Top recommendation for strike plate mortise template
Finding your suitable strike plate mortise template is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best strike plate mortise template including detail information and customer reviews. Let’s find out which is your favorite one.
1. Milescraft 1213 Complete Door Mortising Kit
Feature
Increase security and privacy in your home by replacing interior and exterior doorsBy routing matching mortises for hinges, strike plates, and latch plates into the door and jamb
Featuring an easy to use drop-in template design with a sturdy steel frame
Easy to use drop in template design with clearly marked templates
Sturdy steel template frame with door thickness selector knob for 1-3/4 and 1-3/8-Inch doors
Includes durable tungsten carbide tipped router bit with ball bearing eliminating the need for guide bushings on your router
Centered tape measure tabs and easy measure guide ensure correct and precise installation of door hardware
Reusable packaging for template storage when not in use
Description
Increase Security And Privacy In Your Home By Replacing Interior And Exterior Doors Without Damaging The Jamb Or Door Frame With The Doormortisekit From Milescraft. By Routing Matching Mortises For Hinges, Strike Plates, And Latch Plates Into The Door And Jamb, You Won'T Have To Tear A Hole In The Wall Just To Hang A Better Wooden Door. Featuring An Easy To Use Drop-In Template Design With A Sturdy Steel Frame, This Kit Comes With Everything You Need For Most Hinges, Strike Plates, And Latch Plates On 1-3/4" And 1-3/8" Doors And Jambs. Simply Set The Door Thickness Selector Knob, Attach To The Door Or Jamb, Drop In The Plainly Marked Template For Your Door Hardware, And Rout. Includes A Durable Tungsten Carbide Tipped 1/2" Router Bit With Ball Bearing, Eliminating The Need For Guide Bushings. Also Includes An Easy Measure Guide Where We Have Done The Math And Made It Simple For You To Get Standard Industry Placement Of Your Door Hardware. Centered Tabs On Each Template Ensure Complete Accuracy. This Product Is Packaged In A Clamshell That Snaps Shut To Act As A Hanging Storage Container For Your Templates When Not In Use. Simply Cut Off The Package Seal Edge When Opening For Reuse. For Best Results, Milescraft Recommends Applying 2-4 Pieces Of Tape To The Templates. Kit Includes The Following Templates.2. PORTER-CABLE 59375 Strike and Latch Template
Feature
Mortises latch and strike plate openings with any collet router measuring 1/4 inchUsed to rout both the strike and latch plate on doors and frames
Accommodates doors of various thickness: 1-3/8-inch, 1-3/4-inch, 2-inch, 2-1/4-inch, and 2-1/2-inch
Accommodates both 2-1/4-inch and 2-3/4-inch strike plate sizes
Template center marks enable quick and easy alignment; Extended template platform provides excellent router stability
Description
Amazon.com Why hire a locksmith or struggle with a chisel when you can install doorknobs yourself with minimal effort? The Porter-Cable 59375 is a professional quality kit that makes it a snap to mortise latch and strike plate openings with any collet router measuring 1/4 inch. The various settings for strike and latch plate sizes ensure precise results. (The strike plate sizes include 1-1/8-by-2-3/4 inches, 1-1/2-by-2-1/4 inches, and 1-1/2-by-2-3/4 inches and latch plate sizes of 1-by-2-1/4 inches, 1-1/8-by-2-1/4 inches, and 1-1/8-by-2-3/4 inches.) Compatible with doors with a thickness of 1-3/8 inches and 1-3/4 inches, the 59375 comes with a high-speed steel router bit and bearings, brads, and instruction manual.3. Baldwin 6040150 Estate-Parts Satin Nickel Strike Plate Part
Feature
LOCK ESTATEDescription
Latch / Deadbolt Entrance Mortise StrikeThickness:0.093" (2.3mm), brass materialScrews:Furnished with 12 combination wood / machine screws. finished to match.Template:Designed to fit metal / wood frames prepared in accordance to ANSI A115.1 / A115.11.Features:Furnished flat with rounded lip edges for universal use with left and locksCurved Lip:Available with a curved lip. Supplied standard with all locks incorporating a solid-type latch bolt.Size:Base: 1.25" x 4.875" (32 x 124mm) x 1.25" (32mm) Lip to CenterLatch and deadbolt function with 2-3/4" backset latchSupplied standard with all locksAnti -friction latch boltFor use with locks incorporating a .625" (16mm) wide latch bolt (6000 Series).4. Woodhaven 8590 4-7/8" T-Strike Plate Jig
Feature
1-1/4" x 4-7/8" T-Strike Plate Jig with 3-3/8" wide TeeFastest, easiest, least expensive and most accurate way to cut a strike plate mortise. Clamps to work so there's no nail holes or other unsightly blemishes!
