Where to find stud finder by classware?
When you looking for stud finder by classware, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable stud finder by classware is not an easy task. In this post, we show you how to find the right stud finder by classware along with our top-rated reviews. Please check out our suggestions to find the best stud finder by classware for you.
1. Stud Finder Wall Scanner - 3 in 1 Electric Multi Function Wall Detector Finders with Digital LCD Display, Center Finding Stud Sensor & Sound Warning for Studs/Wood/Metal/Live AC Wires Detection
Feature
FOUR SCANNING MODES - The stud finder provides four scanning modes in total for detection. Depending on the tasks you have, you can switch to the desired mode. The STUD SCAN is used for finding and locating the center and edges of wood or metal studs up to 3/4 in (19mm) deep; DEEP MODE for scanning walls for 1 1/(2 ) in (38mm) deep; METAL SCAN for locating and detecting metal (such as 1/2 inch rebar) up to 2 1/(4 )in (60mm) deep; and AC SCAN for locating live AC wires up to 2 in (51mm) deepGRAPHICAL LCD DISPLAY - The multi Function wall scanner detector has a GRAPHICAL LCD DISPLAY, which indicates many cues in detection, such as detection mode, signal strength, automatic calibration, battery indication with maximum readability. And the Low Battery Indicator icon displays when the battery level is getting low, reminding you to replace a brand new 9-volt battery in time
SOUND WARNING - The multi function stud finder offers the BEEP SIGNAL ALERT. When you have detected an object with the wall scanner, it will beep continually. The big sound warning together with the LCD screen helps detect the accurate location of the objects. Then a peck shape will display on the graphical screen. You can use the pencil to point the location of the object. The audible and visible cues reliably keep users informed when any object, such as metal, studs, AC live wiring gets found
AUTOMATIC CALIBRATION - The wall dectector stud finder would AUTOMATICALLY CALIBRATE ITSELF when it is turned on. The calibration is done by positioning the device on the wall where there is no wood studs, AC wires or metal. The stud finder will indicate whether it has been already calibrated or not. The automatic calibration is accurate and precise, providing users with maximum reliability, greatly reducing errors in application and makes sure that most objects behind the wall can be detected
SIMPLE AND FAST - The stud finder wall scanner can QUICKLY LOCATE the edges and center of metal studs, pipes, rebar, joists behind walls, floors and ceilings as well as the live AC wires. Fast detection saves users time and efforts, making the task completion EASIER. One button on the middle of body is used for selecting from four scanning modes. The other button is on the left side of device, which helps you easily read the information on LCD screen and quickly detect the objects behind walls
Description
The multi-scanner stud finder is an extremely ideal tool for construction, electricians, masons, carpenters, homeowners, and others who need reliable detection.The stud finder wall scanner has four scanning modes in total : Stud Scan, Deep Mode, Metal Scan and AC Scan, which offers you wide choices to select your desired mode when it comes to various tasks. Due to the multi-mode detection and portability, the users can apply the stud finder wall detector to wide use. You can work on different wall surfaces, such as lath, wallpaper, wood flooring, acoustic ceiling, painted walls and more.
The greatest advantage of VIVREAL multi-scanner stud finder lies in its fast and simple detection. After selecting your desired mode, simply press the button on the left side of stud finder wall detector, you can quickly and accurately identify the wood and metal studs, copper and steel pipe, rebar, or wiring hidden behind the walls. It really saves you quantities of time and makes your detection experience more interesting and productive.
In addition, VIVREAL wall scanner detector also gives you many audible and visible cues when any objects detected, which helps you to find the exact location of variety of materials. The bright graphical LED display shows the Read-Outs of detection mode, signal strength, automatic calibration, battery indication with maximum readability. These smart features all make the stud finder wall scanner compact and durable.
USER TIPS:
1. Hold the stud finder properly and move it slowly in one direction to obtain the optimum scanning results.
2. Avoid placing your other hand, or any other part of your body on the surface being scanned, which will interfere with the performance of the scanner
