if your floor is really bad. Adjustments are easier too, as you won't be fighting the friction of the entire foot rubbing against the floor as it's being turned. Black polyethylene caps protect your floor and block any moisture from getting to the foot.

Lock Nuts Included
These are a MUST for the workshop or garage, especially if vibrating equipment is involved. Just level the piece out and then snug the nuts up against the bottom of the housing. BTW, these are 10mm lock nuts, which would have been quite expensive if you had to provide them yourself.

Installation
Could it be any easier? Just hook them onto the cabinet and attach with the provided screws. The whole thing could be done in 5 minutes (and that assumes you're taking it easy).

Adjustment
If you're able to reach below, it's easiest to just use a pry bar to lift the cabinet and turn the shaft with your fingers. If access is limited, use the provided 5mm hex wrench. An access hole can also be drilled in the cabinet floor to get the wrench through.

Here's what you get...
- 4 Heavy Duty Leg levelers w/lock nuts
- 16 Pan head screws (#10 x 3/4")
- 5 mm Hex wrench

5. Angelakerry 4pcs 35cm Furniture Legs Cabinet Feet Aluminum Metal Leg Table Adjustable Square Base

Feature

Condition: 100% Brand new.
Material: Aluminum Alloys
Screws was include
Leg bottom can adjustable
Great for cabinets,showcase or other table furniture.

Description

Product Description:
Condition: 100% Brand new.
Material: Aluminum Alloys
Leg bottom can adjustable
Screws was include

Great for cabinets,showcase or other table furniture.

Size like picture. Manual measurement, there is error about 1mm.

Please Note:
Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc.
The color tone of the website's photo and the actual item could be slightly different.
Please contact us before leaving Negative or Neutral feedback we will be happy to work with you.

Our shop has many kinds of bottles and studs.
Welcome Wholesale.

6. Tinksky Metal Furniture Legs Kitchen Adjustable Feet Round Furniture Legs- 4pcs(Silver)

Feature

Color: Silver, black. Material: stainless steel.
Height (adjustable): Max. height 11.5cm 4.53 inch
Mini. height 10cm 3.94 inch. Diameter: 2 inch 5cm.
Accessories for DIY furniture, cabinets, shelves.
Hard and durable material for long time use.

Description

Description
This item is a pack of 4pcs stainless steel furniture legs, which features hard and durable material. With adjustable design, great accessories for DIY furniture, cabinets, shelves.

Features
- Material: stainless steel.
- Height (adjustable): Max. height 11.5cm / 4.53 inch
- Mini. height 10cm / 3.94 inch.
- Diameter: 2 inch / 5cm.
- Accessories for DIY furniture, cabinets, shelves.
- Hard and durable material for long time use.


Package Including
4 *nbsp;Metal Furniture Legs Kitchen Adjustable Feet Round Furniture Legs(Silver)

7. Xmada Metal Cabinet Furniture Legs Stainless Steel Cabinet Feet Adjustable Kitchen Feet Round (50 x 50 mm)

Feature

Material: Stainless steel pipe + cold-rolled steel baseboard + nylon plastic adjustable block.
High quality screw holes: High-precision drilling technique, smooth to install and durable in use.
Size: 50 x 50mm/1.97 x 1.97inch (D x H). Adjustable height: 15mm/0.59inch.
Package: 4 x adjustable furniture legs.
Application: Suitable for furniture legs of cabinet, couch, coffee table, TV cabinet, bed, wardrobe, office furniture, etc.

Description

Description:
The metal adjustable furniture legs is made of stainless steel, waterproof, rustproof and anti-corrosion. Selected quality material and exquisite process make it very durable in use. Widely used in installing furniture legs of cabinet, couch, coffee table, TV cabinet, bed, wardrobe, office furniture, etc.

