Where to find filament makerbot?
When you looking for filament makerbot, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable filament makerbot is not an easy task. In this post, we show you how to find the right filament makerbot along with our top-rated reviews. Please check out our suggestions to find the best filament makerbot for you.
1. MakerBot MP06572 Large 10-Pack PLA Filament, Spool, 1.75 millimeters Diameter (Pack of 10)
Feature
HIGH QUALITY PLA FILAMENT: MakerBot PLA Filament is the highest quality PLA 3D printing material available and is formulated specifically for MakerBot Desktop 3D Printers. It delivers higher-quality prints, reduces jams and clogs, and offers professional dimensional accuracy.SAFE FOR THE CLASSROOM, OFFICE, AND DESKTOP: Our PLA Filament is a non-toxic bioplastic made from corn. It's safer than ABS, certified biodegradable, and can be printed on MakerBot's open 3D printers in any well ventilated area.
TESTED AND OPTIMIZED FOR RELIABILITY: Unlike other 3D printing materials, MakerBot PLA Filament was developed custom for MakerBot hardware and software. It offers industry-leading quality at 100-micron and 200-micro layer height resolution, excellent surface quality, and is trusted by Fortune 500 companies around the world.
WIDE SELECTION OF RICH COLORS: MakerBot's PLA Filament comes in a variety of colors; inspiring and fun for schools and classrooms, and versatile for designers and professionals. Our TRUE colors are perfect for detailed prints and give a professional glossy look and feel.
LESS WARPING THAN ABS, NO HEATED BUILD PLATE REQUIRED: MakerBot PLA Filament prints with less warping and curling than ABS, and doesn't require a heated build plate or chamber to deliver high quality, accurate parts.
Description
At MakerBot, we believe there is an innovator in everyone.MakerBot PLA Filament is the highest quality PLA 3D printing material available. Save time and money when your order this 10-Pack, and get 1 of each of the following rich MakerBot True colors: Red, Orange, Yellow, Green, Blue, Purple, White, Warm Gray, Cool Gray, and Black. It was formulated specifically for MakerBot 3D printers and software to provide consistent, reliable performance, high dimensional accuracy, and professional quality. Its a non-toxic bioplastic derived from corn that is certified biodegradable, making its well as classroom, office, and desktop safe.
MakerBot. Ideas in the Making.
2. MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, White
Feature
The best and most consistent PLA filament for your MakerBot 3D PrinterComprehensively quality tested at both 100-micron and 200-micron layer resolutions
Guaranteed to have no heavy metals, phthalates, or BPA
Compatible with the MakerBot Replicator (Fifth Generation), MakerBot Replicator 2, and MakerBot Replicator Z18
Description
MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers.
MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is guaranteed to have no heavy metals, phthalates, or BPA.
Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer.
If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints.
Compatible with the MakerBot Replicator 2, MakerBot Replicator (Fifth Generation), MakerBot Replicator Z18.
Glass Temp: 60-65 C (140-149 F)
Melting Temp: 150-160 C (302-320 F)
Nozzle Temp: 230 C (446 F)
Spool Diameter: 9 in
Spool Width: 2 in
Spool Hub Hole: 2 in
Diameter 1.75 mm
Net Weight: 2 lbs.
3. MakerBot ABS Filament, 1.75 mm Diameter, 1 kg Spool, Black
Feature
The best and most consistent ABS filament for your MakerBot Replicator 2X Experimental 3D PrinterEvery filament color undergoes long duration testing to ensure that there are no deviances in print quality. Every millimeter of MakerBot filament has been subjected to stringent laser testing
Consistently round diameter ensures highest print quality and consistent flow through the extruder nozzle
Optimized for the MakerBot Replicator 2X. Not compatible with the Makerbot Replicator 2, Replicator (Fifth Generation), Replicator Mini, or Replicator Z18
Description
MakerBot ABS Filament is the best, most consistent ABS filament for MakerBot Replicator 2X Experimental 3D Printers.Each filament color is comprehensively quality tested at both 100 micron and 200 micron layer resolutions on the MakerBot Replicator 2X to verify it will perform every feature that MakerBot MakerWare software offers and reliably slice and print every type of 3D model.
Every filament color undergoes long duration testing to ensure that there are no deviances in print quality. Every millimeter of MakerBot filament has been subjected to stringent laser testing.
Consistently round diameter ensures highest print quality and consistent flow through the extruder nozzle.
MakerBot ABS Filament adheres well to kapton tape on heated build plate. MakerBot ABS Filament requires a heated build platform. Also, ensure your build plate is level, clean and oil-free. Use MakerBot ABS Filament in a well-ventilated area.
Glass Temp: 105 C (221 F)
Melting Temp: Amorphous, no true melting point
Nozzle Temp: 230 C (446 F)
Spool Diameter: 8 in
Spool Width: 3 in
Spool Hub Hole: 2 in
Diameter: 1.75 mm
Shipping Weight: 1.36 kg (3.0 lbs)
Net Weight: 1 kg (2.2 lbs).