3. Make sure that the surfaces you scan are flat and have been fully dried out.
4. Take care when working near the electrical wires and always turn off the power supply.
2. Stud Finder By Classware | Wireless Metal Detector And AC Live Wire Multi-Scanner | Multifunctional Wall Scanning Device With LCD Screen | High Precision, Long-Lasting And Lightweight Design
Feature
SCAN YOUR HOUSE WALLS WITH EASE: Do you want to find all of the wires and studs that are hidden behind the walls of your house? Don't call a professional electrician and waste a fortune! You can now do this yourself with the help of the Classware stud finder. This multi-scanner can detect studs, ceiling joints, hot AC wires and other metals with very high precision. The procedure is easy, fast and even fun! Try it out and see for yourself!YOU DON'T HAVE TO BE A PROFESSIONAL: This small scanning device may be technologically advanced, however, it is very easy to use. Once the stud finder detects a metal, it will emit a beeping sound to notify you. At the same time, the stud material detected will be displayed on the high definition LCD screen. The metal detector has been tested multiple times, so you can be 100% sure that it works. For your convenience, Classware has added a detailed instruction manual to the package.
POWERFUL AND LONG LASTING BATTERY: Nobody likes tugging and tangled wires. That's why this wireless metal detector is the best choice! You are only going to need a 9V battery (sold separately) in order to activate the stud finder. Classware has made sure that this metal detecting device does not consume too much energy, so you will not have to replace the powerful battery often. So start scanning the walls and ceiling of your house and don't worry about the battery.
PRACTICAL SIZE AND SMART DESIGN: In order to scan your walls and ceilings with the handheld stud finder, you need to hold and move your arm for a long time. Here at Calssware we wanted to make things a bit easier for you, that's why we made sure that the stud finder is very lightweight! At the same time, the metal detector is ergonomically designed, so you will have the most comfortable and secure grip, without straining your hand and arm.
YOUR SATISFACTION IS GUARANTEED: Classware has designed the most practical and the best working stud finder. In fact, we're so confident about our metal detector that we have backed it up with a 30-day satisfaction guarantee.
Description
No Metal Can Hide From The Classware Stud Finder!
Do you want to find all the metals that hide behind the walls and ceilings of your house? Then get the Classware stud finder and start scanning!
Once the metal detector finds a stud, a ceiling joint, an AC wire or any other metal, it will emit a beeping sound to let you know!
At the same time, you will be able to see the metal found on the easy-to-read, high definition LCD screen. That was an easy procedure, wasn't it?
However, if you still have trouble using the stud finder, take a look at our comprehensive instruction manual that is included in the package.
A Professional Tool For Professionals And Non-Professionals!
The Classware metal detector is a technologically advanced multi-scanner that is made for professionals, however, anyone can use it with ease.
The metal detecting device is wireless and portable, and it needs a 9V battery in order to work. Really, that's all you need!
Classware Wants To Make Your Life Easier!
For this reason, our stud finder has an ergonomic design, so that you will have the most comfortable grip while scanning for metals.
In addition, the metal detector is also very lightweight, so it won't be a burden to carry around in your tool bag or belt.
And since it is so light, it will not tire your arm while you will be holding it up and scanning your walls for hours.
Detect Metals With Ease Or Your Money Back!
Here at Classware we're very confident about the efficacy, quality and practicality of the professional stud finder.
We want you to trust us and have zero doubts when making this purchase. That's why we offer you a satisfaction guarantee.
So if during the first 30 days you're not satisfied with the metal detector, we will give you your money back.
Don't Hold Back Any Longer! Click The "Add to Cart" Button NOW!
3. Bosch Digital Multi-Scanner GMS120
Feature
DETECTION: The Bosch GMS120 Digital Wall Scanner features multi-mode laser detection for wood studs, metal objects (rebar, studs and steel/copper pipes) and live wiring.PERFORMANCE: Features the latest three sensor laser technology, offering a wide range of detection performance of up to 4-3/4-Inch deep in cured concrete, up to 2 inches for live wiring, up to 3-1/8 inches for copper and up to 1-1/2 inches for wood studs. The accuracy of the product is 0.0625
SELF-CALIBRATING: Includes three selection modes for wood, metal, and AC wiring. The GMS120 offers automatic calibration from the start and continues to self-calibrate through the course of the project for easy and precise detection
DISPLAY: Features an illuminated graphical LCD display to indicate mode, detection strength, and more. The large detection ring flashes green for no object found, orange for object near and red for object found within the sensor range.
CENTER FINDER: This wall scanner includes a center finder that pinpoints the object center with an audible detection signal with an on/off button.
