Which is the best direct extruder?
Finding your suitable direct extruder is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best direct extruder including detail information and customer reviews. Let’s find out which is your favorite one.
1. Redrex Assembled MK8 Extruder 0.2/0.3/0.4/0.5mm Print Nozzle Hotend for MakerBot Prusa i3 Reprap 3D Printer
Feature
Compatible with most prusa 3d printers with some slight modifications,if you would like to install on Anet A8,please cut the thumb bar of the extruder frame for carriage mounting.Filament size: 1.75mm PLA/ABS or other 3d print materials.
Flow rate of Nozzle:Max 100mm/s,Support for high speed printing.
Nema 17 high quality stepper motor with larger torque and less heat buildup.
Special ceramic insulation cotton ensures the stability of heating.
Description
NOTE:Make sure the maximum temperature is less than 280C
Thermistor sensor is risky demaged if it is fasten too tight.And please do not be panic if it is fallen out as arrived ,it is easy to reset.
Compatible with most prusa 3d printers with some slight modifications,if you would like to install on Anet A8,please cut the thumb bar of the extruder frame for carriage mounting.
Specification:
Default extrusion nozzle:0.4mm ;0.2/0.3/0.5mm optional
The material of Print: 1.75mm PLA/ABS/Wood/Flexible
The flow rate of Nozzle: about 24cc/h
The voltage of heating element: 12V
Thermistor: NTC 100K
Cartridge heater: 12V,40W
The operating voltage of cooling fan: 12V
Stepper Motor:NEMA 17
Number of Phase: 2
Step Angle: 1.8 deg.
Rate Voltage: 3.3V DC
Holding Torque:1.5A
Phase Resistance: 2.2ohms10%20
Motor Torque:40Ncm/57.1 oz.in
Phase Inductance: 3.8mH20%(1KHz)
Net weight: 480g
Normal working temperature: 190-230C
Package List:
1xMK8 Extruder(0.4mm nozzle)
1x0.2mm MK8 nozzle
1x0.3mm MK8 nozzle
1x0.5mm MK8 nozzle
2. CHPOWER CR-10 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality CR-10, CR-10S, CR-10 S4, CR-10 S5, RepRap Prusa i3, 1.75mm
Feature
UPGRADE: Perfect replacement for Creality 3D Printers ENDER3, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New "Metal Anodised Aluminum" Upgrade Kit.STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.
EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.
ADVANTAGES: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers' performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
Trusted Vendor: CHPOWER is a TRUSTED VENDOR, we provide LIFETIME manufacturer warranty on all parts. Buy with confidence.
Description
Description:This modified MK8 Extruder has a filament guide tube, all screws, spare drive gear, and upgraded Bowden tube fitting, for CR 10 3D Printer. Our design gives complete support of flexibles from the intake and output ends. We've reduced the price and complexity of printing flexibles. It will also allow to print faster with sustained quality and no risk for grinding the filament.
Frankly, it looks amazing, and performs better than the plastic version included in stock printers. It allows you to print flexibles, and regular plastic filaments.
Also included is an upgraded bowden tube fitting, which does not slip, as the stock one can. Every screw and washer we would recommend for this installation is included.
Features:
This extruder set is great for Creality 3D CR-10.
Made of high quality metal material.
Easy and convenient to use.
With high quality and durable performance.
100% brand new and in good condition.
Color: As pictures show.
Main material: Metal
Included:
1x Creality 3D - Extruder Upgrade Kit
Note -Important: We have offered a detailed installation step diagram as the installation is very simple, please check the image NO.6 if need.
