disk drive docking station buyer’s guide
We spent many hours on research to finding disk drive docking station, reading product features, product specifications for this guide. For those of you who wish to the best disk drive docking station, you should not miss this article. disk drive docking station coming in a variety of types but also different price range. The following is the top 10 disk drive docking station by our suggestions:
1. iDsonix Tool Free USB 3.0/2.0 to SATA 2.5/3.5 Inch Hard Drive Docking Station with 3.3 Feet USB 3.0 Cable for HDD/SSD - Black
Feature
HDD External Hard Drive Docking Station,Max Support 8TBSATAIII/II/I External Hard Drive Enclosure,Compatible with Windows,Mac Os,Linux
USB 3.0 Hard Drive Disk External Enclosure ,5Gpbs SuperSpeed Data Transfer
USB 3.0 Tool-free HDD Enclosure,Plug and Play,No Driver Needed,Back Support USB2.0/1.1 Too
USB 3.0 SATA 2.5 3.5 Inch Hard Drive Reader,CE,FCC Approved, 18 Months Warranty
Description
iDsonix SuperSpeed USB 3.0/2.0 to SATA Hard Drive Docking Station For 2.5 or 3.5in HDD/SSD Tool Free Design provides a simple, fast, and cost effective solution for data recovery, drive imaging, and testing centers, or any environment that requires fast access to uninstalled/archived drives. Power LED light indicator Shows the power and hard drive R/W status. Plug & Play Enabled, No Additional Driver and Application is needed.Instruction
1. Plug in the power cord to the Dock
2. Connect the Dock to the host computer
3. Insert the 2.5" or 3.5" SATA drive
4. Switch on power
5. The operation system will detect that hard drive has been connected
Technical Specifications
* Supports USB 1.1/2.0/3.0 and SATA I/II/III
* Supports SuperSpeed USB 3.0 data transfer rate up to 5Gbps, 10x Faster than USB2.0
* Supports any 7mm, 9.5mm, 12.5mm or 14.5mm slim 2.5 inch laptop SATA Hard Drive and Solid State Disk
* Supports Any 3.5 inch SATA Hard Drive and Solid State Disk up to 8TB
What's in the Box
- 1x iDD-U3102 Tool Free USB3.0 Hard Drive Dock
- 1x 12V2.5A Power Adapter
- 1x 3.3 Ft. USB3.0 Cable
- 1x User's Manual
- 1x Service Card Note: When you found the HDD dock couldn't work, please calm down and attention A new drive must be formatted before using. Please attach the iDsonix device, with the drive inside, to the computer. Right click on "My Computer" and select "Manage". Open "Disk management" under "Storage" folder. We can see all HDDs and SSDs here. You can right-click on them and format them. You could send a screen shot of the "Disk Management" to us for quick analysis and support after check the HDD,PC USB port or cables are all OK.
2. Inateck USB 3.0 to SATA Dual-Bay USB 3.0 Hard Drive Docking Station with Offline Clone Function fit 2.5"/3.5" HDD SSD SATA (SATA I/II/ III), Support 2x 8TB and UASP, Black (FD2002)
Feature
USB 3.0 external, SATA-III internal, Especially made for 2.5 inch and 3.5 inch SATA HDD/SSD, USB 3.0 SuperSpeed & supports UASP, even faster data transferIntegrated safeguards preventing overvoltage, leak currents, short circuits and peak voltage, interference and disturbance, guaranteed safer data transfer and access
Support 2x 8TB hard drive; Support offline clone, no drivers needed, easy installation; Completely new cloning technology, computer-independent duplicating/cloning without computer support possible
Stable and reliable DC power source: The power supply is highly efficient (12V, 3000mA), so that a stable energy supply is guaranteed; Entering sleep mode without operation in 30 minutes
Package Includes: 1x USB 3.0 & SSD HDD SATA Docking Station; 1x USB 3.0 Cable; 1x 12V/3A Power Adapter; 1x Manual
Description
HDD/SSD Off-line DuplicatorWhen cloning a hard drive, no PC is required - just plug both hard drives, press "Copy" button for several seconds until the LED will start flashing and the cloning process will begin. Progress indicator with LED: 25% - 50% - 75% - 100%.Support UASP and SATA 6Gbps Available - The UASP Transfer Protocol only can accelerate read and write speed of SSD hard diskHigh-class chipset ASM1156, enhanced with UASP Transfer Protocol,this dock lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps) with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller.