Description
Know what's behind the wall before you take on that job with a wall scanner! The Bosch GMS 120 Electronic Multi Scanner finds magnetic and nonmagnetic metals, power cables, wooden substructures and even plastic pipes! An audible alert and illuminated graphical display gives you the information you need to proceed with confidence.4. Zircon MultiScanner i520-FFP Center Finding Stud Finder with Metal and Live AC Wire Detection
Feature
Zircon's MS i520 is a multi-surface scanner with 4 modes that detect studs, metal and live AC wiring to help you easily find studs and avoid hazardsBoth StudScan and DeepScan modes locate the edges, center and direction of wood or metal studs; Metal Scan mode finds both non-ferrous metal (such as copper pipe) and ferrous metal (such as rebar); AC Scan finds and traces live, unshielded electrical AC wires
WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan, DeepScan, and Metal Scan modes
ACT (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud, while the Patented SpotLite Pointing System clearly indicates the target location
One fully charged 9V battery, not included, is required for the multi-surface scanner to run at optimal performance
Description
The Zircon MultiScanner i520 center finding electronic wall scanner quickly and easily locates studs, detects metal, locates live, unshielded AC wires. Complete with the latest technology in density detecting software and circuitry, as well as an ergonomic body design. Unlike other wall scanners and stud finders, the Zircon i520 stud finder has a 4-mode switch makes it easy to change functions while the ultra-bright LCD screen, SpotLite Pointing System, and audio tone all indicate the location of the target. This Zircon stud finder also comes equipped with a Signal Strength Indicator helps to distinguish between shallow and deep targets. A weak signal can also imply other non-stud objects, like wires and pipes, are present in the area being scanned. The MultiScanner i520 includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its battery for optimal performance results. The tool constantly scans its surroundings and recalibrates itself if necessary. In StudScan mode, the Zircon i520 locates the center, edges, and direction of wood or metal studs up to 3/4 (19 mm) of an inch deep. Switch the i520 stud finder over to DeepScan mode and double the scanning depth to 1.5 inches (38 mm) deep and enables scanning for joists in some ceilings and floors. Metal Scan mode of the MS i520 provides the ability to locate non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Using Metal Scan mode, this Zircon studsensor can find studs behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. Additionally, the MultiScanner i520 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using the stud and metal scan modes. To detect, locate, map, and trace the live wires, simply switch over to the AC Scan function which acts as a live wire detector and finds and traces live, unshielded AC wiring up to 2 inches (50 mm) deep. The Zircon MultiScanner i520 is a perfect choice for serious users, such as home improvement hobbyists and professional contractors. With the Zircon MS i520, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.5. Zircon StudSensor e50 Electronic Wall Scanner / Edge Finding Stud Finder / Live AC WireWarning Detection - FFP
Feature
The Zircon SS e50 electronic stud scanner detects the edges of wood and metal studs and alerts you of live AC wires helping you easily find studs and avoid hazards while mounting a TV, hanging cabinets, installing garage shelving and moreStudScan mode locates the edges of wood or metal studs up to 0.75 inches (19 mm) deep while DeepScan mode locates targets up to 1.5 inches (38 mm) deep
WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes
Patented "Over the Stud" Indicator and SpotLite Pointing System ensure the e50 provides trustworthy results while the ergonomic grip design allows for comfortable use regardless of hand size
One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance
Description
The Zircon StudSensor e50 is an electronic edge finding stud finder. The e50's body design reduces normal scanning errors and can be comfortably held in either hand at any angle while the rubber over molded grip also provides a secure hold. The SS e50 easily locates the edges of wood and metal studs and joists behind walls, floors, and in ceilings with just one pass. In StudScan mode, the SSe50 locates the edges of shallower wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using both stud scan modes. Finding studs using this edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The easy-to-read LCD will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, an arrow-shaped SpotLite Pointer will illuminate and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks. Make sure to note whether the WireWarning Detection is alerting to live, unshielded AC wiring before drilling between the two marks into the center of the stud. With the Zircon StudSensor e50, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.6. Zircon StudSensor 70 Center Finding Stud Finder with Live AC WireWarning Detection and Built-In Erasable Wall Marker
Feature
The Zircon SS 70 electronic stud scanner detects the edges and center of wood and metal studs and alerts you of live AC wires helping you easily find studs and avoid hazardsStudScan mode locates the edges of wood or metal studs up to 0.75 inches (19 mm) deep; DeepScan mode locates targets up to 1.5 inches (38 mm) deep; WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes
ACT (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud, in both StudScan and DeepScan modes
