Which is the best pins back?
Finding your suitable pins back is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best pins back including detail information and customer reviews. Let’s find out which is your favorite one.
1. Mudder 50 Pieces Brass Butterfly Clutch Badge Insignia Clutches Pin Backs Replacement (Gold)
Feature
Material: nickel plated brassReplacement for pin clutch backs
Apply to lapel pins, tie tacks, citation bars, service bars and jewelry
Size: 10 mm in diameter
Keep a tie in place during important moments in life
Description
This is a good item to replace your missing pins.
Suitable for most pin badges.
Size: 10 mm in diameter
Package including:
50 x Pin backs replacement
1 x Metal box
Warm notice:
Small parts, please keepawayfromchildrentoavoidchoking.
2. SUBANG 40 Count Pin Backs Locking Bulk Metal Pin Keepers Locking Clasp With Storage Case
Feature
Spring Loaded fastener for easier on-off action without need a toolPackage: 40 Pieces pin keeper lock with 1 storage case. Keep your lock pins safe
Size: 1 cm in diameter, 0.6 cm in height
Material: nickel-plated copper
Great for pins,name tags.etc
Description
Feature:
This listing is for 40 PCS Low Profile Locking Pin backs/Pin Keepers-Highest Quality, Best Available; Suitable for all pin post pins, especially for disney pins, harley pins;
Great alternative to those standard butterfly clutches and the rubber backs; These pin backs are very easy to use; No Tools Required; Just push on the pin back to the pin nail and it is locked; the harder you pull the pin, the tighter it will lock; pull the spring loaded botton at the rear, then the pin will be released ! Low Profile, smooth surface, No finger stabbing, No pin post protruding any more!
Specification:
Material:Material: nickel-plated copper
Product Size: circumference approx 15cm/5.9 inch(unstretched);
Product weight:0.04 ounces*40
Package size:3.22*2.36*0.59inches
Package weight: 2.41 ounces
Package includes:
- 40* Locking pin keepers backs
- 1* Storage case
3. Mudder 100 Pieces Silver Tone Pin Back Clasp Brooch Name Badge Craft (1 inch)
Feature
Great for jewelry crafting, sewing fabric, making corsageColor: silver
3 Holes for sewing on or glue on
Size: approximately 25 x 5 mm (1 x 3/ 16 inches)
Package includes 100 pieces of pin backs
Description
Pin backs can be glued onto any surface to DIY crafts.
Good for making pins, name badges and similar craft items.
Size: approximately 25 x 5 mm (1 x 3/ 16 inches)
Material: stainless steel plated
Package including:
100 * 1 inch Pin backs
4. Shapenty Butterfly Clutch PVC Rubber Pin Backs Keepers Replacement Uniform Badge Comfort Fit Tie Tack Lapel Pin Backing Holder Clasp (Black, 30PCS)
Feature
Material: PVC Rubber; Color: Black.Size: 10mm in diameter, 7mm in height.
Use for lapel pins, tie tacks, citation bars, service bars and jewelry.
Great replacement for pin clutch backs.
Good for jewelry making and DIY craft projects.
Description
Shapenty pins back is well made, it is small but a great tool to replacement for pin clutch backs.5. 120 Pairs Butterfly Clutch Tie Tacks Pin Back Replacement with 8mm Length Blank Pins for Craft Making, Silver
Feature
No tools required: Butterfly clutch with spring fastener slices allow you to install and remove it easily, handy and convenient for use.Tie tacks: Clutch backs size is 11 mm in diameterpins size is 4.5 mm in diameter, 8 mm in length , with silver color, small and low profile.
Versatile: Blank pins and clutch back can be applied to make tie tacks, badge insignia, citation bars, service bars and jewelry making, etc.
Sturdy and durable: Clutch backs and blank pins are made of nickel plated brass, sturdy and light, lock pins firmly and keep them .secure
Good for keep tie in place, make some DIY crafts.
Description
Specifications:
Pin flat head diameter: 4.5 mm
Pin length: 8 mm
Pin backs diameter: 11 mm
Pin backs height: 5 mm
Material: nickel-plated brass
Package weight: 2.7ounces
Color: silver
Package includes:
120 x Clutch pin backs
120 x Blank pins
6. eBoot PVC Rubber Pin Backs, Black (100)
Feature
Size: 12 mm in diameter, 7 mm in heightMaterial: PVC rubber
Fits for all lapel pins, tie tacks, citation bars, service bars and jewelry
Replacement for pin clutch backs
Good for jewelry making and DIY fun; The rubber pin backs are only compatible with the pin 1-1.2 mm in thickness, it can't fasten if the pin is too slim
Description
Size: 12 mm in diameter, 7 mm in height
This is a good item to replace your missing pins.