Made of 10mm (.393") thick phenolic for heavy duty use, measures 3-5/8" x 7-5/8".
Uses a bearing guided bit (our 8500 or 8505 - sold separetly), or bushing & bit combination (5030K & 13416 - sold separately), to follow the jig for perfect mortises.
Lifetime guarantee against defects in material or workmanship. Made in the USA!
Description
Woodhaven 8590 4-7/8" T-Strike Plate Jig5. MILESCRAFT HingeMate350 Entry and Passage Door Hinge Jig
Feature
Templates for 2-1/2", 3", 3-1/2", 4" and 4-1/2" hinges; 1-1/8 x 2-3/4, 1-1/2 x 2-1/4 strike plates; 1" x 2-1/4", 1-1/8" x 2-1/4", and 1-1/8" x 2-3/4" latch platesSturdy steel frame adjusts from 1-3/8" to 1-3/4" doors and jambs
Centered tabs on each template ensure complete accuracy
Includes 1/2" router bit with bearing, spring-loaded corner chisel and self-centering hinge bit
Easy Measure Guide is included to simplify standard industry placement of your door hardware
Description
Increase security and privacy in your home by replacing interior and exterior doors without damaging the jamb or door frame with the HingeMate350 Door Mortise Kit from Milescraft. #1220 Door Mortise Kit includes templates for 2-1/2", 3", 3-1/2", 4" and 4-1/2" hinges; 1-1/8" x 2-3/4", 1-1/2" x 2-1/4" strike plates; 1" x 2-1/4", 1-1/8" x 2-1/4", and 1-1/8" x 2-3/4" latch plates. Sturdy steel frame adjusts from 1-3/8" to 1-3/4" doors and jambs. Includes durable carbide-tipped 1/2" router bit with bearing that eliminates the need for guide bushings, spring-loaded corner chisel for squaring routed corners and self-centering hinge bit.6. Templaco MS-400 Multi-Strike Template - 16" Carrier w/ 2 Deadbolt, 1 Full Lip and 1 "T" Pocket
Feature
Of 1" X 2-1/4" Deadbolt, 1" X 2-1/4" Full-Lip, 1-1/8" X 2-3/4" T And 1-1/8" X 2-3/4" DeadboltIncludes 2 Center Locators And Attaching Nail Assemblies
Tack-On Template Will Produce 4 Strike Mortises With Finish Sizes
7. Barska Biometric Door Lock Reversible Handle, Black
Feature
DIY-easy installation, no other hardware neededThree master-print enrolls or eliminates other users fingerprints
Three access methods: fingerprint, pin code and emergency back up keys
Reversible handle fits either left or right opening doors
Included Accessories: Front Plate (including rubber gasket), Back Plate (including rubber gasket), Tubular Latch Mortise, Strike Plate, Strike Box, Two Mechanical Keys, Installation Template, Accessories Pack and Four AA Batteries
Description
Safely secure a room with the security of a fingerprint with the Barska Biometric Security Door Lock. The perfect security solution to almost any home or office. Ideal for indoor, residential, and commercial use to replace traditional door knob. The handle can be reversed to accommodate either left or right opening doors. Powered by 4 AA batteries that can last up to one year depending on usage. Three access methods - Up to 100 fingerprints with 3 master users - One, seven digit pin code - Back-up emergency keys, included.8. Schlage Electronics PB405 Electrified Deadbolt Lock, Satin Aluminum Finish
Feature
Mortise electrified deadbolt lock works with an electronic door access system (sold separately) to secure a door and prevent unauthorized entryAutomatic relocking switch includes a programmable relock delay of three, five, or nine seconds
Magnetic door sensor communicates with the system to identify an open or closed door
Finish is satin aluminum
Fail-safe design unlocks when power is removed
Description
The Schlage Electronics PB405 electrified deadbolt lock with satin-aluminum finish works with an electronic door access system (sold separately) to secure a door and prevent unauthorized entry. The deadbolt has a rectangular face and a built-in automatic relock option that can be programmed to delay relocking by three, five, or nine seconds. The magnetic door sensor communicates with the system to identify an open or closed door. The bolt is active when connected to a power source, and retreats and unlocks when power is removed either through a signal from the door access system or by power outage (also called a fail-safe design).
