Best petg by ic3d
If you looking for petg by ic3d then you are right place. We are searching for the best petg by ic3d on the market and analyze these products to provide you the best choice.
1. IC3D Natural 1.75mm ABS 3D Printer Filament - 2.1lb Spool - Dimensional Accuracy +/- 0.05mm - Professional Grade 3D Printing Filament - MADE IN USA
Feature
2lb of 1.75mm ABS 3D printer filamentFilament diameter is 1.75mm +/-0.05, ovality (roundness) is within 4% and weight is 2.1lb +/- 0.1
Printing temperature range is 220 - 230C
Made in the USA under strict quality standards
Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A
Description
IC3D - For 3D Printers, By 3D Printers (TM) Spend more time printing with high-quality 3D printer filament from IC3D. IC3D extrudes 3D printer filament in-house in Ohio, USA. Strict production standards for cleanliness and tolerance specifications ensure the diameter is within +/- 0.05mm and ovality (roundness) is within 4%. Quality is the top priority as each spool is hand checked, vacuum sealed with desiccant, and packaged. IC3D filament is extensively tested with success on a variety of mainstream desktop 3D printers utilizing various extruder designs and hot-end styles. Every spool of IC3D filament is backed by a 100% SATISFACTION GUARANTEE.2. eSUN 3D 1.75mm PETG Red Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque Red
Feature
1KG net (approximately 2.2 lbs) Filament with Clear SpooleSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red, solid blue, solid gray, solid green, solid yellow, solid purple, solid gold, solid silver
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 230C - 250C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
eSUN 3D Printer Filament: PETGExtrusion Temperature Range: 230 Celsius to 250 Celsius
Plate temperature: 80~90_ or without heated
Printing speed: 30~60mm/s
Moving speed: 30~60mm/s
Advantages of PETG: PETG is an excellent material which combines the advantages of both PLA and ABS. Odorless; Little shrinkage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish;
3. eSUN 3D 3mm PETG Blue Filament 1kg (2.2lb), PETG 3D Printer Filament, Actual Diameter 2.85mm +/- 0.05mm, Semi-transparent Blue
Feature
1KG net (approximately 2.2 lbs) Filament with Clear SpooleSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red, solid blue, solid gray, solid green, solid yellow, solid purple, solid gold, solid silver
3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 230C - 250C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
This is 3mm/2.85mm filament. Please make sure your printer can support 2.85mm filament before buying this filament. This filament does not support 1.75mm 3D printers such as CR-10, FlashForge, Wanhao, MakerGear, Monoprice select and Prusa. This filament supports all 2.85mm open standard 3D printers such as Lulzbot and Ultimaker. Verify your printer before purchasing to avoid unnecessary returns.
eSUN 3D Printer Filament: PETG
Size: 3mm
Extrusion Temperature Range: 230_ to 250_
Plate temperature: 80~90_ or without heated
Printing speed: 30~60mm/s
Moving speed: 30~60mm/s
Advantages of PETG: PETG is an excellent material which combines the advantages of both PLA and ABS. Odorless; Little shrinkage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish;
4. eSUN 3D 3mm PETG Solid White Filament 1kg (2.2lb), PETG 3D Printer Filament, Actual Diameter 2.85mm +/- 0.05mm, Solid Opaque White
Feature
1KG net (approximately 2.2 lbs) Filament with Clear Spool, 2.85mm PETG, Does not work with any 1.75mm printers. Please check your printer before purchasing.eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red, solid blue, solid gray, solid green, solid yellow, solid purple, solid gold, solid silver
3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 230C - 250C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
This is 3mm/2.85mm filament. Please make sure your printer can support 2.85mm filament before buying this filament. This filament does not support 1.75mm 3D printers such as CR-10, FlashForge, Wanhao, MakerGear, Monoprice select and Prusa. This filament supports all 2.85mm open standard 3D printers such as Lulzbot and Ultimaker. Verify your printer before purchasing to avoid unnecessary returns.
eSUN 3D Printer Filament: PETG
Extrusion Temperature Range: 230_ to 250_
Plate temperature: 80~90_ or without heated
Printing speed: 30~60mm/s
Moving speed: 30~60mm/s
Advantages of PETG: PETG is an excellent material which combines the advantages of both PLA and ABS. Odorless; Little shrinkage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish;
5. eSUN 1.75mm Yellow ABS 3D Printer filament 1kg Spool (2.2lbs), Yellow
Feature
1KG net (apximately 2.2 lbs) Filament with Clear SpooleSUN ABS 3D Printer Filament Vacuumed Sealed With Desiccant
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 220C - 260C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
eSUN 3D Printer Filament: ABSExtrusion Temperature Range: 220_ to 260_
The filaments are compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm._ ABS is a tough and durable thermoplastic which can withstand high temperature.
6. eSUN 1.75mm Black ABS 3D Printer filament 1kg Spool (2.2lbs), Black
Feature
1KG net (apximately 2.2 lbs) Filament with Clear SpooleSUN ABS 3D Printer Filament Vacuumed Sealed With Desiccant
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 220C - 260C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
eSUN 3D Printer Filament: ABSExtrusion Temperature Range: 220_ to 260_
The filaments are compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm._ ABS is a tough and durable thermoplastic which can withstand high temperature.
7. eSUN 1.75mm Black ABS+ 3D Printer filament 1kg Spool (2.2lbs), Black
Feature
1KG net (apximately 2.2 lbs) Filament with Clear SpooleSUN ABS-PLUS 3D Printer Filament Vacuumed Sealed With Desiccant
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 220C - 260C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
eSUN 3D Printer Filament: ABS+Extrusion Temperature Range: 220 Celsius to 260 Celsius
Bed Temp: 100 Celsius to 110 Celsius
ABS+ Advantages:
Much less warp than ABS. Typical ABS has over 0.8% shrinkage rate. ABS+ is less than 0.4%
High rigidity.
Much better layer bonding and details.
Not fully dissolvable in acetone. For acetone post-processing applications please still use our regular ABS. our regular ABS also has less warp than other brand ABS.
Colors offered:
Black
White
Silver
Natural
Red
Orange
Yellow
Gold
Peak Green/Light Green
Gray
Blue
Light Blue
Search "eSUN ABS" to find other colors.
We have a sample pack of ABS+ on amazon too, with 15 of ABS+ colors: https://www.amazon.com/dp/B01GAMWU6I
8. eSUN 1.75mm Gray ABS 3D Printer filament 1kg Spool (2.2lbs), Gray
Feature
1KG net (apximately 2.2 lbs) Filament with Clear SpooleSUN ABS 3D Printer Filament Vacuumed Sealed With Desiccant
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 220C - 260C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
eSUN 3D Printer Filament: ABSExtrusion Temperature Range: 220_ to 260_
The filaments are compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm._ ABS is a tough and durable thermoplastic which can withstand high temperature.
Recent Comments