Features- Support offline clone, no drivers needed, and easy installation- Support 2x 8TB hard drive; Supports 2.5" & 3.5" SATA (SATA I/ II/ III) HDD and SSD- Equipped with USB3.0; Support SATA III (6 Gbps) and UASP for optimal performance; Backward compatible with USB 2.0 /1.1 - Compatible Systems: Windows 2000/ XP/Vista/ 7/ 8, Mac OS 9.1/10.8.4 or above- On/Off power switch; LED light indicates Power and Activity status; Entering sleep mode without operation in 30 minutes
Attention- The target disk must be larger than the source disk.- Please backup files in target hard drive before cloning. Any files in target hard drive will be overwritten when offline clone works.- Please make sure that there aren't any bad sectors on the drives in use, as to avoid data transfer errors, overheating and damage to the station.- When one drive is working in the docking station, please do not remove the other one or insert a new one until it's finished in case of data loss. Please power off the docking station before removing.
3. Hard Drive Docking Station, FIDECO USB 3.0 HDD Docking Station Dual-Bay External Hard Drive Dock with Offline Clone Function for 2.5"/3.5" SATA HDD SSD, Support TF & SD Card (2x 10TB)
Feature
Dual bay docking station offers an easy access with two 2.5 inch & 3.5 inch HDD SSD SATA I/II/III drives, support 2x 10TB hard drivesis a perfect solution for backup & processing IT data, batch processing data, formatting, file transfers, data recovery, etc.Hard Drive Offline Clone Function : The FIDECO hard drive docking can be used to clone an existing hard drive without connecting to a computer, or simply as external storage to transfer data between a hard drive and your computer. Note: The target disk must be larger than the source disk (HDD1=Source Disk; HDD2=Target Disk ).
USB 3.0 External Superspeed: Super speed USB 3.0 data file transfers (up to 5 Gbps) from your computer to back-up files and centralize storage for convenient access; Includes a USB 3.0 cable to connect to your computer; Backwards compatible with USB2.0 and 1.1, provides faster transfers up to 70% faster read speeds and 40% faster write speeds. No reboot and additional driver needed, hot-swapping, easy and quick Tool-Free installation.
Stable & Reliable DC Power Source: Highly efficient (DC 12V, 4A), stable and reliable power source guarantees a steady supply of energy; Equipped with USB 3.0 SD&TF read slot, supports maximum 2TB SDHC/SDXC, it easy and convenience transferring high-resolution images and video recordings (Not inclued USB 3.0 SD/TF Card).
Compatible and Warranty: For Windows XP / Vista / Windows 7 / Windows 8 / Windows 8.1 / Windows 10 and Mac IOS 10.4 to 10.11. We support 18 months warranty and 24h friendly customer service.
Description
Supports up to 2x10TB Drives:FIDECO USB 3.0 dual Bay Hard Drive Docking Stations Maximum Capacity of 2x 10TB, Compatible with 2.5 & 3.5 Inch SATA I / II / III Hard Drives.
Offline Clone Function:
When cloning a hard drive, make sure that the USB cable is disconnected from any computer - Simply connect both hard drives, press the 'Clone' button for 3 seconds until the LED starts to flash and the cloning process begins. Progress indicator with LED: 25% - 50% - 100%.