4. Makerbot 1.75mm PLA Filament (Small Spool, 10-pack)
Feature
This 10-pack of 1.75mm PLA Filament from MakerBot contains one small, 0.5 lb spool of each MakerBot True Color filament - True Red, True Orange, True Yellow, True Green, True Blue, True Purple, True Black, True White, Cool Gray, and Warm Gray. This filament is designed for use with the MakerBot Mini 3D Printer. Since PLA, or polylactic acid, is a bioplastic derived from corn, it doesn't emit toxic fumes when melted in the course of 3D printingDescription
This 10-pack of 1.75mm PLA Filament from MakerBot contains one small, 0.5 lb spool of each MakerBot True Color filament - True Red, True Orange, True Yellow, True Green, True Blue, True Purple, True Black, True White, Cool Gray, and Warm Gray. This filament is designed for use with the MakerBot Mini 3D Printer. Since PLA, or polylactic acid, is a bioplastic derived from corn, it doesn't emit toxic fumes when melted in the course of 3D printing5. MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, White
Feature
The best and most consistent PLA filament for your MakerBot Replicator 3D PrinterComprehensively quality tested at both 100-micron and 200-micron layer resolutions
Guaranteed to have no heavy metals, phthalates, or BPA
Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer
Description
MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers.
MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is guaranteed to have no heavy metals, phthalates, or BPA.
Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer.
If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints.
Optimized for the MakerBot Replicator Mini. Also compatible with the MakerBot Replicator 2 and MakerBot Replicator (Fifth Generation).
Glass Temp: 60-65 C (140-149 F)
Melting Temp: 150-160 C (302-320 F)
Nozzle Temp: 230 C (446 F)
Spool Diameter: 5.9 in
Spool Width: 1.6 in
Spool Hub Hole: 2 in
Filament Diameter 1.75 mm
Net Weight: 0.5 lbs.
6. MakerBot MP05778 PLA Filament, 1.75 mm Diameter, Large Spool, Purple
Feature
The best and most consistent PLA filament for your MakerBot 3D PrinterComprehensively quality tested at both 100-micron and 200-micron layer resolutions
Guaranteed to have no heavy metals, phthalates, or BPA
Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer
Description
MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers.
MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is guaranteed to have no heavy metals, phthalates, or BPA.
Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer.
If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints.
Compatible with the MakerBot Replicator 2, MakerBot Replicator (Fifth Generation), MakerBot Replicator Z18.
Glass Temp: 60-65 C (140-149 F)
Melting Temp: 150-160 C (302-320 F)
Nozzle Temp: 230 C (446 F)
Spool Diameter: 9 in
Spool Width: 2 in
Spool Hub Hole: 2 in
Diameter 1.75 mm
Net Weight: 2 lbs.
7. MakerBot 1.75mm/0.07" Small Spool 3D Printer PLA Filament, Pack of 10
Feature
UPC: 817913012125Weight: 8.950 lbs
Description
True Green, True Blue, True Purple, True White, True Red, True Orange, True Yellow, Cool Gray, Warm Gray, True Black8. MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, Green
Feature
The best and most consistent PLA filament for your MakerBot Replicator 3D PrinterComprehensively quality tested at both 100-micron and 200-micron layer resolutions
Guaranteed to have no heavy metals, phthalates, or BPA
Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer
Description
MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers.
MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is guaranteed to have no heavy metals, phthalates, or BPA.
Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer.
If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints.
Optimized for the MakerBot Replicator Mini. Also compatible with the MakerBot Replicator 2 and MakerBot Replicator (Fifth Generation).
Glass Temp: 60-65 C (140-149 F)
Melting Temp: 150-160 C (302-320 F)
Nozzle Temp: 230 C (446 F)
Spool Diameter: 5.9 in
Spool Width: 1.6 in
Spool Hub Hole: 2 in
Filament Diameter 1.75 mm
Net Weight: 0.5 lbs.
9. MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Glow in The Dark, Green
Feature
The best and most consistent PLA filament for your MakerBot 3D PrinterComprehensively quality tested at both 100-micron and 200-micron layer resolutions
Guaranteed to have no heavy metals, phthalates, or BPA
Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer
Description
MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers.
MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is guaranteed to have no heavy metals, phthalates, or BPA.
Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer.
If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints.
Compatible with the MakerBot Replicator 2, MakerBot Replicator (Fifth Generation), MakerBot Replicator Z18.
Glass Temp: 60-65 C (140-149 F)
Melting Temp: 150-160 C (302-320 F)
Nozzle Temp: 230 C (446 F)
Spool Diameter: 9 in
Spool Width: 2 in
Spool Hub Hole: 2 in
Diameter 1.75 mm
Net Weight: 2 lbs.
10. MakerBot MP06591 Filament Starter Small Pla True Color - Pack of 10
Feature
Makerbot replicator mini compatibleThis filament is designed for use with the makerbot mini 3d printer
Pack of 10Specifications
Color: Assorted Color
Size: 1.75mm
Recent Comments