Where to find gouge turning?
When you looking for gouge turning, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable gouge turning is not an easy task. In this post, we show you how to find the right gouge turning along with our top-rated reviews. Please check out our suggestions to find the best gouge turning for you.
1. Hurricane Turning Tools, Woodturning Three Piece Bowl Gouge Set, 1/4 Inches Flute, 3/8 Inches Flute, and 1/2 Inches Flute, High Speed Steel
Feature
Contains Three Separate Hurricane Bowl Gouges1/4" Bowl Gouge, (3/8" Bar Stock), 3/8" Bowl Gouge, (1/2" Bar Stock), 1/2" Bowl Gouge, (5/8" Bar Stock)
Made from High Speed Steel (HSS), Last up to 8X longer than Carbon Steel
Description
This set consists of three different Woodturning Bowl Gouges with a Superflute style shape. All bowl gouges are made from High Speed Steel. Hurricane Turning Tools are made in one of the world's largest turning tool factories. They are made out of M2 High Speed Steel for superior edge holding ability and will last 8X longer between sharpenings as compared to carbon steel. In addition to the high quality steel, Hurricane Turning Tools have extra long handles, some as long at 16 inches. The handles are made from solid Ash. These tools compare with any HSS tool on the market and are sold throughout the world. Compare these tools to others that sell for two to three times the price. Ships ready for you to sharpen.2. Hurricane Turning Tools, Woodturning Two Piece Roughing Gouge Set, 2 Inches Gouge and 1 Inches Gouge, High Speed Steel
Feature
Contains Two Separate Hurricane Roughing Gouges2" Roughing Gouge and 1" Roughing Gouge
Made from High Speed Steel (HSS), Last up to 8X longer than Carbon Steel
Description
This set consists of two separate Woodturning Roughing Gouge mades from High Speed Steel. The model numbers for the set are listed above. Hurricane Turning Tools are made in one of the world's largest turning tool factories. They are made out of M2 High Speed Steel for superior edge holding ability and will last 8X longer between sharpenings as compared to carbon steel. In addition to the high quality steel, Hurricane Turning Tools have extra long handles, some as long at 16 inches. The handles are made from solid Ash. These tools compare with any HSS tool on the market and are sold throughout the world. Compare these tools to others that sell for two to three times the price. Ships ready to be sharpened.3. Hurricane Turning Tools, Woodturning Roughing Gouge, High Speed Steel, 1 Inches Flute
Feature
1" Roughing Gouge12" Ash Handle
Made from High Speed Steel (HSS), Last up to 8X longer than Carbon Steel
Description
This is the 1" Woodturning Roughing Gouge made from High Speed Steel. Hurricane Turning Tools are made in one of the world's largest turning tool factories. They are made out of M2 High Speed Steel for superior edge holding ability and will last 8X longer between sharpenings as compared to carbon steel. In addition to the high quality steel, Hurricane Turning Tools have extra long handles, some as long at 16 inches. The handles are made from solid Ash.These tools compare with any HSS tool on the market and are sold throughout the world. Compare these tools to others that sell for two to three times the price.Ships ready for you to final sharpen.4. Hurricane Turning Tools, Woodturning Bowl Gouge, High Speed Steel, 1/2 Inches Flute (5/8 Inches Bar Stock)
Feature
1/2" Bowl Gouge, (5/8" Bar Stock)16" Ash Handle
Made from High Speed Steel (HSS), Last up to 8X longer than Carbon Steel
Description
This is the 1/2" Woodturning Bowl Gouge with a Superflute style shape made from 5/8" High Speed Steel. Hurricane Turning Tools are made in one of the world's largest turning tool factories. They are made out of M2 High Speed Steel for superior edge holding ability and will last 8X longer between sharpenings as compared to carbon steel. In addition to the high quality steel, Hurricane Turning Tools have extra long handles, some as long at 16 inches.The handles are made from solid Ash. These tools compare with any HSS tool on the market and are sold throughout the world. Compare these tools to others selling at two to three times the price. Ships ready for you to final sharpen.5. Hurricane Turning Tools, Woodturning Bowl Gouge, High Speed Steel, 3/8 Inches Flute (1/2 Inches Bar Stock)
Feature
3/8" Bowl Gouge, (1/2" Bar Stock)14" Ash Handle
Made from High Speed Steel (HSS), Last up to 8X longer than Carbon Steel
Description
This is the 3/8 " Woodturning Bowl Gouge with a Superflute style shape made from 1/2" High Speed Steel. Hurricane Turning Tools are made in one of the world's largest turning tool factories. They are made out of M2 High Speed Steel for superior edge holding ability and will last 8X longer between sharpenings as compared to carbon steel. In addition to the high quality steel, Hurricane Turning Tools have extra long handles, some as long at 16 inches. The handles are made from solid Ash. These tools compare with any HSS tool on the market and are sold throughout the world. Compare these tools to others selling at 2 to 3 times the price.Ships ready for you to final sharpen.6. Mikimiqi Wood Sculpture Carving Chisel Tools Set Roughing Gouge Turning Tools for Woodworking Carpentry
Feature
Package includes 3 turning tools, 3/10" Skew Chisel, 1/2" Skew Chisel and 7/10" Skew Chisel.Tools are 11-inch long and 11.8-inch long. more comfortable to hold and use.