USB 3.0 TF/SD Slot Designed:
It offers more convenience and easily transferring high-resolution images and video recordings, support USB 3.0 TF/SD card (Not included USB 3.0 TF/SD Card).
Stable SuperSpeed:
Superspeed and stable power supply DC 12V 4A power for hard drive use steadily, up to 5 Gbps transmission rates USB 3.0.
Specification:
Name: Hard Drive Docking StationCable Length (USB 3.0 Cable/Power Adapter): 1.2m/1.5m
Material: Aluminum Alloy + ABS Plastic
Interface Type: SATA
USB Port: USB 3.0 Type A
Input Current: 0.8A
Input Voltage: 110-240V AC
Output Current: 4A
Output Voltage: 12V DC
Size: 11.3x10.3x6.95cm
Weight: 300g
Range of Application: 2.5'' /3.5'' HDD SSD SATA I II III Drives
Support Devices: PS4, Xbox, TV, Monitoring Equipment
Compatible System: For Windows XP / Vista / Windows 7 / Windows 8 / Windows 8.1 / Windows 10 and MacOS 10.4 to 10.11.
Package Included:
1x USB 3.0 FIDECO Docking Station (Not included HDD/SSD)
1x 12V 4A DC Power Adapter
1x USB 3.0 Data Cable
1x User Manual
4. WAVLINK USB 3.0 to SATA (5Gbps) Dual-Bay Hard Drive Docking Station for 2.5 inch/3.5 Inch HDD,SSD Support Offline Clone/Backup/UASP Functions [8TB2 ]-Black
Feature
Supports USB 3.0 external, SATA-III internal; Works great with 2.5 inch and 3.5 inch SATA HDD/SSD USB 3.0 super speed supports UASP for even faster data transfers.SuperSpeed USB3.0 interfaces with data transfer rates up to 5Gbps; 10 times faster than USB2.0, backward compatible with USB2.0 and 1.1
Standalone duplicating / Offline Clone operation with LED indicator offers 1:1 copies of hard disks at a rate of up to 300MB/s.
Built-in Power Control Switch; Highly efficient (12V, 3A), stable and reliable DC power source guarantees a steady supply of energy; Automatic sleep mode after 30 minutes of inactivity saves energy.
Tool-free installation on Windows Vista / 7 / 8 / 10, Mac OS X 10.2 to 10.10, Support hot-swapping and easy set up.
Description
What Does This Product Do?Wavlink Dual Bay HDD/SSD Storage Docking Station ST334U, allows you to install and access SATA drives quickly, it is a perfect solution for data recovery, drive imaging, and testing centers, or any environment requiring fast access to uninstalled/archived drives.
Hard Drive Duplicator Function
HDD A----Source HDD HDD B----Target HDD
1.Make sure there are no connection on the USB.
2.Ensure the Power Switch on the rear is in the OFF Position and plugged in properly.
2. Insert the HDD A in the rear near the power plug and insert the HDD B in the front.
3.Offline clone is from HDD A to HDD B. Make sure your Main Drive is in HDD A and slave in HDD BThe capacity of HDD B must be equal or bigger than HDD A.
4. Press and hold the offline clone button for 3 seconds, the LED indicator will light up. Then quickly press the offline clone button and the offline clone operation will start. Each LED represents 25% completion. It is only when every 25% of HDD A is offline clone to HDD B that such LED will remain constantly on. When offline clone operation is fully completed, all LEDs will constant on until the device is power off.
Features:
* Support 2x 8TB hard drive; Supports 2.5" & 3.5" SATA (SATA I/ II/ III) HDD and SSD
*Equipped with USB3.0; Support SATA III (6 Gbps) and UASP for optimal performance; Backward compatible with USB 2.0 /1.1
* On/Off power switch. LED light indicates Power and Activity status.
* Hot-swappable, plug and play, no drivers needed.
System Support:
supports Win XP/Vista/7/8/8.1/10 and MAC OS X
BackupTool: http://www.win-star.com/download/Drivers/ST_V1.9.zip
MAC 10.2 or above(mac not supports backup)
What's in the box?