"Ready" LED lights to indicate when the stud finder is calibrated and ready for use while the patented SpotLite Pointing System illuminates and the audio tone signal sounds when the stud center is located
Integrated erasable wall marker enables users to mark targets with the simple push of a button
Description
The Zircon StudSensor 70 center finding electronic wall scanner comes loaded with the latest technology in density detecting software and circuitry. Using the patented CenterVision technology, the SS 70 easily locates the center and edges of wood and metal studs and joists behind walls, floors, and in ceilings with just one pass. The specialized SpotLite Pointing System and an audio tone indicate the location of the target. In StudScan mode, the SS70 locates the center and edges of shallower wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode by quickly pressing the Power Button twice to double the scanning depth to 1.5 inches (38 mm). The StudSensor 70 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using both stud scan modes. The SS 70 also comes equipped with a built-in erasable marker enabling you to mark the hazards or studs with the simple push of a button. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and calibrate it. Once you hear the calibration beep and see the Ready LED light, continue to hold the Power Button and slowly slide the tool across the surface. As the stud detector approaches the edge of a stud, the red LEDs progressively light from the bottom up in both scanning modes. The top lighted Center LED, SpotLite Pointing System, and audio tone all indicate when the studs center is found. Make sure to note whether the WireWarning Detection is alerting to live, unshielded AC wiring before drilling between the two marks into the center of the stud. Now delivered to you in our Amazon exclusive easy to open packaging with no clam shells and no twist ties, the SS 70 is ready for use just seconds after you receive it. With the Zircon StudSensor 70, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.7. Zircon MultiScanner 740 Electronic Wall Scanner with Built-In Erasable Wall Marker/Center Finding and Edge Finding Stud Finder/Metal Detector/Live AC Wire Detection - FFP
Feature
Zircon's MS 740 is a multi-surface scanner with 4 modes that allows you to detect and mark the location of studs, metal and live AC wiringACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to the unique floating head design that keeps the sensor flat on rough and textured surfaces to increase the accuracy of results
Both StudScan and DeepScan modes locate the edges, center and direction of wood or metal studs and joists; Metal Scan mode finds both non-ferrous metal (such as copper pipe) and ferrous metal (such as rebar) even through lath and plaster; AC Scan finds and traces live, unshielded electrical AC wires
WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan, DeepScan, and Metal Scan modes
Integrated erasable wall marker enables users to mark targets with the simple push of a button
Description
The Zircon MultiScanner 740 center finding electronic wall scanner quickly and easily locates studs, detects metal, locates live, unshielded AC wires and allows you to mark your target. Complete with the latest technology in density detecting software and circuitry, an ergonomic body design, and an erasable marking system. Unlike other wall sensors, scanners and stud finders, the MS 740 is uniquely designed with a "floating head" that keeps the scanning surface level on textured or rough surfaces so results are more accurate. The 4-mode switch makes it easy to change functions while the ultra-bright display screen, dual SpotLite Pointing System, and audio tone all indicate the location of the target. The Signal Strength Indicator helps to distinguish between shallow and deep targets. The MultiScanner 740 also includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its battery for optimal performance results. In StudScan mode, the multifunctional 740 locates the center, edges, and direction of wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode and double the scanning depth to 1.5 inches (38 mm). Metal Scan mode of the MS740 provides the ability to locate non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Using Metal Scan mode, studs can be found behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. Additionally, the MS 740 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using the stud and metal scan modes. To detect, locate, map, and trace the live wires, simply switch over to the AC Scan function which finds and traces live, unshielded AC wiring up to 2 inches (50 mm) deep. Then use the integrated, erasable marker to note the progression of the wires, studs, or other objects behind the walls. With the Zircon MS740, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.8. Stud Finder, Multi-Function Wall Stud Sensor Detector Scanner with LCD Display for Metal, AC Live Wire, Wood Finder with Warning Detection
Feature
Wonderful Stud Finder & Scanner --- Taking on a home improvement project can be a tough task, especially when you have to start working with the walls and need to drill holes or nail into them. To make all of your DIY home projects easier, think about the iDER Stud Sensor, as it is built to be easy to use and is powerful enough to make virtually any home task simple and straightforward.Deep Penetration Sensors --- The real benefit of this stud finder is its amazing deep scanning sensors, which are designed to penetrate thick walls more easily. Detects stud up to 1.25 inches (38mm), metal up to 3 inches (76mm), presence of live wire up to 3 inches (76mm).