Features:
Material: Stainless steel.
Size: 50 x 50mm/1.97 x 1.97inch (D x H).
Adjustable height: 1.5cm
Screw holes: High-precision drilling technique, smooth to install and durable in use.
High-precision stainless steel: Surface wiredrawing process, rustproof and corrosion resistant.
Square baseboard: Cold-rolled steel material, rustproof.
Adjustable block: Nylon material, waterproof and corrosion-proof.
Super load bearing.
Application: Suitable for furniture legs of cabinet, couch, coffee table, TV cabinet, bed, wardrobe, office furniture, etc.

Package:
4 x adjustable furniture legs

8. Antrader Metal Adjustable Round Cabinet Sofa Bed Furniture Cabinet Foot legs feet 50x250mm Set of 4 Come with Attachment Screws

Feature

Package Content:4pcs x Adjustable Furniture Leg, 16pcs x Attachment Screws;Weigh:749g;Material:Plastic,Metal.
Product Name:Adjustable Furniture Leg, Some Screws; Color:Silver Tone, Black.
Total Size:64 x 64 x 250mm / 2.5" x 2.5" x 10"(L*W*H).
Hole Distance:50mm / 2"; Hole Diameter:5mm / 0.2".
Diameter:50mm / 2" ; Adjustable Height Range: 0-20mm.

Description

The Best Product to Save Your Time and Money!

Package include:
4 x Furniture Legs

Feature:
1.The adjustable furniture leg is ideal for DIY furniture,cabinets, kitchen, furniture, office,shelves and so on.
2.It's convenient for your life,it can also protect and decorate your furniture.
3.Hard and durable material for long time use.
Attachment Screws are included


Welcome to our store! Enjoy quality and healthy life! We dare to use the new, heart, innovation to supply the best quality products! Any problem please feel free to contact us first so that we can supply the best service for you.

9. Furniture Legs Cabinet Metal Owfeel Stainless Steel Metal Adjustable Furniture Leg for Sofa Table Cabinets Shelves Set of 4 50x50mm

Feature

1. Main Materil Stainless Steel
2. Adjustable Height Furniture Legs, Accessories Of Sofa, Table, Cabinets,Shelves And Etc.
3. Maximum Load 200Kg.
4. Size:Botton Pads:63X63Mm (2.48X1.48Inch);Height:48Mm/1.88Inch;Diameter: 50Mm/1.96Inch
5. Easy Install, Adjustable Height.

Description

Products Description:
Set Of 4 Pcs Furniture Legs, Using For Installing On The Botton Of Sofa, Table, Cabinets,Shelves And Etc.

Feature:
Black Steel Pads:60X60Mm (2.35X2.35Inch)
Height: 50Mm/1.96Inch
Adjustable Height: 0- 15mm (0.69inch)
Maximum Height: 65mm(2.55inch)
Diameter: 50Mm/1.96Inch
Weight: 92G/Pc
Cylinder Part:201 Stainless Steel
Black Steel Pads:Anticorrosive Steel
Round Black Feet:Anticorrosive Nylon

Package:
4X Furniture Legs
Package Without Screws

10. PIXNOR Furniture Cabinet Metal Legs Adjustable Stainless Steel Kitchen Feet Round Pack of 4

Feature

Color: Silver, black. Material: stainless steel.
Size: Approx. 50 x 60 x 50mm/1.97 x 2.36 x 1.97"(D x W x H).
Accessories for DIY furniture, cabinets, shelves.
Hard and durable material for long time use.

Description

Description

This item is a pack of 4pcs stainless steel furniture legs, which features hard and durable material. With adjustable design, great accessories for DIY furniture, cabinets, shelves.

Features

- Color: Silver, black.
- Material: stainless steel.
- Size: Approx. 50 x 60 x 50mm/1.97 x 2.36 x 1.97"(D x W x H).
- Accessories for DIY furniture, cabinets, shelves.
- Hard and durable material for long time use.

Package Including
4 * Stainless Steel Kitchen Adjustable Feet Round Furniture Legs (Silver)

Conclusion

All above are our suggestions for cabinet feet metal adjustable. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using cabinet feet metal adjustable with us by comment in this post. Thank you!

You may also like...