1 x Dual Bay SATA HDD Docking Station
1 x 12V 3A Power Adapter
1 x USB 3.0 Cable
1 x Software CD Disk
1 x User's Manual
1 x Warranty Card
5. Salcar USB 3.0 to SATA Dual Bay USB 3.0 Hard Drive Docking Station with Offline Clone Function for 2.5 Inch & 3.5 Inch HDD SSD SATA I/II/III Support 2 x 8 TB Aluminium (Silver)
Feature
USB 3.0 external, SATA-III internal, especially made for 2.5 inch and 3.5 inch SATA HDD/SSD, Super Speed transfer rates of up to 5Gbps Support 2x 8 TB hard driveThe enclosure of the docking station is made out of noble polished aluminium, it is guaranteed that the heat created by the HDD will be easily dissipated to the outside.
Hot-swappable and PnP enabled Auto Sleep Tool free No Reboot and Additional Driver is needed. Clone progress indicator with LED: 25%, 50%, 75%, 100%
Stable and reliable DC power source: The power supply is highly efficient, so that a stable energy supply is guaranteed
Opertating System: Windows 2000/XP/Vista/7/8, Mac OS X 10.4 and higher and Linux (backward compatible with USB 2.0 /1.1)
Description
Introduction:SuperSpeed USB 3.0 SATA Hard Drive Docking Station For all 2.5inch and 3.5inch SATA I/II/III Hard Disk and Solid State Disk
Offline Clone:
When cloning a hard drive, no PC is required - just plug both hard drives, press "Copy" button for several seconds until the LED will start flashing and the cloning process will begin. Progress indicator with LED: 25% - 50% - 75% - 100%
SuperSpeed up to 5Gbps:
Equipped with USB 3.0, this docking station delivers SuperSpeed of up to 5Gbps. Transfer your data in just minutes.
Durable and Sturdy:
Made of Aluminum-alloy material, it is featured with an effective heat dissipation besides its ultra-light portability and exquisite craftsmanship
Tool-Free Installation:
Instead of complicated screws to work with, our docking station just snaps in place, holding your hard drive firmly and securely
Safety & security:
Over current and short-circuit protection, avoid damage the hard disk and protect data security.
System Support:
Windows XP/Vista/7/8/8.1/10 with the latest Service Packs Mac OS X 10.4.8 (or later) and Linux
Please Note:
The Hot Plug of SATA has a different behaviour, particularly concerning the swapping and changing of drives during operation. As Hot Plug only means that the PC doesn't have to be restarted after disk swaps, it is crucial to disconnect and switch off the docking station before removing and changing any disk drives, to avoid data loss and structural damage. Please make sure the device is powering off when you plug it out.
