banjo valve buyer’s guide
We spent many hours on research to finding banjo valve, reading product features, product specifications for this guide. For those of you who wish to the best banjo valve, you should not miss this article. banjo valve coming in a variety of types but also different price range. The following is the top 10 banjo valve by our suggestions:
1. Banjo EV204FP Polypropylene Electronic Actuated Ball Valve, 12VDC, Full Port, 2" NPT Female
Feature
Polypropylene with a 316 stainless steel ball and stem for strength and resistance to chemicals and corrosion12V DC electronic actuator for remote on/off control in automated applications
Full port flow for higher operating efficiency than standard port
Inline valve for connecting two pipes going in the same direction
Female NPT threads for connecting to male threaded pipe fittings
Description
>This Banjo EV204FP ball valve is made of polypropylene with a 316 stainless steel ball and stem for strength and resistance to chemicals and corrosion. This valve has a full port flow with a 12V DC electronic actuator for remote on/off control in automated applications. This inline valve has 2" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in the same direction. It has PTFE (polytetrafluoroethylene) seats for resistance to chemicals, moisture and high temperatures and is rated to 150 pounds per square inch (psi) with a maximum operating temperature of 70 degrees F. This full port ball valve is suitable for use in fluid handling applications.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the balls position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.
Banjo manufactures valves, couplings, pumps, pipe and hose fittings, and other fluid handling products for industrial applications. The company, founded in 1995, is headquartered in Crawfordsville, IN.
2. Banjo V200 Polypropylene Ball Valve, Three Piece, Standard Port, 2" NPT Female
Feature
Polypropylene for chemical resistance and less weight than if made from metalLever handle for on/off manual control
Standard port flow for smaller valve size
Inline valve for connecting two pipes going in the same direction
Female NPT threads for connecting to male threaded pipe fittings
Description
This Banjo V200 ball valve is made of polypropylene for chemical resistance and less weight than if made from metal and has a standard port flow for a smaller valve size. This three-piece construction inline valve has a lever handle for manual on/off control and 2" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in the same direction. It has PTFE (polytetrafluoroethylene) seats for resistance to chemicals, moisture, and high temperatures and is rated to 150 pounds per square inch (psi) with a maximum operating temperature of 150 degrees F. This full port ball valve is suitable for use in fluid handling applications.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the balls position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.
Banjo manufactures valves, couplings, pumps, pipe and hose fittings, and other fluid handling products for industrial applications. The company, founded in 1995, is headquartered in Crawfordsville, IN.
3. Banjo V200FP Polypropylene Ball Valve, Three Piece, Full Port, 2" NPT Female
Feature
FKM (Viton type) sealsPTFE self-lubricating stem Bushings and seats cannot stick or bind
Precision molded in polypropylene
Polypropylene is reinforced with fiberglass for additional strength
Self-aligning ball moves freely against the PTFE seats for smooth operation
Description
Banjo V200FP 2" Full Port Valve, 6 Bolt, FNPT x FNPT4. Banjo V100FP Polypropylene Ball Valve, Three Piece, Full Port, 1" NPT Female
Feature
FKM (Viton type) sealsPrecision molded polypropylene is reinforced with fiberglass for additional strength
Self-aligning ball moves freely against the PTFE seats for smooth operation The valve opens and closes with very little pressure on the handle
Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats
PTFE self-lubricating stem Bushings and seats cannot stick or bind
Description
Banjo V100FP 1" Full Port Valve, FNPT x FNPT5. Banjo V150 Polypropylene Ball Valve, Three Piece, Standard Port, 1-1/2" NPT Female
Feature
FKM (Viton type) sealsPrecision molded polypropylene is reinforced with fiberglass for additional strength
Self-aligning ball moves freely against the PTFE seats for smooth operation The valve opens and closes with very little pressure on the handle
Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats
PTFE self-lubricating stem Bushings and seats cannot stick or bind
Description
Banjo V150 1 1/2" Full Port Valve, FNPT x FNPT6. Banjo V300FP Polypropylene Ball Valve, Three Piece, Full Port, 3" NPT Female
Feature
Full port ball valve for reduced friction and better flowMade of fiberglass-reinforced polypropylene for strength and resistance to chemicals
PTFE seats for resistance to chemicals, moisture, and high temperatures
Female NPT threads for connecting to male threaded pipes
Maximum working pressure of 100 psi and maximum temperature of 150 degrees F
Description
The Banjo V300FP three-piece, full port ball valve has a lever handle and NPT female threads on both ends. The body is fiberglass-reinforced polypropylene for strength and resistance to chemicals and has PTFE (polytetrafluoroethylene) seats for resistance to chemicals, moisture, and high temperatures and to reduce the risk of leakage. It has a lever handle for manual on/off control. The valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the connecting pipe for maximum operating efficiency. This valve has 3" female National Pipe Taper (NPT) threads for connecting to male threaded pipes, creating a tighter seal than straight threads. The maximum pressure rating is 100 pounds per square inch (psi), and the maximum temperature rating is 150 degrees F.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball's position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.