Alloy steel of blade with hardwood handle is charming and more durable, even comfortable to hold and use.
Blade edge is sharp, please do not touch!
Suitable for amateur woodworker manual DIY gouging in woodworking.
Description
Set of 3 wood sculpture carving chisel tools are made from alloy steel that is more durable and the handle is made of hardwood which is comfortable to hold and use. Humanity design for woodworking. Turning tools set is the best ideal and economical choice for turners of all skill levels. Every handle with a ferrule is to balance for performance. The blade can be sharpened as you needed.Notice
In order to avoid breaking the chisel, please do not strike the chisel horizontally.
Please place in where children didn't touch.
After using, Please wipe clean with dry cloth and use anti-rust oil for maintenance storage.
7. Simple Woodturning Tools - Simple Shear Cutting Finisher Carbide Wood Turning Lathe Tool With 12mm Round Carbide Cutter, a Screw and star wrench, Unhandled,USA Made
Feature
The Simple Shear Cutting Finisher provides the very best surface finish possible with a carbide tipped wood turning tool.Flat topped carbide cutters can leave tear out when used on really soft wood. However, the saucer shaped carbide cutter used on this wood finisher cleanly slices the soft fibers off the vessel due to the shear cutting action, similar to conventional bowl and spindle gouges. The result is a far superior surface finish.
Tool Shaft - Solid steel 5/8" diameter beautifully nickel plated. Handle tang - " diameter x 2" length. Overall Tool Length is 12"
American made in Ramsey, Minnesota by Harrison Specialties, a family operated CNC machining and manufacturing company
Description
Simple Shear Cutting Finisher carbide turning tool. Turning wood with this carbide wood finisher is as easy as these 4 steps. 1. Position the tool rest as close to the work as possible so the carbide cutter is at the lathe center line. 2. Place the tool on the tool rest with the tool shaft parallel with the floor. 3. Rotate the tool handle about its axis (similar to twisting a motorcycle throttle) approximately 35 in the direction you will be cutting. 4. While securely holding the tool slowly plunge the carbide cutter into the work. As you begin to move the tool across the turning and your project takes shape, you will quickly discover how well these carbide tools cut and how simple it is to make beautiful turnings. The Simple Shear Cutting Finisher provides the very best surface finish possible with a carbide tipped wood turning tool. The reason for this is the saucer shaped carbide cutter. The round tool shaft allows the tool to be rotated about its axis so the cutter is presented to the work at an angle. This creates a shearing cut much like a conventional bowl or spindle gouge and leaves a superior surface finish compared to other wood turning tools that are held flat and make scraping cuts. Although this is a great benefit on all types of wood it is especially important when cutting soft wood such as spalted Maple. Flat topped carbide cutters can leave tear out when used on really soft wood. However, the saucer shaped carbide cutter used on the Simple Shear Cutting Finisher cleanly slices the soft fibers off the vessel due to the shear cutting action, similar to conventional bowl and spindle gouges. The result is a far superior surface finish. Simple Shear Cutting Finisher technical details: Carbide cutter - " diameter - saucer shaped shear cutting. Overall tool length - 12". Tool Shaft - Solid steel 5/8" diameter beautifully nickel plated. Handle tang - " diameter x 2" length.8. SKEMiDEX---8pc Wood Lathe Chisel Turning Tool set Woodworking Gouge Skew Parting Spearpoint. Great for the professional or beginner, it is perfect for carving and cutting wood
9. Tormek SVD-186 Turning Tool Sharpener Gouge and Turning Cutter Jig That Makes Repeatable, Precise Sharpening Easy
Feature
Made for Fingernail Shaped Turning GougesQuickly produce a repeatable razor edge
Can be Used for Various Lengths on the Side Bevel
Can also be used for Bent Carving Gouges and V-Tools
Maximum Width of Blade is 1-3/8 Inch
Description
Sharpening gouges, turning cutters, lathe turning tools, and similar has always presented a challenge. But no more with this turning tool sharpening jig. It's ideal for sharpening your gouges and similar to a finely-honed edge. The best part is the versatility - you can achieve the perfect shape, and make it repeatable, so you can have a consistent degree. Fingernail shaped sharpening was never so intuitive. The design of this jig allows for blades of up to 1-3/8 inch wide, and enables you to sharpen them while removing as little metal as possible. The result is sharp, precise tools that are not only a joy to work with, but will last longer as well. Included with the jig is a shaft for turning cutters, along with a special recipe label and pen that let you note settings for your tools (so you can get the same results next time.) It fits all Tormek sharpening system, and can be made to fit others as well.10. Hurricane Turning Tools, Woodturning Roughing Gouge, High Speed Steel, 2 Inches Flute
Feature
2" Roughing Gouge16" Ash Handle
Made from High Speed Steel (HSS), Last up to 8X longer than Carbon Steel
Recent Comments