Package:
Docking Station x1
12V/4A US DC Power Adapter x1
USB 3.0 Cable x1
User Instruction x1
6. Unitek Y-3032 USB 3.0 to SATA I/II/III Dual Bay External Hard Drive Docking Station for 2.5/3.5" HDD SSD, Hard Drive Duplicator, Plastic, Black
Feature
Supports all 2.5''/3.5'' SATA I/SATA II/SATA III HDD SSD (up to 2 x 10TB); Plug and play, no driver needed, hot-swapping, easy and quick, easy to set up and disassembleSuper speed USB3.0 interfaces with data transfer rates up to 6Gbps,10 times faster than USB2.0, backward compatible with USB2.0 and 1.1
Supports UASP, provides faster transfers up to 70% faster read speeds and 40% faster write speeds over traditional USB 3.0; One touch backup function, LED light indicates power and clone progress
Compatible with windows XP/Vista/7/8/8.1/10 (32/64 bit), Mac OS 10.10 or higher, Linux
standalone duplicating/Offline Clone operation with LED indicator offers 1:1 copies of hard disks at a rate of up to 485 MB/s
Description
UNITEK USB 3.0 SATA Hard Drive Docking Station helps you transfer mass data, store movies, games and images. It is a perfect solution to duplicate a hard drive or swap hard drives between two 2.5" or 3.5" SATA Hard Drives. Questions.7. Cable Matters USB 3.0 Hard Drive Docking Station (USB to SATA Docking Station) with 10TB+ Drive Support for 2.5 Inch & 3.5 Inch HDD SSD - USB-C Cable Included for Thunderbolt 3 & USB-C Computer
Feature
TOOL FREE DOCKING STATION offers hot swap access to 2.5" and 3.5" external Solid State (SSD), Hard Disk (HDD) and Solid State Hybrid Drive (SSHD) SATA I/II/III drives of any capacity; AC powered hard drive dock provides stable drive performanceUSB C TO SATA DOCK is Thunderbolt 3 port compatible with the included USB-C to B cable; Back-up your data from the 2016/2017 MacBook, MacBook Pro, iMac and iMac Pro or Windows computers such as the HP Elite X2, Spectre 350, Levnovo Thinkpad 50/70, X1 Carbon, X1 Yoga and more
SUPERSPEED USB 3.0 file transfer rate (up to 5 Gbps) to back-up files and centralize storage for convenient access; Connect to an Xbox for expanded game storage; Both USB 3.0 to B and USB-C to B cables are included
WINDOWS & MAC COMPATIBLE SSD DOCK supports Windows XP/Vista/7/8/8.1/10 and Mac OS 10.4 to 10.13 and some Linux kernels; Dell companion storage for the Dell XPS XPS 12 9250, 13 9350 / 9360 / 9365, 15 9550 / 9560, Latitude 5480 / 5580 / 7275 / 7280 / 7370 / 7480 / 7520 / 7720 / E5570, Precision 3520 / 15 3510 / 5510 / M7510, 17 M7710, Alienware 13 / 15 / 17
SATA COMPATIBLE with SSD, HDD and SSHD drives from 250GB to 10TB+ such as the SanDisk Extreme Pro, Samsung 850 EVO, Seagate 10TB BarraCuda Pro, WD Red 8TB NAS and more
Description
Dock Your DataThe Cable Matters USB 3.0 SATA Hard Drive Docking Station is the perfect choice for managing your 2.5" or 3.5" HDD or SSD without any tools or special software. Connect it to your computer or notebook to add memory storage or recover data at up to SuperSpeed USB 3.0 data transfer rates.
Thunderbolt 3 and USB-C Compatible
Both USB-C to B and USB 3.0 to B cables are included for maximum compatibility.
OS Compatibility
- Supports Windows XP/Vista/7/8/8.1/10
- Supports macOS 10.4-10.13
- Supports some Linux kernels
Computer Compatibility (partial list)
- Acer Aspire Switch 12 S/R13, V15/V17 Nitro, TravelMate P648, Predator 15/17/17X, Chromebook R 13, ASUS ROG GL/G5/G7/GX/Strix, ZenBook Pro UX501VW, ZenBook 3 Deluxe/Pro, Transformer 3 Pro, Schenker XMG, Q524UQ 2-in-1 15.6, Chromebook Flip C302, Gigabyte Aorus X5 15, X7 DT 17, BRIX/BRIX S, Razer Blade/Stealth/Pro, Samsung NP900X5N, Notebook Odyssey, Notebook 9 15 Inch, FUJITSU Workstation CELSIUS H760 HP Elite X2 1012 G1/G2, Z1 Workstation G3, Spectre 13.3/x360, EliteBook 1040 G4/X360 G2/X 360 1020 G2/Folio G1, ZBook 17 /15 /Studio, Envy 27 All-in-One, Lenovo Legion Y720, IdeaPad Y900, Miix 720, Thinkpad P 50/70, T 470/470S/570, X270, X1 Carbon, X1 Yoga, Yoga 370/900/910, MSI Phantom Pro, Ghost Pro, Stealth Pro, Titan Pro, Dominator Pro, Vortex G65, LG Gram 15Z970, Intel NUC6i7KYK/NUC7i7BNH/NUC6i7KY, Toshiba Protege X20W, Sony VAIO S11, Clevo P 750DM/770DM/870DM