Easy to Read LCD Screen --- Like many electronic stud finders, this model has an LCD screen that helps you understand what the device is doing while you use it, but thankfully the people over at Sharkk put a lot of effort into making that display very simple and very easy to read.
User Friendly Features --- There are a lot of great features on this stud finder that really make it an invaluable tool for any type of DIY renovation project. If you're just trying to hang a few pictures, you can use the center detection feature to help you locate the strongest point on a stud so that you can drive in your nail and trust that there's more holding it in place than just the drywall.
Warranty --- Provide 24 months product warranty, 24/7 technical support and friendly customer service.
Description
What Is iDER Stud Sensor Used For?There are certain tools that everyone must have in their tool boxes, and one of these tools is one that will help you to easily locate studs in your walls. You can use these tools instead of having to feel your way around or tap the walls until you find the solid spot. You will have much more accurate results when you are using the right tool for the job, and when it comes to something as important as finding studs in your walls, you really do want to have a tool that has been made specifically for that purpose.
Ergonomic Design
While you're probably not going to be using this stud finder for hours on end, there's still a huge benefit to having it feature an ergonomic design. First of all, being able to hold a tool in your hand comfortably and without difficulty makes it easier to use. In terms of a stud finder, easy to use means you're going to get more accurate results and that you' re less likely to experience read errors. You always need to keep the unit close to the wall and move it in a smooth fashion, and when the device is hard to grasp and hold onto you're more likely to accidentally pick it up during a pass and disrupt its scan.
Multifunction wall Scanner TH210 features
Stud mode: detect metal studs with 1/2 inch, 1 inch and 3/2 inches mode
Metal mode: detect metal pipes, rebars etc up to 3 inches
AC mode: detect unshielded AC live wire up to 3 inches
Package Included
1 * Wall Detector
1 * User Manual
1 * 9V 6F22 Battery
9. Stud Finder Wall Detector - EONLION Goldpar Electric Multi Function Wall Scanner Finders with Digital LCD Display, Center Finding Stud Sensor, Metal Stud & Live AC Wire & Wood Scanner Detection
Feature
Multi-mode Detection: The stud finder is used for finding and locating the center and edges of wood or metal studs up to 1 1/(2 ) in (38mm) deep, while AC live wire up to 2 in (51mm) deep.Graphical LCD Display: The multi function wall scanner detector has an illuminated graphical LCD screen, which indicates detection mode, signal strength, automatic calibration and battery indication.Please replace a brand new 9-volt battery when the Low Battery Indicator icon displays.
Make Your Life Easy: This Classware stud finder will save your time and efforts, making the task completion EASIER. This multi-scanner can detect the edges and center of metal studs behind walls, floors and ceilings as well as the live AC wires. It is easy, fast and even fun to to find all of the wires and studs that are hidden behind the walls of your house without calling a professional electrician! Try it out and see for yourself!
Smart Sound Warning: The wall detector offers BEEP SIGNAL ALERT reminding you of the stud's position/location.
Ergonomic Design: Light weight, compact handheld body and anti-slip design, convenient to use as a handy household device.
Description
A Professional Tool For Professionals And Non-Professionals!
EONLION wall scanner stud finder is a technologically advanced multi-scanner that is made for construction, electricians, masons, carpenters, homeowners, and others who need reliable detection.
The wall detector uses different scanning modes to detect the center of wood and metal studs and hot unshielded AC wiring behind walls, floors, and ceilings.
For safety the product always looks for and warns users of the presence of hot AC in all modes.
The metal detecting device is wireless and portable, and it needs a 9V battery(excluded)to work.
Important Tips
-Positioning: For proper use, always place this product flat against the surface before powering on
-Power on: Press and hold the Scan button continuously while in use
-Calibration: Place it flat on wall first. Then press and hold the Scan button, and keep the unit still until calibration is complete(1-2 seconds). When calibration is complete, the unit will sound a short beep and the display bars will be cleared
-Operation: Keep it flat against the wall and move the unit slowly. Do not rock or lift it
-While calibrating, the device must not be placed directly over a stud, dense material such as metal, or over a wet or newly painted area, or it will not properly calibrate. If all segments of the middle LCD parts flash on and off, and intermittent beeps when the activation button is pressed, move the device to a different location, release the activation button and try to calibrate again
-Detector will not detect AC live wire from a shielded position
-Before scanning, please check the thickness of the position be detected is fit for detection
-Detection depth and edge detection can vary due to moisture content of materials, wall texture, paint, etc
Recent Comments