3. TEVO Titan Extruder Full Kit with NEMA 17 Stepper Motor for 3D Printer ssupport both Direct Drive and Bowden Mounting Bracket(Package five)
Feature
Type: Titan ExtruderDescription
TEVO Titan Extruder Full Kit with NEMA 17 Stepper Motor for 3D Printer ssupport both Direct Drive and Bowden Mounting BracketPackage one: TEVO Titan extruder
Package Two: Titan Step motor
Package Three: TEVO Titan Extruder+ Stepper motor
Package Four: TEVO Titan Extruder + Stepper motor+V6 Direct Hotend
Package Five: TEVO Titan Extruder+ Stepper motor+ Volcano Bowden Hotend
Product name: Titan Extruder
Filament diameter:1.75mm
Product name: Titan stepper motor
Size:42*42*23mm
Heater: 24V
Thermistor: 100K NTC 3590
Product name: Titan step motor
Size:42*42*23mm
Phase: 2 Phase
Voltage: 12V
Current: 0.7 A/Phase
Resistance: 4.0 10%/Phase
Inductance: 3.2 20% mH/Phase
Holding Togque: 14 N.cm
Insulation Class: B
Step Angle: 1.85% /STEP
Specification:
TEVO Titan Extruder has gone through real machine testing for over a month with over 200 hours printing time. Easy to assemble, can start printing within 15 minutes.
Interchangeable connector, can replace with your preferred model. Support both direct drive mode and bowden
Reminder, you need stepper motor with D shaft to use with TEVO Titan Extruder.
4. TEVO Titan Extruder Full Kit with NEMA 17 Stepper Motor for 3D Printer ssupport both Direct Drive and Bowden Mounting Bracketpackage four)
Feature
Package Four: TEVO Titan Extruder + Stepper motor+V6 Direct HotendTitan Extruder
Description
TEVO Titan Extruder Full Kit with NEMA 17 Stepper Motor for 3D Printer ssupport both Direct Drive and Bowden Mounting BracketPackage one: TEVO Titan extruder
Package Two: Titan Step motor
Package Three: TEVO Titan Extruder+ Stepper motor
Package Four: TEVO Titan Extruder + Stepper motor+V6 Direct Hotend
Package Five: TEVO Titan Extruder+ Stepper motor+ Volcano Bowden Hotend
Product name: Titan Extruder
Filament diameter:1.75mm
Product name: Titan stepper motor
Size:42*42*23mm
Heater: 24V
Thermistor: 100K NTC 3590
Product name: Titan step motor
Size:42*42*23mm
Phase: 2 Phase
Voltage: 12V
Current: 0.7 A/Phase
Resistance: 4.0 10%/Phase
Inductance: 3.2 20% mH/Phase
Holding Togque: 14 N.cm
Insulation Class: B
Step Angle: 1.85% /STEP
Specification:
TEVO Titan Extruder has gone through real machine testing for over a month with over 200 hours printing time. Easy to assemble, can start printing within 15 minutes. Interchangeable connector, can replace with your preferred model. Support both direct drive mode and bowden
Reminder, you need stepper motor with D shaft to use with TEVO Titan Extruder.
5. FX Treasures Metal J-Head V6 Hot End Hotend Extruder for 3D Printer 1.75mm Filament Direct Feed Extruder 0.4mm Nozzle With 12V fan
Feature
Lastest technology,stable and reliable performance, to make J-head Hotend more durable.This 3D Printer J-head Hotend is applied for 1.75mm Filament E3D.