Specifications
- SATA I/II/III support
- Any capacity 2.5in and 3.5in drives
- LED: Blue
- Power: 12v 2A Adapter
Package Contents
- USB 3.0 SATA Hard Drive Docking Station
- USB 3.0 to B cable
- USB-C to B cable
- Power Adapter
- User Manual
Warranty
One-Year Warranty
8. WEme USB 3.0 to SATA Dual-Bay External Hard Drive Docking Station with Offline Clone/Duplicator Function for 2.5 & 3.5 Inch HDD SSD SATA (SATA I/II/ III) Support 2X 8TB & UASP, Tool-Free
Feature
USB 3.0 external, SATA-III internal, Especially made for 2.5 inch and 3.5 inch SATA HDD/SSD, USB 3.0 SuperSpeed & supports UASP, even faster data transferIntegrated safeguards preventing overvoltage, leak currents, short circuits and peak voltage, interference and disturbance, guaranteed safer data transfer and access
Support 2x 8TB hard drive; Support offline clone, no drivers needed, easy installation; Cloning can only be done from A drive to B drive, make sure the memory capacity of B drive is larger than A drive;Not Support Online Clone
Stable and reliable DC power source: The power supply is highly efficient (12V, 3000mA), so that a stable energy supply is guaranteed; Entering sleep mode without operation in 30 minutes
Package Includes: 1 X USB3.0 TO SATA Dual BAY Docking Station ; 1x USB 3.0 Cable; 1x 12V/3A Power Adapter; 1x manual
Description
HDD/SSD Off-line DuplicatorWhen cloning a hard drive, no PC is required - just plug both hard drives, press "Copy" button for several seconds until the LED will start flashing and the cloning process will begin. Progress indicator with LED: 25% - 50% - 75% - 100%.
Support UASP and SATA 6Gbps Available - The UASP Transfer Protocol only can accelerate read and write speed of SSD and HDD
High-class chipset, enhanced with UASP Transfer Protocol,this dock lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps) with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller.
Features
- Support offline clone, no drivers needed, and easy installation
- Support 2x 8TB hard drive; Supports 2.5" & 3.5" SATA (SATA I/ II/ III) HDD and SSD
- Equipped with USB3.0; Support SATA III (6 Gbps) and UASP for optimal performance; Backward compatible with USB 2.0 /1.1
- Compatible Systems: Windows 2000/ XP/Vista/ 7/ 8,Mac OS 10.x or higher
- On/Off power switch; LED light indicates Power and Activity status; Entering sleep mode without operation in 30 minutes
Attention
- Cloning can only be done from A drive to B drive, make sure the memory capacity of B drive is larger than A drive
- Not Support Online Clone
- The target disk must be larger than the source disk.
- Please backup files in target hard drive before cloning. Any files in target hard drive will be overwritten when offline clone works.
- Please make sure that there aren't any bad sectors on the drives in use, as to avoid data transfer errors, overheating and damage to the station.
- Do not try to remove your HDD or SSD device while it is active. Please power off the docking station before removing.
9. Inateck USB 3.0 to SATA Dual Bay Hard Drive Docking Station in Gamer Style with Offline Clone Function fit 2.5/3.5 Inch SATA I/II/III HDD and SSD, Support UASP and 8 TB Drives, Black(FD2005)
Feature
16 TB Capacity: Support up to two 8TB SATA 2.5/3.5 hard drives simultaneously with this attractive gamer style design. Easy-to-use offline cloning function.High-class Chip ASM1156: UASP and SATA III compatibility support 6 Gbps transfer speeds! Superspeed USB 3.0 supports 5 Gbps transfer speeds; 10x faster than USB 2.0!