Specifications | |
---|---|
Overall dimensions | 7.87 x 1.26 x 1.57 inches (H x W x D)* |
Bolt diameter | 0.61" |
Bolt throw | 0.67" |
Current draw | 0.9A at 12V, 0.45A at 24V |
Power | 12V or 24V |
Weight | 1.9 lb. |
*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
For more information, see the manufacturer's literature.
Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.
What's in the Box?
- Schlage Electronics PB405 deadbolt lock
- Strike plate
- Large shims for lock body
- Small shims for strike plate
- Templates
- Six-pin connector
9. Milescraft 73180003 Hinge Mortise Kit Bundle
Feature
Receive a Milescraft DoorMortiseKit (1213) and a SandDevil3.0 (1605)DoorMortiseKit has a durable steel frame with adjustable cams which allows for 1-3/4" and 1-3/8" door settings
Contains templates needed to route strike plate, latch plate and hinge mortises, in 5 sizes: 2-1/2", 3", 3-1/2", 4", 4-1/2", also includes a 1/2" Router bit (made of durable tungsten carbide)
SandDevil3.0 has 5 different sanding surfaces for many different applications including flat, angled, curved and edge sanding
Description
The Milescraft DoorMortiseKit Bundle comes with the Milescraft DoorMortiseKit (1213) and the Milescraft SandDevil3.0 (1605). SAVE 20% off MSRP! Increase security and privacy in your home by replacing doors without damaging the door or jamb with the DoorMortiseKit. By routing matching mortises for hinges into the door and jamb, you wont have to tear a hole in the wall just to hang a better wooden door. This kit includes a durable steel frame with adjustable cams that allow for 1-3/4" and 1-3/8" door settings, a 1/2" router bit made of durable tungsten carbide with a ball bearing to eliminate the need for a bushing, also contains templates needed to route hinge mortises, in 5 sizes: 2-1/2", 3", 3-1/2", 4" and 4-1/2". You can also rotate your template to achieve 5/8" radius or a 1/4" radius. You will also receive the Milescraft SandDevil3.0. It has 5 different sanding surfaces for many different applications, including flat, angled, curved and edge sanding. This sanding tool makes it easy to change abrasive belts quickly and easily, using the patented Clever Lever. To save time, many users keep more than one SandDevil handy, each with a different Grit. Includes a standard 3" x 21" sanding belt, #80 grit cloth backed.10. Hinge Mate HM-1100W Door Hinge Template II
Feature
Door hinge template; 5-inch maximum hinge capacity; 1-3/4-inch maximum jam thicknessAccurately set hinges in minutes; doors, strike plates, boxes, or edge routing projects
Made of durable, lightweight anodized aluminum
Includes 1/2-inch diameter bit with top bearing
4.65-pounds; handy storage case included
Recent Comments