Banjo manufactures valves, couplings, pumps, pipe and hose fittings, and other fluid handling products for industrial applications. The company, founded in 1995, is headquartered in Crawfordsville, IN.
7. Banjo V075SL Polypropylene Side Load Ball Valve, Three Piece, Three Way, Full Port, 3/4" NPT Female
Feature
Polypropylene for chemical resistance and less weight than if made from metalSide load for valves with a side inlet
Full port flow for higher operating efficiency than standard port
Three-port diverting valve to regulate flow among three sections of pipe
Female NPT threads for connecting to male threaded pipe fittings
Description
This Banjo V075SL side load ball valve is made of polypropylene for chemical resistance and less weight than if made from metal and has a full port flow with a three-port diverting valve to regulate flow among three sections of pipe. The three-piece construction side load valve has a side inlet (cannot be completely turned off) and 3/4" female National Pipe Taper (NPT) threads for connecting to male threaded pipe fittings. It has PTFE (polytetrafluoroethylene) seats for resistance to chemicals, moisture, and high temperatures and is rated to 100 pounds per square inch (psi) with an operating temperature range of -20 to 150 degrees F. This three way ball valve is suitable for use in fluid handling applications.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the balls position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.
Banjo manufactures valves, couplings, pumps, pipe and hose fittings, and other fluid handling products for industrial applications. The company, founded in 1995, is headquartered in Crawfordsville, IN.
8. Banjo VSMT200 2" Stubby Valve, Male NPT x Female NPT
Feature
Stainless steel boltsGlass filled polypropylene
Multiple design options
Unique patented compact design
Lightweight
Description
Banjo VSMT200 2" Stubby Valve, Male NPT x Female NPT9. Banjo SUV150FP Polypropylene Ball Valve, Single Union, Full Port, 1-1/2" NPT Female
Feature
Price For: Each Handle Material: Polypropylene Valve Basic Body Material: Plastic Ball Valve Product Group: Manual Body Material: Polypropylene Stem Material: Polypropylene Item: Ball Valve Ball Material: Polypropylene Handle Type: Lever Port: Full Max. Pressure: 100 psi CWP Pipe Size: 1-1/2" Body Style: 2-Way Temp. Range: -20 Degrees to 150 Degrees FBody Seal Material: PTFE/FKM Valve Structure: 3-Piece Connection Type: FNPT x FNPT Seat Material: PTFE Country of Origin (subject to change): United States
Description
'Ball Valve, Body Material Polypropylene, Body Style 2-Way , 3-Piece, Pipe Size 1-1/2 In., Connection Type FNPT x FNPT, Full Port, Max. Pressure 100 psi CWP, Temp. Range -20 Degrees to 150 Degrees F, Ball Material Polypropylene, Seat Material PTFE, Handle Type Lever, Handle Material Polypropylene, Stem Material Polypropylene, Body Seal Material PTFE/FKM'10. Banjo V100SL Polypropylene Side Load Ball Valve, Three Piece, Three Way, Full Port, 1" NPT Female
Feature
Polypropylene for chemical resistance and less weight than if made from metalSide load for valves with a side inlet
Full port flow for higher operating efficiency than standard port
Three-port diverting valve to regulate flow among three sections of pipe
Female NPT threads for connecting to male threaded pipe fittings
Description
This Banjo V100SL side load ball valve is made of polypropylene for chemical resistance and less weight than if made from metal and has a full port flow with a three-port diverting valve to regulate flow among three sections of pipe. The three-piece construction side load valve has a side inlet (cannot be completely turned off) and 1" female National Pipe Taper (NPT) threads for connecting to male threaded pipe fittings. It has PTFE (polytetrafluoroethylene) seats for resistance to chemicals, moisture, and high temperatures and is rated to 100 pounds per square inch (psi) with an operating temperature range of -20 to 150 degrees F. This three-way ball valve is suitable for use in fluid handling applications.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the balls position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.
Banjo manufactures valves, couplings, pumps, pipe and hose fittings, and other fluid handling products for industrial applications. The company, founded in 1995, is headquartered in Crawfordsville, IN.
Recent Comments