Compatible OS: Compatible with Windows XP/ VISTA/ Windows 7/ 8 /8.1/ 10/ Linux/ Mac OS.
User Friendly: Transfer data without the hassle of drivers or installations with the lastest hot swapping/plug and play technology. Also, it will enter sleep mode after 30 minutes of inactivity.
Heres what youll get: 1x USB 3.0 Docking Station; 1x USB 3.0 Type-B to USB 3.0 A Cable(1.2m); 1x DC Power Supply(12V, 3A); 1x Multilingual User Manual.
Description
Supports up to 16 TB
Inateck's attractive gamer style FD2005 is an excellent solution for transferring and organizing data on SSD & HDD SATA drives. It features two docking ports that can be used simultaneously and support drive up to 16 TB!
Offline Cloning
Don't have a computer? No problem! FD2005 supports computer free offline cloning!Only offline clone can be supported.
UASP Superspeed
We've included the ASM1156 chip in it. This supports UASP,whichmeans dependable, high-quality data transfers to and from your external hard drive at speeds up to 6 Gbps!
Auto-Sleep Function
The FD2005's automatic sleep function is an excellent feature. It conserves energy and prevents overheating, but this wasn't enough. We had to make sure this feature was user friendly and we did just that using an intuitive LED lighting system.
Intuitive LED Lighting System
The left-hand light and right-hand light will turn blue respectively when either Disk A or Disk B are inserted, and will flash when either is activated. Four blue LED lights clearly track your data's progress during offline cloning from 25% to 50%, 75% and finally 100%.
Attention
-The target disk must be larger than the source disk.
-Please backup files in the target hard drive before cloning. Any files in target hard drive will be overwritten when offline cloning occurs.
-To avoid data transfer errors, overheating and damage to the device please make sure that there are no faulty driver cells.
-To avoid data loss, do not remove or insert drives when one drive is working in the docking station. Please power off the docking station before removing.
10. Jeystar All In 1 2.5" 3.5"IDE SATA HDD Hard Drive Disk Clone Holder Dock Docking Station,One touch backup function HDD Docking Station Clone
Feature
Type: Multi - function / all in one HDD docking ,Standable, Convenient and Trendy Design,Plug and Play,Item Color: Black and RedCompatible with USB 1.1, USB 2.0, SATA I, and SATA II,Support IDE and SATA hard disk, Plug standard: US,Interface: 1 x USB 2.0
Power LED indicators,Power input: 100-240V, 50-60Hz , Output: 12V ,Support Win 7, Windows 98/98/SE/ME/2000/XP/VISTA and MAC OS 9.X, or above.High quality
Hi speed USB2.0 Data Transfer Rate Up to 480Mb/s(Max), SATA II Transfer Rate Up to 1.5GB/3GB/s.
One Touch Backup (OTB) function (on USB port only).,Package size: 19 * 12 * 11cm / 7.48 * 4.72 * 4.33in,Package : 1 Set
Description
Convenient and trendy design.Support IDE and SATA hard disk.
Hi speed USB2.0 Data Transfer Rate Up to 480Mb/s(Max), SATA II Transfer Rate Up to 1.5GB/3GB/s
Support 2.5 inch 3.5 inch SATA hard disk of any capacity.
One touch backup function (on USB port only).
Plug and play, easy to use
LED indicator to show the power and hard disk situation.
Compatible Hard Disk:
For Maxtor IDE 80GB above, For Seagate IDE 40GB above,For Hitach IDE 40GB above
For Samsung IDE 40GB above
NOT FOR Western Digital (WD) Hard Disk and Not For Windows 8 System
Hard disk is not included! Package List:
1 * HDD Docking Station
1 * Power Cable
1 * USB Cable
1 * CD
1 * User Manual (English)
Recent Comments