Suitable for most pin badges.
It is sometimes preferred over metal backs due to its easier gripping and durability
Package including:
100 x Rubber pin backs
The rubber pin backs are only compatible with the pin 1-1.2 mm in thickness, it can't fasten if the pin is too slim.
7. ThreeBulls 30 Pcs Silver Comfort Fit Butterfly Clutch Metal Pin Backs Replacement (Silver)
Feature
ThreeBulls:100% brand new and high qualityThreeBulls:30pcs Silver Tone Butterfly clasps, ideal for badges, tie, hat and variousfixings
ThreeBulls:Great replacement for lost backs badges, name tags etc..
ThreeBulls:Size: Approx:11mm( 3/8") Dia. Hole size: 1.4mm Thickness: 5.3mm( 2/8")
ThreeBulls customized product
Description
Sexy Sparkles 30 Tie Tac Lapel Pin Squeeze Clutch Back Backings For Brooches Pins Round Silver Tone8. 100 Pairs Butterfly Clutch, CBTONE Silver Metal Tie Tacks Pin Backs Replacement with Blank Pins for Craft Making, Badge Insignia, Citation Bars, Service Bars, Toy Pins and Jewelry Making
Feature
Durable & Secure - Tie tacks is made of nickel plated brass. Metal material makes it anti-wear. And these are incredibly sturdy and secure.Replaceable - The package including 100 pairs tie tacks, enough for replacement to your torn or lost one, also good supplies for making DIY crafts.
Size - The blank pins size is 4.0 mm in diameter, 8 mm in length; Clutch backs size is 11 mm in diameter. The gap between them is very small and tight clasp
Easy to use - No tools required, the Butterfly clutch with spring fastener slices allow you to install and remove it easily. Great for pins keeps a tight hold on them.
Widely used - The blank pins and clutch back can be applied to tie tacks, badge insignia, citation bars, service bars, name tag, toy pins, jewelry making, DIY crafts, etc.
Description
100 pairs butterfly clutch pin back replacement with blank pins tie tacks Low profile and durable:
Clutch backs and blank pins are made of brass, sturdy and small, unnoticeable while lock pins firmly and keep them secure.
No tools required:
Pin backs with spring fastener slice allows you to install and remove it easily, handy and convenient for use.
Abundant amount:
100 Set of tie tacks, enough for replacement to your torn or lost one, also good supplies for making DIY crafts. Can be applied to tie tacks, badge insignia, citation bars, service bars and jewelry making, etc.
Specifications:
Pin flat head diameter: 4.0 mm
Pin length: 8 mm
Pin backs diameter: 11 mm
Pin backs height: 5 mm
Material: brass
Color: silver
Package includes:
100 x Clutch pin backs
100 x Blank pins
9. eBoot 65 Pieces 3 Styles Clutch Pin Backs with 20 Pieces Tie Tacks Blank Pins
Feature
Color: golden, silver, blackPin diameter: 10 mm, pin backs diameter: approx. 11mm
Easy to use, no tools required
Apply to lapel pins, tie tacks, service bars and jewelry
Good replacement for lost backs badges, name tags, etc.
Description
Features:
Apply to display books, lanyards, bags, vests and hats.
Pin diameter: 10 mm, pin backs diameter: approx. 11mm
Good for pins, name tags, etc.
Package includes:
Silver locking pin keepers: 10 pieces
Golden locking pin keepers: 10 pieces
Silver clutch pin backs: 15 pieces
Golden clutch pin backs: 15 pieces
Black PVC pin backs: 15 pieces
Silver blank pins: 20 pieces
1 x Plastic transparent box
10. canomo 50 Pairs Butterfly Clutch Tie Tacks Pin Backs with 10mm Blank Pins(Silver and Gold)
Feature
Material: made of nickel plated brass, durable and sturdyEasy to install and remove for its flexible spring fastener slices
Pins size: 10 mm in diameter; 10 mm in length
Clutch backs size: 10 mm in diameter
Good supplies for making DIY crafts and can be applied to tie tacks, badge insignia, citation bars, service bars and jewelry making
Description
Features:
Material: nickel plated brass
Color: silver and gold
Pins size: 10 mm in diameter; 10 mm in length
Clutch backs size: 10 mm in diameter
Package includes:
25 Pieces silver clutch pin backs
25 Pieces silver blank pins
25 Pieces gold clutch pin backs
25 Pieces gold blank pins
Recent Comments