J-head V6 high temperature stable extrusion head
Metal construction with PTFE liner inside, good for ABS, PLA and other conventional print materials
12V 40W heater, 12V high speed fan with shroud, NTC 3950 pre-wired thermistor
Description
stable and reliable performance, to make J-head Hotend more durable.Feeding mode: Short distance
Nozzle diameter: 0.4mm
12v cooling fan, Fan size: 30X30X10mm
Heat tube:12V 40W, length 1 meter
Thermistor:100K NTC B 3950 1% ,length 1 meter
This 3D Printer J-head Hotend is applied for 1.75mm Fiament E3D short-Distance Filament Wade extruder
Pacage Content:
1*J-head V6 Hotend(one set)
6. TEVO Titan Extruder Full Kit with NEMA 17 Stepper Motor for 3D Printer Support Both Direct Drive and Bowden Mounting Bracket (Package One)
Feature
Package one: TEVO Titan extruderPackage Two: Titan Step motor
Package Three: TEVO Titan Extruder+ Stepper motor
Package Four: TEVO Titan Extruder + Stepper motor+V6 Direct Hotend
Package Five: TEVO Titan Extruder+ Stepper motor+ Volcano Bowden Hotend
Description
TEVO Titan Extruder Full Kit with NEMA 17 Stepper Motor for 3D Printer ssupport both Direct Drive and Bowden Mounting BracketPackage one: TEVO Titan extruder
Package Two: Titan Step motor
Package Three: TEVO Titan Extruder+ Stepper motor
Package Four: TEVO Titan Extruder + Stepper motor+V6 Direct Hotend
Package Five: TEVO Titan Extruder+ Stepper motor+ Volcano Bowden Hotend
Product name: Titan Extruder
Filament diameter:1.75mm
Product name: Titan stepper motor
Size:42*42*23mm
Heater: 24V
Thermistor: 100K NTC 3590
Product name: Titan step motor
Size:42*42*23mm
Phase: 2 Phase
Voltage: 12V
Current: 0.7 A/Phase
Resistance: 4.0 10%/Phase
Inductance: 3.2 20% mH/Phase
Holding Togque: 14 N.cm
Insulation Class: B
Step Angle: 1.85% /STEP
Specification:
TEVO Titan Extruder has gone through real machine testing for over a month with over 200 hours printing time. Easy to assemble, can start printing within 15 minutes. Interchangeable connector, can replace with your preferred model.
Support both direct drive mode and bowden
Reminder, you need stepper motor with D shaft to use with TEVO Titan Extruder.
7. Genuine E3D V6 All-Metal HotEnd-3mm-Universal - Direct Drive-Metal Only (V6-300-D-MO)
Feature
Genuine E3D PartsThe E3D V6 Hot End: Smaller, Easier, High Performance
High Temperature Performance
The V6 can comfortably reach 300C
Low bulk in X/Y dimensions
Description
Print the Widest Possible Range of Materials
The signature all-metal design allows you to reliably print high temperature materials, and it has added extra functionality with soft and flexible filaments. This opens up a huge range of new opportunities for your printer.
High Temperature Performance
The V6 can comfortably reach 300C. By swapping a thermistor for a thermocouple (may require additional electronics) or PT100 you can reach over 400C. This not only allows you to print extremely high temperature materials like Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated with PEEK/PTFE designs. The PTFE filament guide inside the V6 HotEnd is never subjected to high temperatures, so there is no risk of damage through overheating.
Compact
E3D focussed on cutting as much bulk from the E3D V6 as possible. This means an overall length of just 62mm, and low bulk in X/Y dimensions!
Easy to Use
The new thermistor cartridge simply slides into place and is secured with a single screw. High temperature glass is used in the sleeving to insulate the thermistor legs as well. This makes installing or removing the thermistor a quick and clean process compared to previous methods involving fiddly taping.
High Quality Printing
E3D kept the sharp thermal transition that gives the high quality printing performance users have come to expect from E3D HotEnds. A sharp thermal break gives better control over filament output so you get more immediate start and stops when extruding as well as retracts that are more effective in combating ooze. This means sharper, more accurate prints that have less stringing, oozing or blobbing.
Adaptable
The V6 is a fully-integrated part of the E3D Ecosystem. E3D's nozzles and blocks give more opportunity to choose how to print.
8. BALITENSEN MK8 Drive Gear Direct Extruder Drive 5mm Bore for Reprap Extruder Effective Dia 7mm Mk8
Description
Material: Stainless Steel
Outer Diameter: 9mm
Height: 11mm
Effective diameter: 7mm
Shaft/Bore: 5mm
Package:
5x MK8 Drive Gear
Recent Comments